Your cart is empty.
Your cart is empty.Siemens GFCI circuit breakers are UL Listed and CSA Certified as Class A devices. These circuit breakers offer the new Self-Test and Lockout feature as required by UL 943, enabling the GFCI to automatically and continuously test itself to ensure that it is working properly. If it is detected that the device has been compromised, the device trips itself and locks out the homeowner from resetting the device, reducing the possibility of the homeowner incorrectly assuming that the device was tripped to prevent a ground fault. Compatible with Siemens load centers rated to accept QPF type breakers. Note: A load neutral is not required on the circuit. However, the white line neutral (pigtail) must be connected to the panel neutral for the device to function.
S. Stout
2025-08-18 10:23:10
Loved that the new breaker got my EV charger back up and charging
Scott Ryan
2025-08-12 11:27:34
It was very hard to find a GFI 60a 240v breaker, and was so happy to find this one! Fits the breaker box correctly, and works good.
Martin Blitz
2025-07-24 18:13:41
I had a 60 amp breaker that kept tripping daily. Replaced with this. Works great and a great price.
punkybear
2025-06-23 13:01:33
Perfect for my Siemens panel. This breaker is an awesome replacement for the standard breakers in your electric box. It is standard width of a 2 pole breaker, however; it is longer on the side where the wires go into it. Making sure all the DIYers know that just in case they need to know specifically how or if it will fit correctly. Perfect breaker for a hot tub. That’s what we plan to use it for.
David R. Harloff
2025-05-01 16:23:40
Everything was fine. Needed to replace the breaker on our hot tub. Price was comparable to Home Depot.
Scott A. S.
2025-04-23 15:27:37
The only thing I dislike about the circuit breaker is the cost but you can say that about anything these days.
JT
2025-03-10 13:17:43
Used to replace a faulty/cheap 60A hot tub breaker that would trip every couple days. So far so good!
Brian
2025-02-20 13:12:09
I recently hooked up a 400 gallon, 8-seater spa (BeachComber 750, Balboa main board) that requires a 48A circuit (240V 3-wire) to this breaker. If you have an old GE panel like me, you probably won't find a 60A GFCI GE breaker anywhere. You also won't find an outdoor spa disconnect box rated for 60A with an isolated neutral bus bar at Lowe's or Home Depot. My final solution was to use this breaker in my GE panel and creatively connect and isolate the neutral wires inside a 60A AC disconnect box outside near the spa.This breaker will fit in GE panel. Yes, it does cover up the neutral bus bar (see picture) but it mounts just fine on the stab type connectors. I hope this helps!
James Cook
2025-02-18 18:12:24
Legit Siemens breaker, installed in my resi panel for a hot tub, worked perfect
Customer
2025-02-17 12:49:26
Good
Mathieu Nadeau
2025-02-06 13:00:11
L’annonce disait 60 A et le disjoncteur reçu nlest que de 40.
Joe
2025-01-27 14:24:52
I was installing a hot tub for a guy and the hot tub place sent out an external breaker box with the breaker. The panel was installed in the drywall so it would have been a pain to run a wire out then back into the drywall and have it look clean. The solution was a breaker in the panel but the stores want an arm and a leg for it. This was a much better price than anywhere that I checked for the same item. Thanks!
kinga rzepczyk
2025-01-12 13:02:33
Works perfect
Recommended Products
$94.00
$ 37 .99 $37.99
$129.94
$ 62 .99 $62.99