Your cart is empty.
Your cart is empty.Product Description
Sunex 936A 36mm Jumbo Raised Panel Combination Wrench, Non-Ratcheting, CR-V
From the Manufacturer
This Sunex 36mm jumbo combination wrench will give you years of usage. It comes with a lifetime warranty which backs the craftsmanship of this CR-MO alloy steel product. It will meet your needs and is at a great value.
Anthony M
2025-09-05 21:05:08
I like the sturdiness and how it is built well. Have not had any issues with this wrench . Solid buy for the money
audif150
2025-09-04 11:25:32
what more can i say, it's a Jumbo 50mm heavy duty wrench.works as intended with no complaints.recommend and would purchase again if someone seals it because this thing will never break.
Jeff K.
2025-08-28 12:04:28
This 36mm wrench fit nicely on the hex, and the wrench itself was plenty solid. Worked great while servicing the water pump on my old V10 Ram pickup!
WPR Inc
2025-08-15 11:47:23
I purchased a torque multiplier. I do not like the attached lugnut leg. I purchased this wrench to use as an extended leg to use with the hexagon exterior shaped torque multiplier. Haven't used it yet but the wrench is massive thick stury steel. I'm hoping it works as I expected.
Robert M.
2025-08-09 11:37:31
Used this tool to remove the fan and fan clutch on my 2002 Chevrolet 4x4 4.4 Ltr V6 S10 pickup. This together with a tool to hold the water pump pulley from turning, and a 3lb engineers hammer, worked great, held up well(Didn't need too much force to remove the fan clutch and fan from the end of the old water pump...) I used old rags on the wrench and the holding tool, and was surprised at how easy it was to remove the fan clutch. Just use the holding tool and this wrench to tighten the fan clutch on to the new water pump, no hammer needed, and it works great !
I VanWinkle
2025-08-02 16:45:27
Seems good & fits the bolts
Cathy Sciurba
2025-07-27 10:19:12
Bought for use specifically on a wood lathe. Quality and price was good.
K Max
2025-07-15 11:40:16
This is a very durable tool. It works for what you need and is strong and you do not have to worry about it breaking. This tool is highly suggested for anyone who does mechanic work.
zozapan
2025-07-07 12:37:16
You can see slight scratch’s do to the what I presume is the machining process but that’s to be expected from a cheaper wrench. That’s my only nitpick. The price was good at $24.30 CAD.
ronald c.
2025-07-02 15:28:22
I bought this 36 mm wrench to take a fan clutch off a Cummins. It worked better then the fan Clutch tools you find on amazon I bought both did not work
Ryan🙋ðŸ»â€â™‚ï¸ðŸ‡¨ðŸ‡¦
2025-06-22 09:40:13
Needed it to crack the fan clutch loose on a gmc canyon 2.9L 2007.did a fantastic job. I was scared it wasn't going to be long enough but it was just the right hight!👌ðŸ»
Chammpy
2025-06-15 19:42:41
Bon achat
rgagne
2025-05-25 10:35:05
Work as intended , im very satisfied with this purchase .
Anthony M
2025-05-23 17:24:26
I like the sturdiness and how it is built well. Have not had any issues with this wrench . Solid buy for the money
audif150
2025-05-16 16:47:02
what more can i say, it's a Jumbo 50mm heavy duty wrench.works as intended with no complaints.recommend and would purchase again if someone seals it because this thing will never break.
Jeff K.
2025-04-29 18:29:58
This 36mm wrench fit nicely on the hex, and the wrench itself was plenty solid. Worked great while servicing the water pump on my old V10 Ram pickup!
WPR Inc
2025-04-22 12:03:04
I purchased a torque multiplier. I do not like the attached lugnut leg. I purchased this wrench to use as an extended leg to use with the hexagon exterior shaped torque multiplier. Haven't used it yet but the wrench is massive thick stury steel. I'm hoping it works as I expected.
Robert M.
2025-04-14 13:12:12
Used this tool to remove the fan and fan clutch on my 2002 Chevrolet 4x4 4.4 Ltr V6 S10 pickup. This together with a tool to hold the water pump pulley from turning, and a 3lb engineers hammer, worked great, held up well(Didn't need too much force to remove the fan clutch and fan from the end of the old water pump...) I used old rags on the wrench and the holding tool, and was surprised at how easy it was to remove the fan clutch. Just use the holding tool and this wrench to tighten the fan clutch on to the new water pump, no hammer needed, and it works great !
I VanWinkle
2025-04-05 10:55:33
Seems good & fits the bolts
Cathy Sciurba
2025-04-02 20:23:20
Bought for use specifically on a wood lathe. Quality and price was good.
K Max
2025-03-20 20:46:23
This is a very durable tool. It works for what you need and is strong and you do not have to worry about it breaking. This tool is highly suggested for anyone who does mechanic work.
zozapan
2025-03-05 10:00:20
You can see slight scratch’s do to the what I presume is the machining process but that’s to be expected from a cheaper wrench. That’s my only nitpick. The price was good at $24.30 CAD.
ronald c.
2025-03-01 14:38:58
I bought this 36 mm wrench to take a fan clutch off a Cummins. It worked better then the fan Clutch tools you find on amazon I bought both did not work
Ryan🙋ðŸ»â€â™‚ï¸ðŸ‡¨ðŸ‡¦
2025-01-23 13:34:14
Needed it to crack the fan clutch loose on a gmc canyon 2.9L 2007.did a fantastic job. I was scared it wasn't going to be long enough but it was just the right hight!👌ðŸ»
Chammpy
2025-01-02 14:03:21
Bon achat
rgagne
2024-12-26 15:49:11
Work as intended , im very satisfied with this purchase .
Recommended Products
$54.24
$ 23 .99 $23.99