Shopping Cart

Your cart is empty.

Your cart is empty.

RUGCEL WINCH 23' Cradle Winch Mounting Plate, Winch Mount Recovery Winches

5.0 (12) Write Review
Free shipping on orders over $29.99

$61.99

$ 28 .99 $28.99

In Stock
  • 【Heavy Duty Steel Construction】This winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan.
  • 【13,000 Large Carrying Capacity】Perfect for 8000 lb to 13000lb winches, heavy duty construction and is designed to mounting a self recovery winch to your vehicles.
  • 【Easy Installation】Package includes hitch pin and clip, standard winch mount pattern ensure the installation is more convenient. Everyone can use this winch mounting plate easily.
  • Standard 10" on center fairlead bolt pattern
  • 【Prevent Rust】Features a durable black powder coating, even put it outdoor or wet by rain for a long time, our winch mounting plate can be guaranteed not to rust easily and keep the original state.


Product Description

The universal winch mounting plate from RUGCEL Products has a mounting channel with three bolt holes pre-drilled so it can be custom mounted and is compatible with most winch brands. It is drilled with a standard 10" x 4-1/2" pattern, 15-3/4" pattern, and 19-3/4" pattern. Front of mount is also pre-drilled for standard 10" hawse or roller fairlead (holes are 10" on center and the mouth opening is 8-13/16" x 1-5/8". The fairlead opening is centered to the bolt pattern for a perfect alignment with the fairlead. This winch mounting plate is constructed using 1/5" thick, high-tensile strength steel plate. It is intended for use with winches that have capacities of 8,000 to 17,000 pounds, and features an epoxy grade finish which means it is less likely to experience rust and chipping compared to powder-coated finishes. The mount measures 22-7/8" x 7-1/8" x 3-7/8". Mounting hardware is included. RUGCEL is providing high quality, highly durable, electric winches,winch shackles,vehicle accessories and more to off-road motorists.


RUGCEL WINCH 23" Cradle Winch Mounting Plate

rugcel
About Rugcel winch

Rugcel Winch was established in 2002, has been dedicated to the development and production of numerous electric winches ,hydraulic winches,bumpers and 4*4 accessories etc for more than 16 years.we have strong research and develoment capability.now we have got 6 invention patents and 25 practical innovation and figure patents several patents are still under reviewing.

RUGCEL WINCH 23" Cradle Winch Mounting Plate

RUGCEL WINCH Cradle Winch Mounting Plate with constructed of 1/5" powder coated steel, the mounting plate ensures high quality and durable use.

Features:

  • 10" On Center Fairlead Bolt
  • Made of 1/5" Steel
  • Anti-Rust Black Powder Coat Finish
  • Perfect For 8000 lbs to 13000 lbs Winches

Winch Plate description

Rugcel

Technology

Black powdercoat finish for long lasting durability

Rugcel

Size

23" Cradle Winch Mounting Plate

Rugcel

Applicable models

Universal winch mounting plate


Dave Zehner
2025-08-19 17:56:22
I have the RUGCEL 13500 lb WINCH that I purchased for my trailer and was going to use a thick steel plate to mount it. The rope guide that comes with the winch does not actually mount to the winch, but this base is designed to mount the guide to. It is very sturdy and will securely hold the winch under heavy use and looks like it should have been included with the winch. It arrived much sooner than expected and is just what I was looking for. If I had seen the base earlier, I would have bought it then.
Roland Vellanoweth
2025-08-13 16:48:03
It is very sturdy but it also claimed to be able to mount to my jeep and it does not. Rather than drill new holes. I simply purchased another mounting plate from rough country.
Verified Customer
2025-08-03 14:15:10
Fit perfect
Darrell B
2025-08-02 15:24:34
As the headline states, this mount is predrilled for mounting the winch and also has predrilled holes for mounting the mount itself, so it was very easy to use. The winch's hawse fairlead also bolted right to the predrilled holes on the mount. The steel is adequate for the job and has a good coat of paint.You may not be able to use on vehicles other than the Jeep1987-2006 Wrangler, but it's useful in other situations such as my trailer.I admit I balked at the cost. That's the only thing I didn't like about the Regcel mount.
Colton S.
2025-07-24 10:20:02
Gonna have to make some modifications but it’s very heavy. Very happy with the quality of the product.
Tim Smart
2025-07-06 15:03:42
The Mounting Plate is rugged enough and fits my Jeep. In less than 6 months the paint started to peel. There is only one coat of paint and it separated from the metal in certain places. The metal should have been cleaned of all oil and then primed before being painted.The good thing for me is that I needed to replace my winch so I will remove the cheap paint job and do it right myself.
cody k.
2025-06-27 13:51:13
Worked prefect for a Rough country winch on the front of the trailer.
Tim nietupski
2025-06-02 17:30:29
My winch fit perfectly. Nice craftsmanship.
Chelsea/Brandon Richards
2025-05-16 11:40:22
This mount is 3/16" thick. The "power coat" is actually pretty thick also. I mounted this on my 98 chevy 1/2. This was the only pre Drilled Winch plate I could find that was more then 34" wide. Fair lead part is all good and clears my Canadian tire Winch.
Mike.C
2025-05-15 19:20:32
It works and does what it's saposse to. Showed up with a ripped box (not a big deal) but was missing nuts and bolts. Handles are also not built to fit properly. There's a massive gap between where it's saposse to mount. I'm not sure if your saposse to just tighten the bolts down to bend it in place or if there also spacers missing. (Also not the end of the world).The mount does work and feels Fairly sold. But it definitely could be better.
Sir Paul
2025-02-08 15:29:27
I was told to rewrite my review because it did not conform with the community. Judge for yourself.
andrew marcus
2024-11-13 17:14:42
Perfect unit especially for the price. Now I’m able to lift deer and moose without any issues.