Your cart is empty.
Your cart is empty. Description
Roastove 4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool
This air distributor can let you carbonate four kegs at the exact same pressure setting with a regulator.
Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
Machined from a single piece of solid aluminum,cast brass , and anti-rust chrome plated every stem. Aluminum is lighter than normal steel but still high durability and high impact resistance.
There is a 3-point screw hole on the top for easy installation to other equipment. 5/16" barbed inlet and 5/16" barbed outlets.
Josue
2025-09-03 17:28:47
Lo desarme para un proyecto a otra funcion y no para CO2 esta muy bien hecho y serviria para mi proyecto.
Michael
2025-09-02 12:01:15
Fantastic and cost-efficient
Michael
2025-08-28 17:37:26
Affordable, quality seems good, and fits great into my system
FPA
2025-08-23 14:58:49
I've tried three times to edit and submit this review. Yeah well I've given up trying to meet their community standards when I told what I've done wrong.Surface to say, there's you never be metal shavings inside a manifold. Especially when you consider a human is consuming the output of this thing!
Kevin W
2025-07-31 10:40:58
The barbs are smaller than described. Nice looking quality but the sizes mentioned are not correct
Ken O.
2025-07-29 10:59:29
I have multiple kegs in my small kegerator, usually one with sparkling water, one with juice, which needs different pressure or its foam-city. I also keep a spare keg in place tapped with CO2 getting carbonated. This manifold lets me have one tank doing triple duty. I use a double-gauged regulator for the dispensers, but with this manifold its easier (and reliable!) to tape the water line for charging the spare keg. You can do it with just a cheap splitter but every time you clean things up or move kegs around you weaken the connections, risk leaks, etc. This manifold keeps your splitter anchored solidly in place, and gives you per-line shut-offs/controls at the same time. Huge improvement over basic splitters. Huge! The block is nicely milled, the fittings are solid and clean. That it came with a full compliment of clamps was awesome! Nice touch! Can I get a 6th star for this one?
Craig Haven
2025-07-20 13:10:58
Easy to install on my kegerator and allows me to run more beer lines with just one CO2 tank, well constructed and easy to use. What and awesome product.
Odd Evaluations
2025-07-11 12:12:55
Not sure if it's on amazon or Roastove, but my original Vine Review Order did not show up. I had to order another one and get a refund. Odd.Product looks good and it will work well in my custom 5gallon conical brewing system.
Customer
2025-07-03 11:27:55
I purchased two of these to allow me to pressurize kegs outside of my kegerator. The price is half of what I could find online elsewhere and the quality seems to be the same or better than the one I have in my fridge that I paid more than twice the price for and as a bonus you get a nice set of clamps to attach your lines.
Josh
2025-06-24 18:21:30
Trying to find time to install but looks sturdy and shipping was quick
Natambee
2025-06-22 12:51:39
Works as expected no leaks
Jason
2025-06-20 14:10:44
These are great forcthe price. Note that at first the valves seem like they will not open Yiu need to hook up a tube and blow some water through them to get em working
Travel bug
2025-06-11 14:16:00
This manifold comes with hose clamps making it easy do deploy in your brewing operation, or your fish tank or other air distribution system. The valves are quarter turn quick shut off. I am only using it for low pressure systems (less than 30 psi) so I can't comment on their applicability to higher pressures. They don't leak at all at these pressures.
Josue
2025-06-10 14:24:36
Lo desarme para un proyecto a otra funcion y no para CO2 esta muy bien hecho y serviria para mi proyecto.
Michael
2025-06-07 14:03:13
Fantastic and cost-efficient
Michael
2025-06-06 11:51:01
Affordable, quality seems good, and fits great into my system
FPA
2025-05-30 16:35:02
I've tried three times to edit and submit this review. Yeah well I've given up trying to meet their community standards when I told what I've done wrong.Surface to say, there's you never be metal shavings inside a manifold. Especially when you consider a human is consuming the output of this thing!
Kevin W
2025-05-23 20:19:27
The barbs are smaller than described. Nice looking quality but the sizes mentioned are not correct
Ken O.
2025-05-20 18:53:52
I have multiple kegs in my small kegerator, usually one with sparkling water, one with juice, which needs different pressure or its foam-city. I also keep a spare keg in place tapped with CO2 getting carbonated. This manifold lets me have one tank doing triple duty. I use a double-gauged regulator for the dispensers, but with this manifold its easier (and reliable!) to tape the water line for charging the spare keg. You can do it with just a cheap splitter but every time you clean things up or move kegs around you weaken the connections, risk leaks, etc. This manifold keeps your splitter anchored solidly in place, and gives you per-line shut-offs/controls at the same time. Huge improvement over basic splitters. Huge! The block is nicely milled, the fittings are solid and clean. That it came with a full compliment of clamps was awesome! Nice touch! Can I get a 6th star for this one?
Craig Haven
2025-04-10 14:58:41
Easy to install on my kegerator and allows me to run more beer lines with just one CO2 tank, well constructed and easy to use. What and awesome product.
Odd Evaluations
2025-04-09 12:43:40
Not sure if it's on amazon or Roastove, but my original Vine Review Order did not show up. I had to order another one and get a refund. Odd.Product looks good and it will work well in my custom 5gallon conical brewing system.
Customer
2025-04-04 15:46:54
I purchased two of these to allow me to pressurize kegs outside of my kegerator. The price is half of what I could find online elsewhere and the quality seems to be the same or better than the one I have in my fridge that I paid more than twice the price for and as a bonus you get a nice set of clamps to attach your lines.
Josh
2025-03-11 10:30:08
Trying to find time to install but looks sturdy and shipping was quick
Natambee
2025-03-05 18:08:08
Works as expected no leaks
Jason
2025-02-21 11:59:14
These are great forcthe price. Note that at first the valves seem like they will not open Yiu need to hook up a tube and blow some water through them to get em working
Travel bug
2025-02-16 16:52:15
This manifold comes with hose clamps making it easy do deploy in your brewing operation, or your fish tank or other air distribution system. The valves are quarter turn quick shut off. I am only using it for low pressure systems (less than 30 psi) so I can't comment on their applicability to higher pressures. They don't leak at all at these pressures.
Recommended Products
$261.00
$ 99 .00 $99.00
$36.99
$ 17 .99 $17.99