Your cart is empty.
Your cart is empty.Product Description
Product Feature
- The Product is Sturdy and Durable and Has a Long Service Life.
- Easy Installation and Disassembly, Good Sealing Performance.
- It Can be Used for The Connection of pipes and The Use of Different Pneumatic Components, and Has a Wide Range of Uses.
- You Can Easily Insert or Pull out the Trachea Without Any Tools
- The Clip of Connecting Air Pipe is Made of Strong Plastic Material, Which is Not Easy to Fall off After Connection Adopt Sealing Component, Keep Good Sealing, Not Easy to Leak.
- Freely Change Pipeline Direction After Installation,Easy to Insert or Pull Trachea Manually Without Tools.
The Story Of Tailonz Pneumatic
Tailonz Pneumatic Professional Production of Pneumatic Parts, Air Filters, Solenoid Valves, Pneumatic Pipelines and Other Pneumatic Components.
We Develop Tools and Products for Ourselves and Our Customers Based on Actual Needs and Expectations.
All Products Are Directly Produced from the Factory to the Warehouse, We Ensure That Every Link, Every Process.
SCF-1/4 Air Flow Control Valve
Product Parameter
- Working Pressure:0-1.0mpa | 0-145 Psi
- Size:1/4" Tube OD x 1/4" Tube OD
- Body Style: Speed Controller Union Straight
- Applicable Tube: Polyurethane and Nylon
- Fluid Type: Air Only
- In-line Air Flow Control Valve for Controlling the Speed of Low-speed Pneumatic Cylinders
- 1 × SCF-1/4
Product Feature
It Can Rotate 360°
- Simple And Dexterous,Convenient Installation.The Tube Can Rotate 360° Even After Installation.not Easy To Leak, Good Sealing Performance, Long Service Life.
Locking Spring
- Locking Spring, Made of Stainless Steel Material, Corrosion Resistant. the Clamping Force is Effectively Improved.
Flow Adjustment Button
- The Top Rotation Button Adjusts the Flow of Compressed Air，LSA Fittings Can Adjust the Flow Size to Meet Different Needs. (butcannot Completely Shut off the Air Flow)
- After the Tube is Connected and Installed, Pull the Tube to Make Sure That the Tube Cannot Pull out the Fittings.
- When Inserting the Tube, It Must Be Inserted into the Bottom of the Fittings. Failure to Insert the Tube into the Bottom May Lead to Air Leakage.
- Make Sure That the Cutting Surface of the Tube is Vertical, There is No Scar on the Outer Circumference of the Tube and the Tube is Not Oval.
- Tube Fittings Are Easy To Install, Flexible And Space-saving, 360-degree Rotate Freely, Release Rings Adopt Ellipse Design, Which Can Be Removed Conveniently.
- Do Not Exceed 145Psi Pressure.
- Working Temperature: 32～140°F,do Not Use Outside the Service Temperature Range to Prevent Deformation of the Sealing Material and Easy Leakage.
- Do Not Use in Places with Too Much Dust or Particles
- Do Not Use Any Medium Other Than Air. the Product is Limited to Air or Vacuum Environment.
- After Completing the Connection, Please Gently Pull the Tube with Your Hand to Make Sure That It is Completely Connected Without Falling Off.
- Make Sure That the Cutting Surface of the Pipe is Vertical, There is No Scar on the Outer Circumference of the Pipe and the Pipe is Not Oval.
- Never Apply Tube Joint with Additional External Load(bending,twist or Pulling),otherwise Damage or Leakage Will Be Occurred.
- When Inserting the Pipe, It Must Be Inserted into the Bottom of the Joint. Failure to Insert the Pipe into the Bottom May Lead to Air Leakage.
- In Order to Prevent Leakage, Please Pay Attention to the Above Matters.
Rusty Minter
2025-08-20 17:38:10
Perfect for my pneumatic project
Joe M. Dragavon
2025-08-14 13:03:25
I was able to reduce the flow rate and avoid the 'sonic burst' even at 5psi CO2 pressure through the solenoid. Great to control low flow CO2!
JAY
2025-05-13 18:34:31
Easy to install. Easy to use the air flow regulator.
the warm dude
2025-05-05 15:28:25
I first tried the valves by connecting as the image in the description shows and I couldn't get the flow to shut off at pressures under 10 psi. Then I thought about it more and looked at the poorly shown diagram which shows the direction. Actual flow is mirrored from pics in the description. Swapping directions fixed that problem.For the cost, they work fine.
Joseph
2025-04-19 21:22:34
one of the valves was loose inside the plastic molded container where the pot is turned -- wish i realized it before i wired and mounted it up - but oh well - lost maybe 1/2" of line and this pack included many valves so i just replaced with another. the other 2 i am using work fine. no noticeable air leaks and i don't have the best crowns on the line either. very satisfied
Nate
2025-03-13 12:07:33
I will start with this... if you need to control the flow of air to a low flow rate (like 1-2 CFM) this is not the device for you.I cranked down on it to try to get the air flow regulated but it simply will not go that low. It slowed air flow down a little but not much... I cannot recommend this product.
ZRO
2025-03-07 11:02:20
Worked as described
ken m.
2025-02-20 18:15:39
Working with pneumatic air line, this push to connect adjusters, work extremely well, and easy to fine tune. Would recommend.
PF
2025-01-10 12:43:49
Review of TAILONZ PNEUMATIC 10mm Air Flow Control Valve,These control valves are used to to control speed by restricting the air flow, no so much a pressure reduction but a quantity reduction, as advertised these are for pneumatic cylinders and control the speed the pneumatic cylinder arm exits the cylinder to move objects attached to it, such as opening and closing a door.The maximum working pressure stated for this valve is 1 MPA = 10Bar = 145Psi, the quantity of air supplied controlled by the top screw moved downwards to restrict air flow, this knurled for grip as is the locking ring on the thread, two screw holes at either side of the flow restrictor allow for permanent fixture.The 10mm air supply pipes are push fit into the connectors either side and are designed to grip tighter the more pressure applied also to allow 360 degree movement of the valve for positioning, the blue ring outer can be pulled towards the valve body to release the air supply pipe if required.In use these valves work as intended, appear of quality construction and easy to use, once adjusted the screw can be locked to maintain specified air flow. With the materials used for construction one can easily imagine they will offer a good lifespan in use.
CableGuy
2024-12-26 11:33:55
Ein sehr guter Regelventil das überall montiert werden kann und die Feineinstellung funktioniert sehr gut.
Antonio Jesus Pavon Mauriz
2024-12-25 14:00:20
Auque la válvula está diseñada para regular aire, yo la uso para regular el paso de taladrina y funciona perfectamente,
gianluca
2024-12-16 15:36:11
È una azienda molto seria prodotto ottimo
Printier
2024-11-16 17:28:04
A pretty standard pneumatic speed controller with check valve in the reverse direction.Comes with a locking nut to keep the setting.The cracking pressure of the check valve is approx 110mbar. (10mm tube version)
Recommended Products