Your cart is empty.
Your cart is empty. This high precision NEMA 17 Stepper motor has an integrated Planetary gearbox with a 26.85:1 gear ratio, the resolution reach 0.067 deg. step angle.
It's a good solution in applications that need very low rotation speeds and/or lots of torque.
Electrical Specification:
* Manufacturer Part Number: 17HS19-1684S-PG27
* Motor Type: Bipolar Stepper
* Step Angle: 0.067 deg.
* Holding Torque: 3Nm
* Rated Current/phase: 1.68A
* Phase Resistance: 1.65ohms
* Inductance: 2.8mH+/-20%(1KHz)
Gearbox Specifications:
* Gearbox Type: Planetary
* Gear Ratio: 26.85:1
* Efficiency: 81%
* Backlash at No-load: * Max.Permissible Torque: 3Nm(425oz-in)
* Moment Permissible Torque: 5Nm(708oz-in)
* Shaft Maximum Axial Load: 50N
* Shaft Maximum Radial Load: 100N
Physical Specifications:
* Frame Size: 42 x 42mm
* Motor Length: 48mm
* Gearbox Length: 35mm
* Shaft Diameter: 8mm
* Shaft Length: 20mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 500mm
* Weight: 570g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
a teacher
2025-07-23 12:35:38
The stepper motor with 27:1 planetary gearbox arrived in just two days from the time of my order.The motor/gearbox was shipped in a very good box with very good foam padding.The motor was brand-new as advertised and looked very nice.I tried the motor out on my system using a Raspberry Pi 3 B+ with a simple Python code. I was able to drive the geared motor with an L298 driver. With just 5 volts on the driver, I could drive the stepper motor.The motor behaved exactly as a bipolar stepper motor is supposed to behave and the shaft rotated quite smoothly, using 0.05 seconds for each pulse that went from the GPIO board (four outputs pins ) to the four input pins of the driver. Very impressive system for around 40 dollars.If you do not have time to build a planetary gearbox for your NEMA 17 stepper motors, then this will be perfect for you.I am rotating a piece of apparatus that weighs about 5 -7 oz , that has a relatively small moment of inertia. This STEPPERLINE motor worked great for me. Thank you.
Neuxstone
2025-06-23 12:41:57
Used for a clay extruder. Very quiet and dependable. I just put it into service recently and this thing is strong enough to pull stumps!I was concerned with it having the nylon gears and they do offer a metal screw model for more $ but so far so good. It’s nice to know I have an option...
Customer
2025-05-19 13:57:59
I am using several of these to open/close doors in a display. The gear ratio is high enough to get good acceleration control and low enough that they can be back driven if someone moves a door manually. Original order of 12 was lost in shipping but quickly replaced.
J Pike
2025-03-26 10:11:57
Nice high torque but the small amount of gear slop made it un useable for the application I needed.
chris bordeleau
2025-03-20 21:18:04
this motor worked great... plenty of torque and average noise for these motors... I'd buy another if I needed one
Dcdcdc
2025-03-14 13:06:56
It fulfills my needs perfectly. Very strong and reliable.
Julián Toro
2025-02-22 12:19:34
Dispensador automático
Adrian
2024-12-13 13:20:01
The motor overheat if I run it on the DM556 for half hour. My CNC need a motor that can work for hours, not half. Useless because the CNC can run for up to 5 hours.
Miguel Rivero
2024-11-21 12:21:04
Realmente sorprendido por el producto, la calidad y precio, muy buen costo beneficio en el producto.
Recommended Products
$24.48
$ 11 .99 $11.99
$25.08
$ 11 .99 $11.99