Your cart is empty.
Your cart is empty.Product Description
32.8ft 3 PIN LED EXTENSION CABLE
- Connector Type: 3 pin
- External Material : PVC plastic
- Interal Material: copper
- Rated Temperature๏ผ80โ
- Rated Voltage: 0-300V
- Rated Current: 0-2A
- What You Get:
- 10Pcs 3pin 8mm LED strip to wire connectors
- 32.ft 3pin led extension cable
RGBZONE 3 Pin 8mm LED Connector Kit
10Pcs 3-pin 8mm LED Strip to Wire Connectors
- Those crystal connectors are made of high quality PC material,which uses upgraded design to make them suitable for IP20/IP65 LED strip lights.
- Upgrade design does not need to be welded, the connection is firm and stable, the light strip never fall off.
- Only suitable for 8mm wide SMD 5050 dream color LED strip light(with 3pin) perfectly.
- Convenient and very easy to use without soldering.
- Rated voltage: 0-36V
- Rated current: 5A
- Interface type: 3pin
- Working PCB width: 8mm
- Working environment temperature: -20~50โ
Caleb M.
2025-09-07 14:10:47
Used these to connect some under the counter led lights. Worked great! No soldering, just used the provided clips.
spark#1
2025-08-20 18:34:41
This is exactly what I was looking for. The prongs clamp down into the extension wires and into the tape light. No need to strip back wires or plastic on the tape light. You canรขโฌโขt get it wrong, itรขโฌโขs so easy to use. No tools needed. The wires and tape are nice and tight once clamped down. They are definitely not coming off. Great connectivity.I used the 3 prong (pin) 10mm for my Feit Electric LED Under Cabinet Tape Light for a perfect fit.
BG
2025-07-24 15:18:34
Added some LEDs to the underside of kitchen cabinets and used this kit to span areas with larger gaps between LED strings like microwave, window, etc. The wire is nice and small and works well, but the quick connectors didn't work well for me. The connectors are easy enough to use, but have to be aligned JUST right. Even then they are finicky. I ended up removing the connectors and soldering the wires to the LED strings instead. A little more work but far better in the long run, and less bulky.
Fuzms
2025-05-25 16:39:46
My new favorite type of connectors. Also the cord blends in with my white shelves so that's great!
Craig Myers
2025-05-20 09:04:42
Yes, I bought the right width and right number of connections. It pierces the strip but the wire that came with it didn't even fit in the wire side of the connector. Had to pull the conductors apart to get them to fit in the grooves. Installed the first jumper between the first 2 strips and nothing. Measured voltage and nothing. Gave up on the cheap connectors and just soldered the wire directly to the strip and now they all work perfect. Look elsewhere or just buy the wire and solder it direct.
Tony Krizek
2025-04-10 20:21:53
Easy to install and very bright light
justin wasserman
2025-04-04 11:37:28
Product worked for RGB LED strip lights I had laying around but did not work for my Govee RGBIC strip lights.
Adam Kraig Reeves
2025-03-19 09:45:04
Well designed and works perfectly!
Ia
2025-03-09 11:02:41
I wasn't quite sure how to use this at first. Separate the wires a little and just jam them into the little holes. I followed the pictures in the post and it worked out. Keep in mind when installing the light strip the pins in the connector should be centered on the copper points on the light strip, the connectors do stab the copper so make sure to do it right the first try for successful installation.
miss s r wood
2025-02-28 10:40:23
Purchased lepro S1 and these allowed me to extend the connections. Worked without issue.
Barb Poretti
2025-02-08 13:21:18
This can extend between two LED strips - but not between a controller and a LED strip; which is what I needed it for. Also the connections are extremely tentative on the LED strip side. You cannot handle the strip after a connector is in place or it becomes intermittent and eventually fails.When trying to correct an intermittent cable, there is no way to easily unclip from either a cable or LED strip; you might as well discard it or cut the LED strip before the connector. Really frustrating to work with, no instructions and NOT recommended.
Marie-Claude Cheney
2025-02-07 13:04:20
I was very skeptical when I received it because I've had issues with products like these for coloured striplights before. Holy crap did this work like a charm. No need to strip the wires the little adapters just push right into the cable. I did have to bend in the metal tabs on the strip light side but they provide you a tool that makes adjustments super easy. Was worried about +/- issues but with each reversal everything stayed just fine and worked. Definitely recommend.
Judy
2025-01-26 15:13:45
Works great for area it was purchased for.
Recommended Products