Your cart is empty.
Your cart is empty.Surge Protective Devices (SPDs) provide the best protection from both externally and internally generated surges when located as close to the building distribution system as possible. For cost and space reasons many buildings only include one SPD located at the main incoming load center and do not cascade SPDs throughout the building as recommended by IEEE. Siemens QSPD series of SPDs are economical and easy to install in most panels throughout a building so that whole facility protection can be obtained.
Henry Ramirez
2025-08-24 13:56:51
I wrote an earlier review saying this product did not work after I bought it and installed it. I was wrong. The product did work fine and I did not realize that until I bought another one and then installed it and still the light did not come on. Asking other people I found out that that light does not come on unless the device experiences a surge of power and then it does what it's designed to do, and that light will come on to inform you that it had experienced a surge. All in all the product is simple to install and it is a quick fix to add a search protector to a home.
Hassan Elzaghir
2025-08-15 13:52:43
I highly recommend this surge protection for Siemens panels. It's easy to install, durable, and effectively protects against power surges!
Customer
2025-08-05 17:24:21
good deal
paulswagelock
2025-07-01 18:26:31
High ratings for protection. Indicators are mechanical not electronic, but that is fine for me.
Kindle Customer
2025-06-16 17:15:00
This product is a good cost effective solution for a whole house surge suppressor. Very easy to intall, even easier than replacing a breaker. Even though my Siemens panel is about 35 years old, I had no issues. Fit like a glove.It's best to have this at the top of the panel. This way any surge will be shunted by the surge suppressor before it has a chance to run down the circuits. That did mean moving the right side breakers down two slots, but that wasn't difficult. Also best to have it on the same side as the neutral bus bar so you can make a direct connection to it with the pigtail (cut as short as practical), which was also on the right side of my Siemens load center. I'm a bit surprised that the pigtail is 16 AWG and not at least 14 AWG. But it is UL listed for this function, so that must be all that is needed.I rated at 4 stars only due to the product design. As it has mechanical flag indicators (they are not LEDs), one has to trust that as you have it plugged into the bus bar that it's working. Would be nice to have confirmation that it's powered up correctly. Of course you could pay more for the higher end product that has LEDs. Siemens does make quality products, so I'll trust that green flags means it's good.If you have electrical skills to safely change a breaker, you can install this product without any issues. I love the Siemens load center approach, just hook the breakers on the channel and snap them into place. Easy as can be.
Private Buyer
2025-04-29 20:15:41
Factory oem breakers.
Travis
2025-04-11 13:22:08
This Item Does Not Have Any lights or LEDs in it, so don't worry if it doesn't light up.It does Not Need any lights or LEDs in it.It is not a circuit breaker, and will not "trip" like a circuit breaker, and then can be reset.The indicator window is only that, a viewing window.If the windows are Green, then the device is working properly.If one or both of the windows are red, that means the device has faulted, and manually flipped the indicator color in the viewing windows.Plain and simple, if this device lights up then you have a major problem.Just trust me, I'm an Electrician and install these all the time.Also, there is No Way to test these unless you want to send a surge through your power meter over what the device is rated for.Go ahead and do that while you blow up everything in your house at the same time.Again it's a surge protective device SPD that operates according to voltage fluctuations, and Not a circuit breaker which operates due to the amount of amps being used.They are completely different things.
Haley R
2025-03-30 11:24:28
My brother needed this for his new subpanel. He mentioned that it was easy to install and only thing he had to do was just wiring the neutral wire.
J
2025-03-20 17:18:49
Product was delayed in shipping. The company gave me a partial refund. Very quick response. Happy buyer. It fit perfectly as well.
Oliver
2025-03-19 10:13:47
Fait sont travail
Glen MacNeil
2025-01-30 17:36:47
Ordered this unit through Amazon. The good news is the unit was delivered a day earlier than expected. The bad news is it didn’t work. It was a waste of my time, energy and money. If I receive a full refund plus shipping I’ll be happy I didn’t lose money. It was still a waste of my time and energy.
Recommended Products