Your cart is empty.
Your cart is empty.Josh Baugh
2025-07-21 11:31:53
You really need to understand wiring diagrams and what your doing i found diagrams for my 83 Honda night hawk online and was able to write anything so it works. With some trouble sitting i got the roms correct and the mph
Ed
2025-07-09 11:13:42
The speedometer is not compatible with a 1982 Suzuki GS850G motorcycle.
Camilo
2025-06-03 13:33:23
Sin una sola pizca de duda, un buenÃsimo y realmente bonito velocÃmetro, ha trabajado demasiado bien y aún siendo que ha Sido puesto a prueba durante estos años, excelente!
Eddie
2025-05-05 14:37:00
Matched the connector style my 250 had. The installed connector was the same as the bike side but it did come with the other end and a few pins. I ended up ordering more pins to make a clean job. It also included instructions which were correct, all the color codes matched the function. I matched the speedometer connector to the bikes configuration to make it plug and play. My 250 has neutral, L/R signal, highbeam, fuel, RPM, oil and a water trip point. This shows an oil light but it doesn't have a wire for it so I'm not sure what it goes off by. My bike has a water temp switch not a sensor so it doesn't actually read temp so I wired this to the 6th gear indication, I wired the oil sensor to the engine light and my harness had a RPM wire which worked perfectly in the 1cyl setting. The fuel sensor also worked correctly. My bike doesn't have a live wire so I had to run one from the battery and pinned it to the oem connector. I used the include brackets and mounted it to screws below the triple clamp and then bent them upwards to give it a better angle. The unused wire I cut the pins off and hid them under the sleeve. Everything functions as it should.Update: 50miles in and everything still working. I ordered 2 bolts with magnets in them and replaced them on my brake rotor. It wasn't reading speed at first, I had to flip the magnets on the bolts and it works now.
Aj
2025-04-01 10:25:18
It cannot withstand any form of water. Been havin issues with the back light staying on and there seems to be some moisture on the screen. I only wash my bike with a bucket and yet still water managed to get in
Falta sensor de velocidad y los images
2025-03-12 15:24:05
Falta el sensor de velocidad
Erika
2025-02-25 17:12:40
The media could not be loaded.
James
2025-01-06 11:49:31
Once I figured out what goes where from old bike to new panel. Everything works great.I can't seem to get the clock going through. Keeps resetting to 12 every start up
Recommended Products