Your cart is empty.
Your cart is empty.Product Description
This nylon 1.5 oz invisible mesh will give you stability and will be invisible and discreet after the embroidery application. If you double it with 2 pieces diagonally superposed, it will increase your stability tremendously. One layer should support 10,000-12,000 stitches of a moderately dense design. If you sandwich a tear away behind it, it should hold a lot more and be more stable to tackle those soft sinking new fabrics on the market today such as performance wear, polyester polo shirts, etc. Available in different sizes:
- 12" x 10 yards roll (White/Black/Beige)
- 12" x 25 yards roll (White)
- 14.5" x 25 yards roll (White/Black)
- 15" x 100 yards roll (White)
- 20" x 100 yards roll (White)
- 7.5" x 8" 100 pre cut sheets (White)
This product is also available in a fusible version for even more stability.
Cut & place the stabilizer under the fabric.
Do embroidery on the desired place.
Cut away the excess stabilizer from the fabric and then trimmed close to the stitches.
1.5 oz mesh will be invisible and discreet after the embroidery application.
2.0 Cut Away, 2.5 Cut Away & 3.0 Cut Away
Cut away stabilizer must be removed by cutting it away and the rest behind the stitch will remain on the fabric for the life of the design.
Cut away stabilizer is considered the most stable stabilizer.
It is typically recommended for unstable and stretchy fabric such as knits and high-stitch count design.
1.5 Light Tear Away, 1.8 Soft Tear Away & 2.0 Adhesive Peel & Stick Tear Away
Tear away stabilizers are used when you wish to remove most of the excess stabilizer from the back of the project after embroidery.
It was recommended to be used on woven fabrics that have no stretch like quilted fabrics, 100 percent cotton, poly cotton fabrics, linen, vinyl, leather…
Water Soluble Wash Away, H2O "Eau" Gone Wash Away & Stitch & Rinse Wash Away
If your project requires no traces of the stabilizer to be left after embroidery, you must use a wash away stabilizer.
The strength of support offered by a wash away stabilizer is significantly less than cut away or tear away stabilizers.
Wash away embroidery stabilizer is recommended for lightweight fabric and Free Standing Lace.
Cloud Cover Stitch & Fusible No Show Mesh
Fusible Iron On stabilizer has a side with shiny coating which can be ironed to the wrong side to the fabric, so it can be fix to the fabric without a hoop.
Using Fusible Iron On stabilizer will prevent stretching of the fabric during the hooping process.
BAS
2025-08-31 13:59:57
I've just started using the stabilizer and so far it works just fine. It's definitely less expensive than others I've purchased.
Vino Chica
2025-08-04 10:28:02
After using almost all of my 100 yards for a variety of projects with my Brother Dream Machine, I'm ready to buy a second 100 yards and vow never to go back to the expensive brands at my dealer or LQS. This performs just as well for me as both the Floriani and Sulky versions of no show mesh. It does not stretch and lays flat in finished projects. It's easy to cut. I love the 15" width for using in my larger hoops.I recommend this for wall quilts, for stabilizing logos and small designs on the front chest of fleece vests and jackets, for bag construction, and other in-the-hoop projects. (Basically anything where the back of the project isn't visible, such as towels.)I've also used it as sew-in interfacing in shirt collars and other clothing construction.This is an excellent product at an excellent price for machine embroiderers.
Alice S
2025-07-14 13:44:23
It does what it is supposed to and that makes me happy.
Dr. Mom
2025-07-05 14:40:23
This stabilizer worked great! I used it to make some in-the-hoop projects. It held the fabric in place during embroidery, and when I finished, I only had to pink around the outside of the project for it to look great. Unlike a paper stabilizer, this mesh adds no stiffness or noticeable rough areas when handling the project. I think it would be good for clothing where the back of the embroidery would be against the skin, since it is soft and flexible. Despite its soft feel, it does everything a stabilizer should do.
Customer
2025-06-05 18:30:00
Just what I was looking for.
Paula Johnson
2025-05-17 19:34:21
The perfect weight. The closest I have come to Kimberbell and a better value! Excited by this product!
Robin
2025-04-25 11:04:33
The media could not be loaded.
Sandy
2025-04-01 12:46:35
I only need one layer when embroidering it doesn't tear through so perfect
Madeleine
2025-03-11 19:16:10
Easy to use ...
Othman Bourhioul
2025-03-02 16:26:54
Very expensive
Pookie
2025-02-23 18:21:19
I love this stabiliser it really is nice to use I like the fact there is less waste
Gail Mom
2025-02-03 11:18:43
Works great for machine embroidery on quilter’s cotton, store-bought aprons.
Jeroen G.
2025-01-02 20:16:59
Fantastic quality. Highly recommended. Easy to purchase here in Canada, where our options cam be limited at times.
Recommended Products