Shopping Cart

Your cart is empty.

Your cart is empty.

SNS Air Compressor Pressure Regulator With Bracket and Gauge Female Thread 1/4 NPT 0-150 PSI Adjustable AR2000-N02

Free shipping on orders over $29.99

$22.03

$ 10 .99 $10.99

In Stock

1.Color:Ar


2.:2000-n02


About this item

  • Thread: 1/4 NPT
  • Rated Flow: 19.4 SCFM(550 L/min)
  • Temperature Range: 5~60℃(41-140℉)
  • Aluminum Alloy Material
  • When regulating pressure, pull up the rotary knob and rotate clockwise to increase the pressure and rotate anticlockwise to decrease the pressure



Product Description

SNS Pneumatic AR2000-N02A Regulator
Accurate Pressure Regulation
The detailed information of AR regulator
The pressure gauge of AR regulator
The order code and specification of AR regulator
The dimension of AR regulator
Product packaging

Peter Cunningham
2025-08-27 17:41:20
I'm impressed with the SNS AR4000-N04 air pressure regulator! It's a great choice for anyone who needs accurate control over air pressure in their projects. Here's what I particularly liked:Easy Adjustment: Setting the desired pressure is a breeze. Just pull up the knob and turn - simple! No complicated instructions or finicky controls.Precise Regulation: This regulator delivers consistent and precise pressure within the 0-150 PSI range. No more guessing or wasted time with imprecise adjustments.Built to Last: The aluminum alloy body feels solid and durable, giving confidence it will withstand regular use in my workshop.Ready to Use: The included bracket and gauge make setup a snap. Everything you need for installation is right in the box.Great Value: This regulator offers excellent performance at a competitive price. It's a smart investment for any workshop or industrial application.Overall, the SNS AR4000-N04 is a dependable air pressure regulator that's easy to use and built to last. Highly recommended!
Randy
2025-08-16 12:10:40
Works great to regulate my air for my nail gun when building bee boxes. Good design that allows for easy mounting.
DA HERBSTER
2025-08-05 14:04:40
works good for me
Woodsman
2025-07-21 17:49:42
Worked just fine for me. Some reviews stated a problem with which side was the inlet side, I noticed on one of the photos there was a small arrow in the casting. The one I received had the same arrow and that's what I used for the inlet side. Worked great and easy to set the pressure. Seems well made and packaged very well.
Mark D.
2025-07-18 18:35:22
Good purchase. I have this attached to my spray gun and it works great.
Ken B
2025-07-01 13:35:24
So far this regulator is great. We had a cheap HF one that leaked all the time this one is easy to use and so far no leaks.
prongATO
2025-06-05 17:24:17
Do NOT buy the piggyback unless you want a leak within a week. My five star review is ONLY for the regulator. I tried the piggybacks and they all developed a leak where valve is installed in the bottom of the bowl in less than a week. 0 stars for the piggyback.I tried some cheaper piggybacks/regulators and the gauges are trash, you have to tap them to get the current air pressure, not on this one! This one is very responsive whenever you make any adjustments. I am currently installing one of these or this with the added filter/moisture trap (for only $8.00 more!) at every wall manifold/drop in my garage. (I am leaving the drop on the ceiling unregulated) if I need to use any pneumatic staplers, nailers or blow guns I have the ability to adjust the air pressure to perfectly suit the tool I am using at whichever drop I am at. I used some T-nuts I printed on my 3D printer to mount the regulator to the Gladiator wall panel and used various brass hardware to route the air from the manifold to the regulator for a rock-solid, no-leak, regulated compressed air hookup. The output has a 90 degree elbow and a Milton 5 in 1 1/4” NPT quick coupler.
Christopher E.
2025-05-06 18:27:45
The regulator seems to work fairly well and was easy to install. The pressure gauge included but not attached will not work on this regulator without substantial leaking. When threading the gauge on to the 1/4" port on the front of the regulator, the housing of the gauge hits the regulator body before the thread can be made tight enough to not leak. A Gauge with a longer thread is required.
J.M.
2025-04-25 13:24:11
Good build quality
MR R CHANEY
2025-03-21 13:05:09
Works as it should.
David
2025-03-13 15:29:30
Ich nutze den Regulator für mein Wolverine Inferno Gen2 HPA System und die refreshrate ist sehr gut und ich nutze eine normale Flasche mit 850Psi Ausgang und 1/8 npt Adaptern. Bin sehr zufrieden.
Burt
2025-01-31 13:59:04
Fait la job a peu cout
FTM
2024-12-31 12:03:34
I was impressed at the quality and workmanship of this air regulator. It came in a very nice box with pressure gauge and mount separate. Very easy to install in my application. No leaks. Gauge is easy to read. Would definitely buy again.
Recommended Products

$54.68

$ 25 .99 $25.99

4.4
Select Option

$53.46

$ 26 .99 $26.99

4.6
Select Option

$180.02

$ 78 .99 $78.99

4.9
Select Option

$45.99

$ 24 .99 $24.99

4.8
Select Option

$71.29

$ 28 .99 $28.99

4.8
Select Option