Your cart is empty.
Your cart is empty.Product Description
Karim
2025-09-01 14:42:12
works perfect
Wayne
2025-08-10 15:43:15
I am so happy that I found this. It makes a strong joint, much stronger than a biscuit jointer. If you want a strong fast joint, use this. For the cost it is great.
Ed Tisoncik
2025-08-03 13:10:27
Faceplate was not straight so alignment of dowels was off.
Luis Arias Acuña
2025-04-22 15:18:25
Me gusta más que la galletadora (biscuit) en unión de marcos. Para tablas es similar.
RSinAZ
2025-04-20 15:07:24
This dowel jointer works very much like a biscuit jointer and even a bit like a Domino jointer. However, the one thing that's not possible with dowels is being able to adjust the fit of the joint during glue-ups. Therefore, you have to be extremely accurate with your markings and extremely accurate aligning the tool to your markings when cutting the dowel holes.I wanted to test the dust collection but did not have an adapter for my shop vac to adapt to the 1 1/2" wide dust collection connector on the tool. I'm glad that there's dust collection capabilities but the dust collection is from the bottom of the tool - not from the side. So, the workpiece will have to be clamped at the edge of a workbench to keep the tool-fence and dust collection from interfering with the cut. The dust collection connector is very short - only 1/2" (see photo). So, it will be difficult to keep a dust collection hose attached to the tool without it falling off. It would have to be a very tight fit.It is very easy to change the depth of the cut and the depth to the center of the workpiece. Since this cuts two dowel holes at once, the accuracy will be good for aligning the joining workpiece so no problem there. The issue would be getting a box or frame completely square. It would all depend on how accurately you marked the workpiece and how accurately you held the tool during the cut. If you have jobs where being precisely square is not that big of an issue, this tool gives you an economical option for joinery.
D Schmertz
2025-03-24 15:13:48
Works well, I did not have accuracy issues with this, it has a quite chunky steel plate, if you use that it's quite reproducible. Appropriate quality for the price.
Clayton
2025-02-24 14:24:10
It is simple to use, and seems to have plenty of power. Far cheaper than other brands I've looked at, and still does a good job
ChiViewer
2025-02-20 13:41:49
I was able to figure out this dowel joiner fairly easily out of the box just by observing the knobs and guides. And when I read the instructions my assumptions were confirmed. I really like the rack and pinion height adjustment for reliable fine tuning. I also like that there are preset stops for common angle adjustments. And hiding the hex key in the handle is a nice touch so that it always remains with the tool and doesn't get lost.When using, it's surprisingly loud considering it's just two drill bits. But I think having two of them means gears inside that are likely the cause of the loudness. It's ok though because I wear hearing protection anyway.I did a test fit on two boards and found the holes to be a perfect fit with the dowels. I used the center line to align with my pencil marks on both boards and somehow they were misaligned by about a millimeter. I'll definitely do several tests before using on a real project. And once I find the true center I'll use a marker or scribe to add a line. Given the price of the tool I am a little surprised that the alignment isn't perfect.
Mata
2025-02-03 14:29:13
Much more accurate than I thought. Do use a square to get a true 90 though when setting it up. My only annoyance is 8mm dowels don t fit snuggly enough in holes. I might give a go with 3/8 dowells event though that might be way too big. My workaround is flattening a bit the dowells for now but I hope to find some that fit well. Because apart from that it s great
Customer
2025-02-02 20:21:17
the best part is the freedom you get without a cord, bluddy brilliant. I am a bit disappointed, in the picture it showed that there was 2 sets off drills 8mm and 6mm I got the 8mm. am still waiting for the 6mm.when using it I found that the dust extraction port on the bottom was a hinderance I think it would be better on the side. And even better if you could be able to remove it for when you put it away.Just a thought something to think about. An excellent product THANKYOU.
Recommended Products
$80.96
$ 37 .99 $37.99