Your cart is empty.
Your cart is empty.Richard Engstrom
2025-08-27 15:01:31
I was pleasantly surprised at how well it worked considering it was not a directly connected tach but rather turned a sensor over the coil wire. I configured the proper code for my engine, wrapped the sensor wire and it worked the first time and every time since then perfectly. My application is a stationary generator so the tach connection has been very reliable. I may buy another for my zero-turn mower and see how well it does with all the mower's motion and vibration.
Jonathan Hales
2025-08-10 18:09:03
Purchased this to fit up to a 2017 Polaris Outlaw 110 EFI (I know, ironic) and it's working great.Got the wire ran and separated / secured off from the frame and other electrical components, raveled around the IGN coil wire 6X and tied off at both ends of the ravel, programmed the device in a couple minutes and voila. Works like a charm.Engine tach comes alive within a second of firing up your engine, and displays a stable / accurate RPM signal. Couldn't ask for a better inexpensive option to get a functioning tach on something like this!
E. Michels
2025-07-25 11:09:16
i am older so understanding all the potential settings was confusing but after figuring it out, works very nicely, I can now run my tractor without worrying if I am running it to high
Paying Customer
2025-07-09 17:34:07
Title says it all. Don't plan on using this on a go kart unless you plan on turning your head 90 degrees to look at the guage. The cable is like 3 feet long. And exte sion coaxial induction cable almost costs more than the unit itself. Also, it shows green backlight. The backlight is only on momentarily while you're using the menu. It gives a fluctuating RPM between 850 and 1650 at idle. It's not even a rough estimate.
Chris Coblentz
2025-07-07 11:12:16
As described
FairHillian
2025-06-19 12:24:02
I was totally surprised by this little tachometer. It works fantastically and was very easy to mount. Even though I mounted it on a 3-cylinder two-stroke Yamaha outboard, I wound up using the setting for a one cylinder engine. At first confusing, this made sense to me because it mounts on a single spark plug lead. You have to have some idea of what RPM your engine should be idling/running in order to choose the proper setting. Has been working great since, and allowed me to tune for prop pitch and diameter.
CatDog
2025-05-27 10:06:58
Using this to set final rpm’s on rebuilt home generators and it works as it should. Easy to read display albeit it’s designed to view at a slight angle rather than straight on. Enclosed instructions are typical Chinese to English translation so be prepared to “read between the linesâ€.
proman
2025-05-13 13:49:47
This is a follow up review after using this product over a month! The inductance tester wire came out of the unit, it was clearly only cold soldered into the meter rendering it worthless, so I rturned it to amazon! Other than this one bad experience I have always purchased from amazon because they stand for a strong custommer satisfaction program!
Steve
2025-05-07 14:10:10
Funktioniert ohne Probleme
Client d'
2025-03-21 21:36:34
Fais ce qu'on lui demande.
Client d'
2025-02-03 12:15:25
Mauvaise qualité, les RPM sont complètement incorrectes et changent selon l'endroit où l'appareil est positionné et encore pire s'il est tenu à la main. Bon pour la poubelle. Je déconseille !!
Stig Voetmand
2025-01-25 19:51:37
Genau und gut lesbar.
Nathan EGGENSPIELER
2024-12-29 12:05:22
Très facile à installer
Recommended Products