Shopping Cart

Your cart is empty.

Your cart is empty.

STEPPERONLINE Closed Loop Stepper Motor 1 Axis CNC KIT 42Ncm/59.48oz.in Nema 17 Motor & 0-3.0A 24-48VDC Closed Loop Stepper Driver CL42T V4.1

5.0 Write Review
Free shipping on orders over $29.99

$65.00

$ 25 .99 $25.99

In Stock
  • This CNC kit includes:
  • 1 x 17HS15-1504D-E1K: Nema 17 Closed Loop Stepper Motor 42Ncm(59.48oz.in) with Encoder 1000PPR(4000CPR)
  • 1 x CL42T-V41: Closed Loop Stepper DriverV4.1 0-3.0A 24-48VDC for Nema 11, 14, 17 Stepper Motor
  • 1 x CABLE-PC-1: RS232 Debugging Cable
  • Suit for 3D printer/CNC machine/Carving Machine/Dispenser/Automation Application


Motor Specification
*Manufacturer Part Number: 17HS15-1504D-E1K
*Number of phase: 2
*StepAngle: 1.8deg
*Holding Torque: 42Ncm(59.48oz.in)
*Rated Current/Phase: 1.5A
*Phase Resistance: 1.65ohms
*Inductance: 2.5mH ± 20%(1KHz)
*Frame Size: 42 x 42mm
*Body Length: 60mm
*Shaft Diameter: Φ5mm
*Shaft Length: 24mm
*D-Cut Shaft Length: 15mm
*Lead Length: 500mm
Encoder Specification
*Output Circuit Type: Differential type
*Encoder Type: Optical Incremental
*Encoder Resolution: 1000PPR(4000CPR)
*Output Signal Channels: 2 channels
*SupplyVoltage Min: 5V
*SupplyVoltagemAx: 5V
*Output HighVoltage: *Output LowVoltage:
Driver Specification
*Output Peak Current: 0~3A
*InputVoltage: +24~48VDC(Typical 24VDC)
*Logic Signal Current: 7~16mA (Typical 10mA)
*Pulse Input Frequency: 0~200kHz
*Pulse Width: 2.5μS
*RS232 debugging interface available
*Low noise and vibration, smooth motion
*Protections for over voltage, over current and position following error


Recommended Products
Usongshine Nema 17 Stepper Motor 42BYGH 1.8 Degree 38MM 1.5A 42 Motor (17HS4401S) 42N.cm (60oz.in) 4-Lead with 1m Cable and Connector for DIY CNC 3D Printer

$7.99

$ 3 .99 $3.99

4.8
Select Option
STEPPERONLINE 27:1 Planetary Gearbox High Torque Nema 17 Stepper Motor 3D Printer DIY Camera

$41.91

$ 21 .99 $21.99

5.0
Select Option
42x40 Nema 17 Stepper Motor Integrated 3.94in/100mm T8 Lead Screw 2000steps/rev High Torque 0.4Nm/56.64oz.in Bipolar 1.7A 2 Phase 4 Lead for 3D Printer CNC, 1.66x1.66x1.58inch

$22.21

$ 11 .99 $11.99

4.6
Select Option
FYSETC Anycubi Photn Motor Replacement Part - 42-48mm Stepper Motor with Lead Screw 240mm/9.44inch: 1.5A 2 Phase 3.45V 1.8° Step Angle Fit Resin 3D Printer Z Screw Accessories

$32.99

$ 14 .99 $14.99

4.6
Select Option
STEPPERONLINE Full D-Cut Shaft Stepper Motor Nema 17 0.9deg 46Ncm (65.1oz.in) 2A 42x48mm CNC 3D Printer

$22.96

$ 10 .99 $10.99

4.7
Select Option
CNCTOPBAOS Nema17 Stepper Motor 78oz.in 48mm Length 1.8A Dual Shaft for 3D Printer/Milling/CNC Router Machine 17HS8401B

$16.99

$ 6 .99 $6.99

4.6
Select Option
STEPPERONLINE Micro Stepper Motor Nema 11 Bipolar Stepping 0.67A 17oz.in/12Ncm 1.8deg 4 Leads

$24.15

$ 12 .99 $12.99

4.9
Select Option
FYSETC Crealty K1 Max Motor Replacement - K1 42-60 Stepping Motor: Nema 17 Stepper 42x60mm Body 1.8 Stepper Angle 2.0A 2 Phase with Synchronous Belt Wheel Pulley for X Y Axis 3D Printer Accessories

$29.99

$ 13 .99 $13.99

4.7
Select Option