Your cart is empty.
Your cart is empty.Product Description
-
-
Low Peel Force
-
-
-
Ryan McCully
2025-09-04 11:25:35
Prints great, cleans great, looks great, very durable.I was really impressed with how it *just* worked.I would give this 6 stars for "easy to clean" if I could. This is a great alternative to "water-washable" resin.Cleaned super well with only 15% Ethanol in water using only manual swishing, I didn't have to do any extra steps to make sure it was clean.It post cured *very* quickly. No smell or tacky-ness after about 30 seconds.It is very stiff (only a little flex) but is super strong rather than being brittle. I may even use this for mechanical parts that need to be rigid.Very low viscosity makes it run like water, which makes draining and cleaning way easier.The smell was very low, comparable to their "Fast" resin.The transparent-ness was great. Frosted look comes from the pixels on the screen and is solved by a clear coat. It had very little yellowing, which is excellent for a resin (additional UV exposure may cause more yellowing)Spray paint Primer adhered great, no issues.See pictures for the detail/quality of the print.Printed on Elegoo Mars, 8s exposure.
K. Skelton
2025-08-30 10:48:50
[EDIT Aug 24, 2020I have several prints from around the time of my initial review (July 8). For this test I printed 3 models with each resin mix: 100% Simple, Simple mixed with 30% Blu and mixed with 50% Blu. All were washed in 99% isopropyl alcohol, 20% iso and 35% vodka then rinsed with tap water and cured with a UV lamp. To date I've had zero issues with "melting" as others have reported. I used the same settings as I do for Blu (which come from the Anycubic Photon Google Sheet that is available in a number of enthusiasts groups).The 100% Simple is about as brittle as other standard resins, subjectively. The 50% mix was a little sticky after the wash/rinse for non-99% iso washes, and I didn't notice a significant difference in subjective toughness compared with the 30% mix. I did notice a marked increase in smell as I increased the quantity of Blu. ]I am a fan of the Siraya Blu and when I heard about Simple I had to find out if the low odor and clean up with 15% alcohol claims were true. I was too excited to try this and loaded up a model that has settings for Blu without really thinking about it, and Simple printed beautifully. I also found that the smell was hardly noticeable.I put the prints in my ultrasonic cleaner with an approx 20% IPA solution and cleaned them for three minutes. I was very pleased that there wasn't any obvious resin on the surface. Blu, on the other hand frequently felt gummy despite being cleaned with 99% IPA. While removing the supports they felt stiffer and more brittle than with Blu, but this resin isn't claiming to be tough.I'm going to try mixing this with Blu to see if it gains flexibility while retaining its low viscosity and easy clean up.
Devin H.
2025-08-22 11:16:33
Good stuff. Effective and precise prints. Only defects in prints are due to cheap photon zero printer quality. Shake, pour, print, clean (alcohol only!), Cure, done. It's that easy.Once cleaned* and cured it was slightly tacky and flexible. Withstood a drop from about 4 feet. Overall very happy with the quality and price.*Do not clean with water. Move from printer to alcohol solution immediately. Cleaned in 80% alcohol solution without problems.
Liam Craig
2025-07-26 17:49:44
On my elegoo mars, this Printed great with the recommended times from Siraya's web site. Didn't appear too temperature sensitive (the ambient temp was 65F). I printed three 32mm scale miniatures on the plate, and the figures came out fine, and I was able to wash them in a mix of 20% IPA (91% concentration) and 80% water, and they came out just as clean as using IPA only.After curing, they looked "frosted", but that's to be expected, no surprise or disappointment there. I believe you can get rid of that with just a quick spray of a clear coating (I'll have to try that to see)Durability-wise, the prints had no flexibility at all, but are very tough. I was able to drop the miniatures with no cracking of the major parts of the body, though small parts, like swords and spears, snapped right off since there was no flex.I could easily see replacing most of my other resins with this for day to day printing of parts that don't need to be flexible. The quick printing, and easy low-alcohol cleanup are a huge bonus. Going to try it in my Sonic Mini soon, since print times on that are 30-50% faster than the Mars or similar printers.
brianm
2025-07-10 18:34:46
When you have a failed print on a large tray, it takes forever to filter and pour it back into the bottle. This stuff flows quicker than any other, so it will take you 5x less to do this. Also it's very slick. When you do 3d printing with this you can just print solid as the uv curing light will bounce around and prevent uncured resin. my only complaint is that it's called "simple" and doesn't let you know with certainty that it's water washable so everyone can find it. Literally the best clear resin.
Customer
2025-06-06 11:54:03
Haven't had any issues with it and it seems to print well. I use an elegoo Saturn (and at one point the original Mars) and I haven't had any issues with it. printed many minis and dice masters with it. good product. It does have a resin smell though I'm unsure if there is any 3d printer resin that doesn't though.
Luis
2025-05-27 10:36:18
Siraya tech never fail to me,.. I use other brands before but that one is really good.!! Clean results and the cure is excellent!.. I’ll recommend,.. make sure when ad resin specifications, download the community specs results,..( users of Lychi Slicer) that give you the best exposure time for your printer.
O
2025-05-21 12:35:32
Incredible product. Had a few issues with settings on my printer but Siraya Tech Support was able to sort me out. 10/10 customer service.
Alexander
2025-05-19 11:51:36
Each resin brand, line, and even bottle behaves differently. I found this one is more fragile when curing because it actually prints with better accuracy than another brand of water-washable that I tried - so I found problems in my STL designs, fixed them, and this resin handles it better than ever.The advice given for my printer on exposure times by the brand is way off, so you'll need to fine tune.It seems to smell slightly less and react to the heat less with less fumes than another brand I tried.
Alberto
2025-04-11 19:29:07
Se supone que se lava al agua, no es asi. Al ver que no se lava al agua, he intentado hacer lo que recomienda el fabricante, usar una mezcla de ethanol+agua, dando ningun buen resultado. Al final me decidà por lavar solo con ethanol, tampoco dio resultado. Y no, no es falta de experiencia, llevo mas de 5 años usando impresoras de resina y con esta en concreto estoy teniendo recuerdos de mis primeros dias en este "hobby". Hay otras marcas que literalmente, bajo el grifo con agua tibia, se limpian y solo quedarÃa dejarlas secar tranquilamente encima de un paño seco. No la volverÃa a comprar, ni regalada vamos.
KLEIN
2025-04-09 20:46:31
Très content de cette résine, utilisée avec Elegoo Mars 4. Un nettoyage complémentaire à l'alcool est à prévoir ....
William Service
2025-02-18 15:24:17
Worked well with my creality Halot Mage 8k, was easy to set up the printer with this resin and the models were very strong once cured.
Recommended Products