- Home
-
All Categories
- Musical Instruments
- Home & Kitchen
- Electronics
- Tools & Home Improvement
- Toys & Games
- Industrial & Scientific
- Automotive
- Baby
- Sports & Outdoors
- Computers & Accessories
- Clothing, Shoes & Jewelry
- Office Products
- Pet Supplies
- Arts, Crafts & Sewing
- Kitchen & Dining
- Grocery & Gourmet Food
- Patio, Lawn & Garden
- Health & Household
- Appliances
- Cell Phones & Accessories
- Sports Collectibles
- Camera & Photo Products
- Payment
- About Us
- FAQ
- Privacy Notice
- Shipping & Returns
- Contact Us
Your cart is empty.
Your cart is empty.Product Description

When using home or car audio systems, it is inevitable to encounter the buzzing noise known as "electrical noise" coming from the speakers. This noise can greatly affect your user experience and make it unpleasant.
In fact, the "electrical noise" we hear does not refer to a single type of noise, but rather different types of noises with different causes and solutions.
The first common type of "electrical noise" is the hissing sound coming from the speakers.
This "electrical noise", characterized as a hissing sound from speakers, is a common issue referred to as the background noise in audio systems. This noise is intrinsically linked to the quality of the audio equipment. High-quality systems typically produce less of this noise, while cheaper, lower-quality systems may emit a more noticeable hissing sound.
This background noise becomes more pronounced as the volume level increases. As you turn up the volume, the background noise also gets amplified, making it more distinct and potentially disruptive to the listening experience.
A common misconception about this issue is that it can be mitigated through adjustments to the audio system's settings. However, this is not the case. The background noise is inherent to the system's quality, so In dealing with this issue, options are limited. Users can either tolerate the noise or replace the audio system equipment.
The second common type of "electrical noise" is the unstable noise that fluctuates in volume or occurs intermittently.
This noise is mainly caused by electromagnetic interference during signal transmission, which means there is poor shielding.
There are two main reasons for this situation. First, it could be due to poor quality signal cables with inadequate shielding density, resulting in interference and noise. In this case, replacing the cables with higher quality ones is required. Second, it could be caused by high-impedance unbalanced signals, such as those from electric guitars or electric basses. When these signals are transmitted over a distance longer than 10 meters, they are prone to interference and noise.
To address this, a DI box should be added on the end closer to the signal source to convert the high-impedance unbalanced signal to a low-impedance balanced signal before connecting it to the mixing console.
The third most common type of "electrical noise" is a strong humming noise known as Hum noise.
This noise occurs when the grounding points of two audio devices are not at the same point.
Due to the difference in wiring resistance, the noise enters the audio devices through the ground wire, causing interference and noise. We call this common ground noise. This noise often appears in car audio systems, home speakers, radio stations, and recording studios.
To solve this problem, you can connect the FMUSER audio ground isolation device between the audio devices.
The principle of the audio ground isolation device is to use an isolation transformer to cut off the direct connection of the ground wire in the audio line, thus avoiding the occurrence of common ground noise.

Eliminate Ground Loop Noise with the FMUSER Ground Isolator
Say goodbye to annoying ground loop noise with the FMUSER Common Ground Isolator! This powerful little device wipes out ground loop hum while preserving the rich, deep bass and volume of your music. Enjoy crystal-clear sound the way it was meant to be heard, with zero distortion and maximum impact.
P.S.
The FMUSER audio ground isolation device can only eliminate the noise caused by the common ground of electrical products, and it cannot eliminate other noises such as audio equipment background noise or RF interference. We can test whether the noise is caused by common ground noise using the following methods:
.
- Connect passive headphones to the audio source device. If there is no noise, but there is noise when connecting to the speaker system, it indicates common ground noise. Installing an audio ground isolation device can solve this.
- In car audio systems, if there is noise after starting the car, and the noise gets louder as the throttle increases, it is common ground noise. Installing an audio ground isolation device can solve this.
.
Pinpointing the source of audio noise can be quite complex, and it's important to determine if the issue is due to audio ground loop problems. We recommend that you first test whether the noise is caused by a common ground issue before purchasing our FMUSER Audio Ground Loop Isolator.
.
If you suspect that ground loop noise is the culprit, our isolator is designed to specifically address this problem and could be the perfect solution for your needs. Should you find that it doesn't resolve your issue, you are welcome to initiate a return. Your satisfaction is our priority, and we are committed to helping you achieve the best possible audio experience.
Connection Method
RCA to RCA
Aux to Aux
RCA to Aux
Aux to RCA
Specification
Input impedance range | 6000-10kΩ |
Output impedance range | 6000-10kΩ |
Frequency response | 20Hz -20KHz |
Distort | <0.5dB (ref 1khz 1V rms) |
Insulation voltage | DC 1000V |
Insulation resistance | 100MΩ |
Isolation voltage | AC 0~1500V / 50~60Hz |
$14.14 $14.14
$ 6 .99 $6.99
$8.99 $8.99
$ 3 .99 $3.99
$11.99 $11.99
$ 5 .99 $5.99
$23.03 $23.03
$ 10 .99 $10.99