Your cart is empty.
Your cart is empty.Gain peace of mind on the trail and overcome off-road obstacles with ease with Rough Country's Polaris RZR Winch Mounting Plate. This easy-to-install kit upgrades your UTV with essential recovery capabilities for when you need it most. Made of a durable 3/16in steel construction, this heavy-duty winch plate features dual mounting bolt patterns designed to firmly fit 3,500lb-5,000 lb winches so you can choose the exact setup you require. Each late is powder-coated black to ward off the elements and provide a long lifespan of good looks and performance. Installation is a breeze, with no drilling required! Simply bolt on this upgrade and attach your winch and you're ready for whatever the trail throws your way.
Moon
2025-07-16 09:01:05
Went on easy--fit nice
Brian
2025-06-19 15:10:30
Used to mount a badlands winch to my RZR. Worked well.
DDM4V9
2025-06-03 10:33:17
I put this mount on my 2016 that has been converted to a Turbo S front end. Was able to get this mount installed in about 20 mins from start to finish. I didnt have any fitment issues at all but I also didn't remove the front reinforcement plate. I put the fairlead mount plate right on top of the reinforcement plate. That plate ties the front upper a arm bolts to the frame. It seemed like removing it would weaken that.
Johnson
2025-05-08 16:10:43
Purchased this to go with the RC 4500lb winch on a 15' rzr 1000 xp4. First of the mount fit perfectly and seems strong. I don't know how long I'll keep this machine so I elected to save $ by going with this set up. The competition would have cost me about $475 and I was able to put this together for $250. I had to give it 4 stars cause there are some downsides but it mainly has to do with the winch side and the shody hardware and terrible instructions. I have a lot of experience installing after market parts and found this to be fairly simple but design made it time consuming. Do not attempt if you're not somewhat mechanically inclined. First off all the instruction for installing the winch and mount only come with the mount so keep that in mind. Google a you tube cause the instructions are not great, in fact they are kind of a let down and not very detailed. Hardest part of installation for the the mount is getting the bolts in as there is not a lot of room. Also the hardware is cheap. All in all I am happy cause I saved a ton of money and the mount itself is strong and seems well made. Just some minor nuisances.
Perfect fit.
2025-03-08 10:17:33
Perfect fit as advertised.
Steve hoepner
2025-02-01 14:11:23
Perfect fit and all install parts included was nice. Kit was easy to install
Ryan
2025-01-23 17:22:04
I have a 2022 rzr 1000 xp 4 and the fairlead will not fit as designed!I tried with customer service at Rough Country to find a fix but after a couple emails back and forth they will no longer respond to me. It has been over a week since my last communication to them and no response! My only option left is to disassemble everything and return which will take hours or modify my machine. Both terrible options.Will never buy from Rough Country again and will tell all my friends the same.UPDATE: more than a month and still no support or response from Rough Country!Run away, far far away!!!
Austin Russell
2025-01-15 15:35:56
Very quick and easy install. Only very minor issues I had was the holes on the fairlead that came with my winch didn’t line up but that was an easy fix
Customer
2024-12-20 17:54:30
Super easy install. Only way it could of been better is if it came with a fair lead. Takes a 6†fairlead
Stephen Slaunwhite
2024-12-12 11:28:59
Â
Tyler
2024-12-10 14:24:04
Did not fit my 2022 xp1000 premium even though it advertises it fits 14 to 22 machines. You have two options if you want to make this Mount fit your newer razor. Option one is you can cut away the front bumper fascia to fit it around the bottom part of the mount. Or option two is you cut the lower corners of the mount just enough to make it narrow enough at the bottom so the fascia fits around the mount. Picture attached showing where the cuts had to be made and approximately how much material had to be removed in order to get the fascia to fit. I used a four and a half inch angle grinder with a zip cut disc. It was a 5-minute fix. I wasn't willing to cut the fascia on my new machine this seemed like the better option. Also would like to note the holes on this Mount are bigger than they need to be and I'm not sure why they are so big so for these two issues I gave it a three out of five stars.
Customer
2024-11-28 18:14:17
Front upper control arm bolt hole is a weak point, does not fit the 2022 RZR XP fascia very well. will not work with aftermarket brush guard. Just needed the winch plate threw out the front brace.
Ryan A.
2024-11-23 18:05:45
Missing (4) 8mm 1.25 x 25mm Hex head bolts. Charge full price and skip out on the hardware
Recommended Products
