Your cart is empty.
Your cart is empty.Product Description
Usage Condition
Recommended usage temperature: 20-25℃.
Shake up the bottle before use and avoid direct sunlight and dust. Wear a mask and gloves to avoid direct skin contact and maintain indoor ventilation.
Once the model is complete, please wash it with ethanol alcohol for at least 30 seconds or with dish wash liquid solution.
Attention
When printing large model, please increase the build plate contact of the model or lower the infill density to avoid wrapping.
Wash with plenty of water immediately if got accidently skin contact. If feel discomfort after you got skin contact, please see a doctor ASAP.
Do not drink it and keep it sealed and out of the reach of children
Anycubic Plant-based Resins
Ultralow odor without nasty chemicals!
No BPA, no harmful chemicals.
Complied with EN 71-3:2013 safety stand.ard
Optimized curing time for Anycubic Photon, offering better printing quality.
Sensitive to 365nm~405nm UV light. Compatible with most LCD/DLP 3D printers.
Storage
Store in a dry and dust-free place under 15℃-35℃.
Keep it sealed and keep it away from sunlight.
Brand Manufacturing:
- For freedom to make through 3D printing technology
- ANYCUBIC has gathered a professional 3D R&D team
- Committed to creating a high-quality desktop 3D printer
- Was rated as the "Most Popular 3D Printer Brand"
- 3D technology brings more possibilities to life
High precision:
Low shrinkage, dimensional stability when printing.The model has high precision and clear details.
Use ANYCUBIC Resin to Start Your Creative Model
Rigid & Toughness:
Appropriate toughness.ANYCUBIC UV resins have good combination of hardness and toughness
Brings easy removal of model and fine printing details
Stunning Colors:
Specifically designed for LCD light source to achieve better printing quality.
Very pure and amazing color effects, presenting you a more perfect printed model.
Wide Applications
--ANYCUBIC resin is compatible with LCD 3D printers that use ultraviolet light sources to cure models.
--Wide range of applications from micro board games to industrial parts, such as professional prototyping, science exhibition projects, early exposure projects, middle school classrooms, etc.
Eric Gutierrez
2025-08-28 14:40:26
I have used this resin before and this was no different. I like the low odor and there was no difference between the last bottle and this one when printing. I just finished printing several upgrades for Robot Quest Arena and they came out good.
JC
2025-06-27 18:30:35
New to the party. Started with washable Resin from another company, with my first print which was the two Rooks on the Mars 2 Pro. Despite the great turnout, the smell was way too much to print a second object.Once it was exposed to the air, it wouldn't die out until the next day. Even with a big open window, fan and giant-a$$ air purifier. I stopped using it and purchased a few of the Anycubic EC resins. Started with transparent green, and was shocked in not only the great results, but the odor was even lower than I expected. You have to stick your face next an exposed vat to smell anything. Opened up the pink the next day, and again, great results, though I have to say, the odor on this one was a bit stronger, but still nothing like that water washable. Finally, I started using the EC White tonight, and wow, even less odor than the translucent green. In fact, of all the resins so far, this has the least smell. Printed up a Michelangelo sculpture, and it turns out kind of a bone whit and looks like it was purchased at a museum gift shop. I mean, it looks like porcelain! Can't wait to try the clear next, but hope Anycubic brings out more colors!
JLEFIK2022
2025-06-18 13:44:29
As a first time owner of a resin printer (Anycubic Photon Mono 4K), I am happy to say it was a painless transition from FDM printing and having a good resin, such as this, helps. I don't have experience with other resins, but this was recommended to me by a coworker who said he uses it for all his stuff he prints, so it's what I went with. I've only done about 3 prints as of writing this review, which I think should be pretty good for figuring out whether or not I will like it, and have to say, I'm completely amazed by the quality. Maybe it's just because all I've known is printing with filament and the difference is night and day.Either way, it prints good, and the printer itself did a good job. The pics I have provided are printed with this resin, but don't represent the true color of the resin since I've applied a light coat of primer since I plan on painting it. The actual color is a shade lighter than the primer.The print quality is still amazing with this resin and clean and cure was a snap with the Anycubic wash and cure station. 10 minute wash, 5 minute cure and print is great.
RedArmyLLC
2025-06-07 18:31:25
Advertised arls low odor but smells more than non eco
Steve in Monterey
2025-05-26 12:46:47
I was about to get kicked out of the house due to the smell of typical 3D printing resin. This one is not odorless, but the smell is only a small fraction of the other resins. It also isn't quite so sticky when you get some on a tool handle or your hands (yes, I wear gloves, but I'm not perfect).For the Mars 2 Pro printer I did some tests and found that 3.5 second exposures (45 seconds for the first layers) worked well. Your preferences may vary depending on what you make, but that would be a good starting point. For other printers the numbers could be very different, because each has different UV intensity.I have been printing airfoil cross sections, 113 mm chord by 145 mm wide. The pieces are hollow, with a wall thin enough that it flexes in your fingers. You can seem some flaws in the photo, but most or all are because the FEP film in the machine has damage from previous projects. Once I replace that, results should be excellent. I had a 500 g bottle, and just ordered another 1 kg.
Hamzah
2025-05-25 16:49:31
Toxic? Probably. But the odor is subtly like mushrooms, and you only smell it when the hood is off. If you like mushrooms and don’t want to ruin your love for eating them, then skip out on it. Otherwise it’s good.
Tyler Eon
2025-04-15 11:17:02
I've tried a handful of low-odor resins, trying to find the least "dangerous" one to work with, and I think this may be the closest I've come without breaking the bank. I also just have very sensitive sense of smell so anything that I can use to help reduce the overwhelm of that toxic smell from working with resin is a huge win for me. The prints are still great quality, the sheer strength isn't as good as top-of-the-line resin but it's the best among the non-toxic/low-odor options I've tried, and therefore the value proposition of this resin is solid, in my opinion. I'm now using this 99% of the time and I love it.
Jayce and Sydney
2025-04-11 18:46:48
I use this for all of my miniatures that I 3d print. Good detail, each bottle has a little different perfect Cure time, so want to do a test, (I prefer Puck the Adventurers Tester). But if cure time is right and clean vat Prints turn out awesome time and time again. Smells, a little but not bad. Color is Grey but I always prime and paint my miniatures anyway. Cheaper then most price wise and looks good and couldn't tell.
Daniel Esquer
2025-04-10 21:35:53
bajo olorimpresion de buena calidadno muy fragiles en comparacion a otras recinas de otra marca y mismo precio
Christian Carmona
2025-03-11 14:44:26
Está resina es fácil de lavar, casi no huele, configuración simple y rápida para la impresión.
CDM
2024-12-18 17:19:58
Love the resin, prints great quality and as advertised is super low odor.My new go to resin for printing mini’s.
Dmitry
2024-12-06 10:11:59
Buena goma para impresión 3D.
Max
2024-11-12 18:48:19
I've printed 3kgs of this stuff, it's great.However it's definitely NOT "Odorless" the smell is there and noticeable. I print in my kitchen and the smell spreads throughout the apartment.Other than that it's a great resin for miniatures, it's relative bendable so the minis don't shatter or snap easily, that said, they'll still shatter if you drop them on hard surfaces if cured.I recently tested uncured models instead (washed thoroughly of course ) and they works great, super tough and shatterproof even when dropped from table. My hopes are that the primer will seal the resin so it doesn't leak out over time.I'd give the resin 5/5 star if it wasn't for the smell..
Recommended Products