Shopping Cart

Your cart is empty.

Your cart is empty.

Readytosky 35A ESC 2-6S Brushless ESC Lipo BLHeli_S Brushless Electronic Speed Controller Support D-Shot 150/300/600 for FPV Drone RC Helicopter Quadcopter(4PCS)

4.7 (5) Write Review
Free shipping on orders over $29.99

$39.99

$ 20 .99 $20.99

In Stock

1.Color:35a Esc Blheli_s 2-6s


  • Using the latest EFM8BB21F16G high speed control chip. By default, the hardware for PWM is turned on and the Damped Light hardware for PWM drives the motor. The noise is low and the throttle response is smoother.
  • The ESC supports BLHeli-S and DShot 150/300/600 digital throttle. It has strong anti-interference ability and fast response capability.
  • A 6-layer, 3-ounce copper-thick and high-quality for PCB is adopted, and the layered layout of large current and small control signal is adopted to Enhance the anti-interference ability. The gold plating process on for PCB surface can effectively improve the current resistance and heat dissipation ability of ESC.
  • Integrated for RGB multi-color bright LED night light, night flight is even more dazzling.
  • Damped Light mode, regenerative braking function, make motor deceleration more sensitive and effective, control more precise; Active continuous current technology, so that the battery recovery power, prolong the duration.


Product Description

35A ESC

Readytosky 35A ESC 2-6S Brushless ESC Lipo BLHeli_S Brushless Electronic Speed Controller Support D-Shot 150/300/600

  • Item: 35A Brushless BLHeli_S ESC 2S-6S
  • Designed for FPV Drone RC Helicopter Quadcopter
  • Voltage: Support 2-6S power supply
  • Working current: 35A: Continuous current 35A, peak 45A/10s
  • Support protocols: dshot 125/300/600, oneshot 125
  • Power cord length: 18AWG 90mm
  • Signal line length: 150 mm

35a esc

Using the latest EFM8BB21F16G high speed control chip. By default, the hardware for PWM is turned on and the Damped Light hardware for PWM drives the motor. The noise is low and the throttle response is smoother.

35A ESC

A 6-layer, 3-ounce copper-thick and high-quality for PCB is adopted, and the layered layout of large current and small control signal is adopted to Enhance the anti-interference ability. The gold plating process on for PCB surface can effectively improve the current resistance and heat dissipation ability of ESC.

35A ESC

Damped Light mode, regenerative braking function, make motor deceleration more sensitive and effective, control more precise; Active continuous current technology, so that the battery recovery power, prolong the duration.

35a esc

Package list:

4Pcs 35A brushless ESC


Gali
2025-05-28 12:16:07
These esc have a very small formfacture and still give a lot of power great for fpv racing I got mine on my fpv. I love how the drone feals very Responsive and will definitely put me up a notch on my racing game. the quality looks great so they should last for a long time and won't have my drone just fall out of the sky in middle of a race
JeremyMcG
2025-05-18 14:05:48
3 of the 4 only worked at about 25% while at full throttle. Calibration was done multiple times with no luck. The first one I installed was great, then after the next 3 are crap.
Andrew Godwin
2025-04-17 18:42:25
I ordered 8 of these, and of those, 4 don't drive the motors properly - they cut out as soon as they spin up above a certain RPM (tested in both PWM and DShot modes). The other 4 work fine for now, but I don't really want to entrust an aircraft to these.
K Gray
2025-01-03 16:35:13
I bought these ESCs to replace my broken 4 in 1 ESC. They are rated for 45A while my 4in1 is rated for 50A, but I got them anyways, which was a good choice! They handle the current easily with a 4S battery and 2203 2400kv motors. I have no complaints at all; they just did their job well!
tully
2024-12-11 16:34:52
Really nice light esc that's looks like great quality also it's so responsive that it make my drone fry around objects so much better. And the low low price its amazing so very happy with my new better toy