Your cart is empty.
Your cart is empty.Product Description
Solar Grid Tie Micro Inverter Solar Micro Inverter 1200w
Description
- An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances.
- This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you.
- This IP65 waterproof inverter has a wide range of functions.
- This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas.
Specification
- Gross Weight: 4.08kg/8.99lbs
- Net Weight: 2.88kg/6.35lbs
- Product Size: 21*37.4*4cm/8.27*14.72*1.57inch
- Package Size: 47.5*34*11.5cm/18.7*13.39*4.53inch
- Package Included
- 1* Micro Inverter
- 1* Power Cord
- 1* English Manual
- Other Accessories for Installation
Grid Tie Solar Inverter
Notes
- Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation.
- When the input load is with solar panels, it is important that the VOC voltage is between 30-48V.
- We recommend that the solar panel is configured for 20% more power than the power of the product.
- For example, if the product is 600W, the total power of the solar panels should be between 700-750W.
- When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries.
- Please note that the positive and negative polarity should not be reversed when connecting the product.
- The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W.
- The input and output voltage of the configuration is within the normal operating voltage range of the product in order
- for the product to work properly and achieve grid-connected power generation.
microinverters for solar panels
Notes
- Please install the inverter correctly according to the instructions.
- If you have any questions, please contact the relevant personnel.
- Please don't dismantle the machine. Only qualified maintenance personnel can repair the inverter.
- Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter
- and remove the surrounding inflammable and explosives.
- When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock.
Micro Inverters for Solar Panels
How to Use
- 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine.
- 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter.
- 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug.
- 4: Connect the AC output cable to the AC main cable.
- 5: Repeat steps 1 to 3 to install and connect all inverters.
- 6: Connect the AC main cable to the public.
Maximum Input Operating Current: 54.4A
Peak Power Output: 1200watt
Rated Output Power: 1150watt
Rated Output Current: 9.58A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99％
Max Unit Per Branch Circut: 3pcs(Single-phase)
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
- Communication Mode: Power Line Carrier
- Power Transmission Mode: Reverse Transmission, Load Priority
- Waterproof Rating: IP65
Specification
Model: WVC-1200W
Color: Silver
Material: Aluminium Alloy
Power: 1200W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50VDC
Maximum DC Short Circuit Current: 80A
- Night Time Power Loss: <1W
- Total Flow Distortion: <5%
- Ambient Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
- Cooling Method: Self-cooling
aerodyn
2025-06-20 18:07:58
I am very familiar with grid tie inverters - I have 11 of them from 2 different manufacturers. I bought this one to replace 3 500w inverters. Each of those inverters produce about 225 watts, so this inverter should easily handle the wattage. This inverter has 4 input terminals rated at 300 watts each, that's why they call it 1200w inverter. When I connected the first 225 watts to it through the top right terminal, the monitor showed 161w. I connected the second 225 watts to the top left terminal and the monitor showed a total of 223 watts for the 2 225w inputs. I didn't believe it so I checked the output with a watt meter. It agreed with the screen monitor. Then I connected the 3rd 225w input to the right bottom input and the monitor still showed only 223w. When I disconnected the top right 225w line, the monitor showed the wattage go up to 320 watts. Obviously this inverter doesn't work as advertised. Very poor.
Knotty Bill
2025-01-10 09:46:55
As soon as mounted and Panels connected, it started producing power. IMPORTANT! Get a water proof box for the power production meter. It has to be protected from rain.
Recommended Products