Your cart is empty.
Your cart is empty.Product Description
Customer
2025-08-30 10:21:39
Easy to assemble, works well, and I love the fact that it comes with the right hardware to mount the engine, and the hardware has a place to be stored when an engine is not in the stand! This stand is holding my BB Chevy without any issues, even with the exhaust manifolds still on the engine.Overall, a great value!
Chris Davidson
2025-06-03 09:37:47
Speedway Motors apologized for the unfortunate incident and promptly shipped another cradle in return. At the end of the day, I was pleased with the quality of parts and customer services from Speedway Motors.
Thomas Garner
2025-05-22 13:24:12
I had to loosen one side of this engine mount and whack it with a dead blow hammer to install the block front side engine mount properly. Then everything fit correctly. Its nice that they provide hardware, but the bolts for the cross member seemed a little to small in diameter, so I drilled a little larger and installed grade 8 nuts, bolts and washer.Further if your installing a complete engine on this stand I would recommend American made grade 8 bolts. This stand itself is quite sturdy, so why jeopardies your engine with unknown quality nuts and bolts?
that-guy-35
2025-04-21 20:15:42
It fits my small block chevy 350s and 400s that I have.
Eddie Campbell
2025-03-29 11:22:57
Great product at a good Price
Havoc Man
2025-03-22 17:54:03
Got this rolling engine cradle for a 1996 454 Chevy. Fits perfectly as long as you assemble it on the engine. Don't build the thing on the garage floor and expect an engine to drop right into it. Put the thing on the engine, all bolts kinda loose. Once you have both sides on the engine, put the cross brace in position. Then just go around and snug everything up ... SHAZAM!! ....all done, fits perfect!The only drawback is, stuff like this is waayyyyy over priced.
Daniel Sims
2025-03-06 14:30:20
Â
Blackcloud
2025-02-17 11:44:01
I am very happy with my purchase. I will be able to mount both my small block and big block Chevy engines. I will also be able to move the engine blocks out of the way when it is necessary.
Robert Draper
2025-02-06 17:50:51
Thank you for this stand will come in handy when I get to install my chevy engine.
Arch
2025-02-01 17:44:32
Actually a really nice stand. I installed larger 5/16†bolts and nuts (4 total) on the cross brace as the factory bolts seemed a little light. required a little drilling the holes oversized, but very little. I think factory bolts were 1/4†, the factory holes were oversized for 1/4â€, but not quite 5/16â€. highly recommended mod imo. lots of metal to do this mod, btw. otherwise, nice paint job, engine bolted right in, no alignment issues. Would buy another.would be nice to see stands for other engines, 331/354/392 hemi’s for example
Recommended Products