Your cart is empty.
Your cart is empty.RVGUARD 20 Amp, 250 Volt, Plug, Grounding,NEMA 6-20P Replacement Plug Easy Assembly - Durable Nylon Construction
Tom D
2025-08-26 11:41:35
I just received these yesterday, and set to work replacing the ends on a couple of extension cords that I had previously put ends on a few years back.Unfortunately, the OTHER brand that I had purchased a few years back did NOT hold up well, and also were not that easy to install - based on how the screw attachments worked. Also, one end had rusted out a bit, and another had melted, so I decided to buy THIS brand instead, and try again.I was impressed by the quality of THIS brand - much sturdier, AND the way that you insert the wires into the holes and screw them down tight was a MUCH better design, and MUCH easier than the other brand.In fact, it so was so easy to install these ends, that I decided to build another 2 extension cords from scratch as well!I also REALLY liked the way that they designed the parts that grab the full wire - as it enters the body of these cord ends. When you easily line up the cord, and screw it down tight, the clamp has a really strong grip on the cord - which I'm sure will make the connections last much longer on my work sites!I am ready to order another set of these in the next few days!!
Constant Vigilance
2025-07-28 17:59:07
These 110v SJ cord male and female blade ends seem well made. I'll update my rating after I get a chance to use them. However they have a great price compared to others so that's a plus
Scott
2025-07-01 17:50:57
My cabin is wired for 240v but all load are 120v on either L1 or L2. All current loads are small enough to the powered by a small120v inverter generator. I used this to build a cable (vs multiple adaptors) from a 120v generator to a 240v panel with L1 and L2 phases connected in this plug (i.e. real 240v loads won't work)Good clamping of the wires at the blades. But the actual 12-3 cable is too small for back-shell strain relief.
Welles
2025-05-31 17:39:11
Actually a good product for the price. I needed two 15-amp 220vac horizontal spade males and one joining female for wiring in a septic tank pump monitor. I wanted the ability to easily bypass the monitor if it failed so I could keep the septic pump running. The male and female plugs are nice and I felt well built. BUT - in the middle of the wiring project, I found my plug was missing the two joining screws that hold the outer back case on. I checked the box and within the paperwork but no screws. Of course I wasn't going to stop and wait for a return / exchange. So I drilled out the plug so I could use larger screws I had on hand and finished the project. So as others have mentioned quality control is a little lacking. Check you plugs for all parts before you start your project. Overall though nice plugs.
Customer
2025-05-05 18:57:15
They are very good quality
Casey
2025-04-26 20:08:14
Got my cord up and running again have been using it for quite a while with no issues. Went on fairly easy. Quality seems decent for the price.
wayne whittington
2025-04-09 18:17:21
Good quality and arrived quickly
Walt
2025-03-03 20:41:48
Used for extension cord ends.The ones I used , fit, and worked well.
Michael Foster
2025-02-02 17:08:42
Complete sets male/female plugs. Works well replacing original plugs for my electric cords.
Whootie_Who
2025-01-25 17:27:35
The only thing that could make these better is that if they had a POSITIVE light when circuit is LIVE
Larry Hirtle
2025-01-21 18:43:51
not a lot to say as they are a simple thing good weather proofing only issue I had was screws were very soft souse caution when tightening them
Recommended Products
