Your cart is empty.
Your cart is empty.J. Campbell
2025-08-27 17:52:10
These are exactly what I was looking for! I recently ordered a pair of Klipsch speakers for my new set up and these things are heavy! I’d say they each weigh about 35lbs easily. Oddly enough the only type of padding that come with the speakers are these tiny little rubber “feet†that are no more than a quarter inch square. It seems a bit silly to me and I was proven right when the sound dampening was non existent with these silly pads.My search first led me to these large foam pads that are of all sizes and sit underneath the speaker. Although I can see these being extremely effective at isolating vibrations from the speakers to the surface they look hideous. They are large and bulky and I couldn’t find a single product that would fit the Klipsch bottoms exactly. True, I could have ordered large and attempted to cut them down to size but I couldn’t see that resulting in a clean cut and would look awful in the end.This led me to isolating rubber feet and I ultimately settled on these because they looked extremely chunky. Turns out I was right. They are very durable and thick and chunky and they need to be as they sit under some seriously heavy speakers now. They’re not squishy but chunky; that’s the best word for them. The nice thing is they don’t look large or awkward once installed on the base of the speakers. As I took them from their packaging I started to worry that they’d be so big they’d look a little silly. When I showed them to my wife after installed she asked me what she was looking at; what was I showing her? Ha! Perfect! They blend right in! They look like they should have come with the speakers themselves! That’s exactly what I wanted and I couldn’t be more pleased with how they look.Not only do they look great they work! They truly keep vibrations isolated to the surrounding air and stop most vibrations from being transferred to the table surface they sit on. This, for me, is a huge issue as I’m restricted in my setup to having the speakers on the exact surface where my turntable sits. This is not ideal but I am very limited in my room’s set up and am forced to put them on the same surface. These feet have done a great job at isolating vibrations.I truly couldn’t be more pleased with these simple rubber feet. They seem like such an insignificant thing but they make such a difference. They look good, they work, and they’re such a cheap addition to any set up that I can’t recommend these more highly to you!
Joey
2025-08-21 14:54:25
I glued these to the feet of my under desk treadmill and they are heavy duty but squishy enough to dampen the noise for my downstairs neighbors. Before I had been using a foam pad but that was a little annoying to set up every time. If they can isolate a treadmill these will do great for a heavy set of speakers.
Tim
2025-07-30 15:22:23
I added these silicone/rubber feet to a 5-drive NAS to minimize vibration & sound to an Ikea bookshelf. Happy with them.
Robert Philp
2025-07-29 16:51:33
effectively blocks vibration. I bit more pricey than I think a hemisphere of silicone rubber ought to be, but it was the best price I could find.
Alan
2025-06-22 19:18:59
Does the job at a very reasonable price.
Prashant Agarwal
2025-06-19 13:10:40
I bought these pads for my woofer speaker. I was looking for something that is low profile, raises the speaker 2-3 inch from the floor and should be able to absorb the vibration. This product fits the bill. See the pictures (it sits 2.5 inch from the floor - just enough height which I needed). Also it is almost invisible as I have installed it 3 inches from each corner. The adhesive is 3M which is premium. Once you install it, it is not coming off easily. Nice purchase, I recommend this product wholeheartedly.
Chad
2025-06-11 15:06:16
Put these on a pair of klipsch the fives due to getting feedback through a record player. These paired with svs feet for my sub, and isolator pads for record player and volume wide open i get no feedback through the record player anymroe. Prior, i could not turn up past 30% or got a significant amount of feedback/vibration through the record player, a audio technica. The feet on it are not the greatest considering the cost. But these work exactly as i needed. Recommend!
Irma T
2025-06-06 12:01:51
I used these to eliminate vibrations from my bookshelf speaker to the audio stand. They are not too big and not too small. Great price too!
Shuihu
2025-05-24 13:34:24
Ordered 8 for Wharfedale Diamond 12.3 floor speakers to install underneath spike pads that came with speakers whose foam padding was compressed to nearly nothing after only one year. I cut off the tips (about 1/5 of the total dome) due to instability of the dome shape (mind you, this applies to my project only), attached them to the spike pads and set the speakers on them. Perfect! Very satisfied! These are made of dense no-skid rubber with a very good isolation property. Can only recommend. Thank you!
kiwicc
2025-04-09 18:39:07
Son unas cositas pequeñitas y hermosas, compré las más pequeñas para unos monitores adam t5v y hacen su trabajo, quizá no al nivel de unas almohadillas profesionales pero es esto o gastar más.
Konstantin
2025-03-16 16:27:20
They do the job , but some vibrations remain
Customer
2025-02-26 17:18:40
Nice quality bumpers. Not cheap tho.
majdalani Alain
2025-02-20 15:36:14
Really nice quality product. It is small enough to be hidden under the speakers.
Recommended Products