Your cart is empty.
Your cart is empty.Product Description
RJ45 to RS232 Console Male Cable 3.3Ft
Compatibility
Support up to 95% of switches and routers on the market, well-known brands perfectly support.
Anti-interference&High-speed
Double-shielded standard to ensure that signal transmission without interference and Oxygen-free copper transmission wire.
PIN -OUT
- The rollover console cable will help you to connect your PC to a Cisco device through the console port.
- It works with Cisco gear both new and old.This cable is identical to the one that ships with Cisco switches, firewalls, routers, wireless devices and more.
- It works with Cisco gear both new and old. Most folksuse the standard Windows Hyperterminal or some other terminal emulation software to access the Cisco IOS through the console port.
- If you have a newer laptop, it may not have the 9-pin serial port, in which case you should purchase the USB Console Cable Kit found in this same category.
Matching Suggestions
If your device does not have a serial port, we recommend buying an additional USB to RS232 cable.
Enous Johnson
2025-08-07 18:55:15
good
John Holt
2025-07-06 15:53:09
Perfect for my networking project of restoring some vintage computer equipment. Beware if you buy this, don't think it doesn't work. You may have to remove some pins from the 9-Pin connection depending on what you are doing. Just be sure to research which pins that you need to remove.
Customer
2025-07-04 16:23:03
Rapidité d’envoie
Calvin LaCoste
2025-06-27 18:03:01
Our company uses these to connect our VFD to a modem in remote areas. We have all but eliminated any issues we had with other cables and adapters. I add a ferrite core to eliminate the potential noise and this saves us thousands in unnecessary troubleshooting call outs.
Customer
2025-04-15 21:58:56
It works, nothing to complain about.
johnb85022
2025-04-02 10:41:21
Using these in my data center to connect to consoles. Working great.
JIN H.
2025-01-24 14:29:50
Good
Louie A.
2025-01-23 15:04:51
I ordered the wrong part.
Sergio
2025-01-05 15:52:54
Plug and play
Olivier B.
2024-12-31 14:32:08
I had to measure out the connections as something was off. Turns out both RJ45 pin 4 and 5 were connected to DB9 pin 5 (GND), leaving DB9 pin 1 empty.For me this was no problem as I had to rewire anyway so I cut off the RJ45 plug and attached a new one with my desired wiring.Anyway, like my title says, if you have any issues or doubts, you better check the connections using a multimeter.Other than that the quality was good.
Iceman
2024-12-20 12:41:05
Cumple con su cometido
DC67
2024-12-19 17:19:04
Good Service and product
Customer
2024-11-16 16:31:01
Bought 2 of these and neither of them worked. Tested the the pin outs and the two didn't match.
Recommended Products