Your cart is empty.
Your cart is empty.Material: Aluminum alloy Flaring mode: 45 Degree eccentric type Applicable pipe outer diameter: F6/9/10/12/16/19mm(F1/4inch, 5/16inch, 3/8inch, 1/2inch, 5/8inch, 3/4 inch) Set packaging weight: Approximately 1.5 kg Package Content Eccentric Cone Gantry x 1 Millimeter Flaring Clamp x 1 Inch Flaring Clamp x 1 Pipe cutter x 1 Burr trimming knife x 1 Thicken Plastic Case x 1 Service Card x 1
Andrew A
2025-09-03 11:25:52
I have been in the HVaC field for 15 years, I owned a HFreight flaring tool and a nice yellow jacket one. the yellow jacket was garbage from day one. caused a lot of problems. This tool is awsome, it has an automatic stop release so you cant over tighten, the pipe stop i figured i would never need but turns out it is convenient. I always lube the flaring tool with a single drop of zoom spout so it doesnt gall, and fastest easiest flares and most perfect flares i have achieved this fast.the handle is large so your not struggling toward the end, little physical force.its very solid. I believe this will last close to when i retire. I will buy this for my next one.Just to clarify i pulled my scrap 3/4,1/2,and 3/8 and flared all of those before posting this.
Bearry
2025-07-30 10:25:12
I was originally going to order just the flare tool because I needed to flare the 1/4" line as part of my mini split heat pump install. I decided to buy the kit thinking that a decent tubing cutter and de-burring tool would be nice. First the cutter--it is mammoth,but worked fantastically! As for the flare tool, it wasn't clear to me how to place the flare tool over the block but I some got it on. The guard that ensures the right amount of pipe sticks through the block is nice. I did add a small amount more was was recommended by another buyer. The actual flaring operation went smooth and the clutch stopped from over pressing the pipe. This was a great buy--I was able to vacuum my system down to 170 microns and it works great!
Joe Ragz
2025-05-28 17:57:42
30 Year HVAC tech/business owner here. Yep I have made countless flares since mini splits hit the market. I don’t like the flarespin, and the old block and tackle flare kit will work your hands to death when you have multiple flares at a time. This is a quality tool that makes a beautiful flare skirt. I stick just a smidge more pipe up in the block than what the depth gauge on it is set at. I like the skirt of my flares to just clear the inner threads of the flare nut. This ensures the maximum sealing face contact area of the flare. Again, great tool. The clutch releases at the set pressure so the copper is not splayed out too thin too.
Horban
2025-05-17 16:46:19
Works great. I feel the flare bump could be a little higher to make a bigger flare but so far no leaks and works better than my friends Yellowjacket.
Roberto S.
2025-03-25 13:01:53
Nice tool. A perfect flare always. I used it to install my mini split. First time and not regrets.
Anthony Sims
2025-03-10 15:46:17
Bought this and used it several times. Made a good flare but it seemed a bit unwieldy as I was using it for the 3/4" copper pipes. I had a hard time getting the head over the end piece and the stopper kept getting in the way. Other wise, it worked well
Doglovin
2025-02-14 21:42:54
This tool is outstanding! Best for the price. Helped repair mini split lines, 1/4" and 3/8". The flares were perfect, and the tool didn't damage the tubing.
ELH
2025-01-27 10:27:03
Very high quality. If pipe end is properly prepared - this will make perfect flares with minimal effort. I have used this for multiple flares on HVAC tubing, worked far better than other types I have used.
Jean Pellerin
2025-01-19 17:17:00
Livraison rapide, item de qualité et très facile d'utilisation
Irina and Alex
2024-11-23 18:02:56
I save a lot of time and money by installing split a/c in my house because I had all tools to do it Thanks
Recommended Products
$150.07
$ 72 .99 $72.99