Your cart is empty.
Your cart is empty.Product Description
With our wireless doorbell kit, easily add loud (or silent) alerts anywhere in seconds. Each door bell kit receiver covers 600 ft (183 m) with durable construction and the ability to add more door bell push buttons and receivers to expand your system. Have multiple entry points? Each doorbell kit receiver can play its own tone to indicate which door has a visitor.
Add a series of fun sounds with the ultimate student attention-getters. These doorbells help teachers command the noisiest of classes. Capture and keep kids’ attention for clean up, quiet time, line up, and lunch breaks.
Multiple tones, 4 volume levels, and a silent option that’s perfect for nurseries and other quiet areas make our wireless door push buttons the smart solution.
Use multiple wireless door bell receivers with unique tones to indicate which door bell push button has been pushed. Need more coverage? Easily add more receivers and wireless doorbells to add range.
Aviator32
2025-09-04 20:02:31
Works as it should. Simple to install and sounds great.
Angellman
2025-08-12 15:40:06
It works perfectly. Easy to install. Adjustable tone and volume. Looks good. A well made, ideal product.
༼ 㤠◕_◕ ༽㤠Blub Blub
2025-08-05 18:00:58
Update 11/7/21I contacted customer service via email to find out if it was possible to resync the doorbell and chime. Turns out there is a way! Doorbell is working just as good as day one.Customer service response to symc the button and chime:1. Reset the Plug in Receiver (Do this if you need to change ringtones, if your receiver is randomly chiming or if step #2 did not work)a) Please clear out all settings of your plug in receiver by pressing the Music Control button for 5 seconds or until you hear a "pairing alert chirp" and see a quick flash.b) Verify that your push button is not connected to the receiver by pressing the push button, the receiver should not chime.Once it is done, do the pairing operation:2. Pairing and Assigning/Changing Ringtonesa) Select desired ringtone by pressing Music Control button.b) Set Receiver into pairing mode by pressing the Volume and Music Control buttons on the receiver simultaneously. A chime and LED flashing will indicate the ready status.c) Quickly pair push button with the receiver by pressing the push button.d) Press again the push button to hear the tune you selected, which means that your operation is completed successfully.Original Post:I purchased this item back in Nov 2018. Initial setup was easy, i used the double stick tape. plug in the chime part, peel the tape, stick it to the button, press the button to the door. In my case the chime plugin part is right on the other side of the door, talking 3 ft away. That was pretty easy. For the first year or so it worked great. Then it started to not chime when the button was pressed. Sometimes it worked other times it wouldn't. Took repeated presses and it would chime. I replaced the battery and it worked a little bit better. Still would not always chime, but a quick double tap seemed to always work. Figured if someone needed me that badly they would press the button twice anyway.Fast forward a few months later, pressing the button would light up the button but no chime at all. No matter how much you press the button. The chime plugin receiver works fine, turning up the volume, changing the right tone all work. Pressing the button does nothing.For the price it's not a bad doorbell, but very unreliable. Might last a year, might last a month. There seems to be no way to resync the doorbell to the receiver so you are just out of luck when it stops working. I would not recommend this product to be reliable enough to alert you grandma is okay or for anything that requires any kind of level of reliability.
Felicia Daniels
2025-07-09 11:58:55
I purchased this doorbell as a replacement for the wired doorbell in my home. My home is older & I was having difficulty finding compatible doorbells. I chose this one due to price, style & how fast I could get it. The install of the doorbell outside was a bit annoying in that you have to punch out 2 holes but that is not an accurate description. I ended up having to use a drill bit to properly put holes for the screws in because it is plastic. I was afraid continuing efforts to pop a hole in plastic might just crack the plastic. But once I got the holes put in, the doorbell was easy to install. The chime was easy to install as you just plug it in. I would suggest that if you have limited plugs like me where the chime could be heard all over the house that you get the set with 2 chimes. I live in a townhouse & the ideal spot is where the CO2 detector is so I am unable to plug it in. It was easy to adjust volume & select the chime. I admit I chose the first pleasant chime as my dog barked at every one I tried so I did not listen to them all. I only gave it a 4/5 as I have not had it installed for very long & do not know how it will last over the long term.Update: The doorbell stopped working before the end of the year. I thought it was the battery. REplaced the battery. Still did not work. I can only guess that the doorbell part was not as waterproof as it suggested or else the construstion was poor. New score 1/5
Kenneth
2025-07-05 18:34:44
The doorbell alarm was a little smaller than I expected. This is a plus! The installation was very easy. I first connected the two sided tape to the doorbell push button. Once it was stuck to the outside of my house, I used the included screws to permanently fasten the button to the exterior wall. The siding on the front of my house by the door is wooden, so I didn't have to pre-drill holes and install the included drywall plugs. I was pleasantly impressed with the range of the wireless doorbell. I know many wireless products claim 500-1000 feet, however that range is only if you are in the middle of a flat desert with no walls. There are several walls between where I placed the bell and the button. The total feet for installation is (guessing) 25 feet. I have had zero issues with the wireless connection. The bell chimes every time. The only "con" I have about the doorbell is that it has way too many bell tones. Cycling through the tones is pretty annoying. However, if you unplug the unit or lose power it starts at bell #1 again. I'm using the first sound, so that works great for me. At the highest volume, the bell tone sounds a bit distorted as if the speaker can't handle it being that loud. I turned it down a bit and it is still plenty loud enough to be heard throughout the house. I installed the doorbell in the center of the house and on a lower level floor. I'm very impressed and I think I am going to purchase another button. It works great and saved me a ton of time trying to figure out the wiring of the previous wired system that is missing parts and wasn't functioning. Time will tell how long the battery lasts and how well the unit will function during a Michigan winter. So far, I'm very happy.
Wayne
2025-07-03 17:41:42
This product is an easy door bell solution. The sending unit (button) comes complete with a 12 volt battery. I was unaware of this at the time of my purchase and added batteries to my order.The sending unit t can be easily affixed by placing the 3M adhesive (included) to the back of the unit. I chose to secure the unit by screws (also included). To do this I had to drill holes in the back of the plastic. The locations are marked, but must be drilled. The manufacturer could improve the unit by either having the holes predrilled, or an easy snap-out plug installed.The receiving unit is simply plugged into a close plug receptacle and the type of chime and volume selected. This is easily done by pushing the appropriate buttons (on the side of the unit) up or down. In a matter of minutes the installation can be completed.My installation was beside a steel door. The receiving unit is approximately 8 feet from the sending unit. I have experienced no difficulties and the unit performs as expected.I cannot attest to how well this unit and battery strength can stand-up to a Canadian winter. As the batteries are easily available at low cost and replacement is a simple matter, I'm not overly concerned.Given the cost, quick delivery and performance of this product to-date, I would highly recommend this unit.
Vicki
2025-05-18 14:04:11
Considering this was very inexpensive, it works quite well. It's plugged in the downstairs hallway and the volume is loud enough that it can be easily heard upstairs. I really like the fact that you can set different sounds. I used the adhesive that came with the package and did not screw it into the outside door frame. So far it's sticking very well.
Zhi LI
2025-03-07 15:20:36
Â
Client Kindle
2025-02-18 14:04:04
Sonnette installée début septembre. Ne fonctionne déjà plus (ce n’est pas un problème de pile, la sonnette se déclenche aléatoirement et sonne jusqu’à ce qu’on la débranche)
lamagnere
2024-12-24 16:43:23
Le produit envoyé est muni d une fiche electrique de type US. Il est donc inutilisable en France.Il faut donc acheter un adaptateur us /fra pour l utiliser.
Recommended Products