Your cart is empty.
Your cart is empty.
Features:
Fits: Traxxas 1/10 Slash 2WD ,1/10 Stampede 2WD,1/10 Rustler 2WD,1/10 Ford F-150 Raptor,Bigfoot 2WD,1/10 Nitro Slash 2WD
Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance.
Replacement of stock # 3736 Caster blocks,# 3632 Caster blocks,# 3752 Stub axle carriers,# 1985 PTFE washers,# 5116 5x11x4mm bearings
Color：Navy Blue
Package Included:
2 x Steering blocks(L/R)
2 x Caster blocks(L/R)
2 x Stub axle carriers(L/R)
8 x 5x11x4mm bearings
8 x PTFE washers
6 x Suspension Screw Pins
2 x Screws
Allen
2025-08-28 18:33:46
Fit is same as stock with the exception of in the rear where I needed to use one of the white shims between bearing carrier and a-arm. All screws and screw pins are correct length. Match your old hardware with the new as you go. If you have XL-5 or RPM camber links you will need to reuse your shoulder screws. Be sure to use blue lock tight anywhere screws thread to metal. C-clip pin on front is replaced with screw pin that goes in from bottom of caster block. Check the length so you don’t use the one that is too short. The short one is the pivot pin that holds caster blocks to front a-arm. Color matches Traxxas color pretty good but the parts have a bit of texture that gives them a matte appearance. Can’t beat the price and quality compared to the name brand.
Dirk Hicks
2025-08-24 10:29:50
I had a camber plate snap during a bash session and since these were available with next day delivery, these are the ones I picked. And they are very high quality. Assembly went smoothly as the machining is incredibly precise. Even seems to handle a little better even though I don’t think it was bad stock.
Glenn Shepherd
2025-07-17 13:47:18
Came with fresh bearings, all hardware need to install, came with washers as well, and they look really nice on my slash. Well worth the price.
Satz
2025-07-16 16:15:06
These are nice looking, and appear to be well made. Nice that they include bearings. Time will tell on longevity.
Katie Simpson
2025-07-15 15:45:46
good product little play in them but overall nice kit would recommend
Quinn Garringer
2025-06-18 18:07:59
Just got it installed, haven't seen the durability yet. Looks clean.
Zac
2025-06-17 13:05:02
These have much less slop than other brands I’ve tried
Julius
2025-04-22 16:15:44
Good: Look cool, pretty light, arrived quick, good bearings, great that it came with extra hardware!Not good: use lock tite on metals, n I guess that's about it.
Donald
2025-03-07 16:37:26
Broke my plastic parts on a jump. I've done several aggressive landings and haven't bent anything yet, I'm VERY impressed
Kimberley Beregrove
2025-02-23 12:28:16
I put them on my 3s brushless Traxxas Stampede with 17mm adaptors and 6" Proline Trencher tires. They handle the beating I give them at -25°C in the snow with no signs of wear or cracking.
Devon Liggatt
2024-12-22 09:48:10
Worked perfectly, easy to install and smooth motion
WC BOYT..
2024-12-16 16:01:06
I have used alot of steering components from Amazon and they were all worked ok but often had poor machining with alot of play but surprising enough the Coda version here had the best with no play even better then stock with a great finish . Would recommend this brand over all others .
Darren Ramsay
2024-11-14 12:34:19
These are very well made, look great, are super strong, and priced really low for the quality that you get. The only thing that I suggest is, make sure to Loctite the screws. I ended up losing one because it came loose. This is pretty common for any metal parts/screws that do not have Loctite applied.
Recommended Products
