Your cart is empty.
Your cart is empty.Product Description
A little about us:
Whether you're a seasoned Professional Service Technician or a DIY enthusiast at home, we relate because we've been there too.
Supplying Demand is run by a team of service professionals, renters, homeowners, and even some who are just starting to learn the ropes.
Our strength lies in the diversity of our experiences, as we listen to various perspectives and gather feedback on the products we offer and the repair knowledge we share.
What do we offer?
To ensure the correct part, your complete Model information is needed!
At Supplying Demand:
We prioritize spreading repair expertise to those seeking guidance, while acknowledging that certain tasks are best handled by professionals.
Specializing in practical and budget-friendly residential appliance repair components, installation kits, service tools, and accessories, Supplying Demand is your go-to for starting any repair project.
- Refrigerators, Coffee/Espresso Machines, Washers, Dryers, Dishwashers, HVAC and many more!
We proudly stand as The Repair Brand.
MJ28
2025-09-01 18:05:09
I bought this fan to replace the old one on my 20 plus years old fridge made by Amana (Amana tr21v2w-p1315904ww). It worked, but sadly didn't solve the issue because the compressor stopped working. It was a perfect fit like the original.
Trump 2024
2025-08-15 12:09:20
Works as it should
Sean W.
2025-07-30 16:27:40
Replaced the fan motor on my old ge refrigerator. Works great and an easy install. Much cheaper then the true ge replacement motor. Highly recommend
D Edward
2025-07-22 18:18:27
This was super easy to install, and I'm not an appliance repair person by any stretch of the imagination. Took less than 15 minutes and my refrigerator is running like new again.
Chuck Roper
2025-07-15 17:27:16
My refrigerator is a 1985 Kenmore model no. 106.8740980. First noticed freezer wasn't keeping things frozen. Opened back cover and the exhaust fan was not spinning. If I gave the blade a push it would run for a while and then quit. Ordered this new fan and it was shipped quickly and well packaged. I decided there was more room, and it would be easier to take out the three sheet metal screws that held the frame and replace it that way rather than trying to replace the fan motor in place (see pics). Much easier and I could torque the bolts holding the fan down much better this way than trying to do it in the tight confines behind the motor. Everything was an exact fit and it is now working perfectly. Back in business for a reasonable cost and some time. Saved our refrigerator which we can no longer get the same color.
Jumping Bean
2025-07-04 10:26:56
Well it works but it HUMS.Slightly annoying.
Thomas Marchese
2025-06-16 16:22:32
Saved another 15 year old Fridge from the scrapyard, simple fix, 3 wires, 4 small hex bolts to remove from bottom rear of fridge less than 1/2 hour job !
Pen R.
2025-06-14 18:22:53
Worked forMy husband.
EBM
2025-06-09 17:29:04
I used this product to replace a failed condensor motor on an old Amana BC20JW fridge. This product is fully compatible with the original US made product. The older seemed to have a more robust case (likely because it is 20+ years old). The other minor difference is that the original product had an extra screwhole in the housing, to which a grounding wire was attached. This unit does not have that extra screwhole - but if your grounding cable is long enough, you can attach it to one of the screws that hold the motor. My ground cable was not long enough to do this, so I had to extend the cable by attaching extra wire.The unit itself is excellent, and it works flawlessly. However, removing the old unit an installing the new unit in this particular refrigerator takes the patience of Job and the manual dexterity of a carpet weaver. Due to the space constraints under the fridge, it took 4 hours to remove and replace the 6 screws that held the motor and the extension arms.The trick is to remove the fan blade first. Then unscrew the 3 extension arms, each of which is held by a sheet metal screw to th mounting frame. Then you can remove the extension arms from the motor (each held with 1 screw). Reverse this process when installling the new motor.It takes a lot of patience.
Adán Santana Sauceda Medina
2025-04-26 10:37:34
Todo bien llegó rápido
G.W.
2025-02-19 10:47:47
Worked as described. Arrived in a few days ( international ) Was easy to install. Fridge is back to normal.
Customer
2025-02-02 21:40:39
motor fit perfectly on our whirlpool fridge. it only has two wires coming out of the motor unlike the 3 wire original harness. Only issue was the mounting screws were too short, I had to by M4x15mm screws to mount the motor.
Mo Labricole
2024-12-24 13:31:17
L'installation s'est bien faite, les trous des vis sont comme celles de l'ancien moteur. Il suffisait d'une adaptation pour les fils électriques et ça tourne silencieusement. Super !
Recommended Products