Your cart is empty.
Your cart is empty.Product Description
60PCS 1/4"-20 Threaded Inserts
170PCS Threaded Inserts Nuts
30pcs 1/4-20 x 3/4" Flat Head Socket Head Screw
30pcs M6 x 30mm Flat Head Hex Socket Cap Screws
belinda
2025-08-07 16:15:36
They worked well for me. Just what I thought I was getting
Dave D.
2025-06-19 10:34:29
I used these threaded inserts to attach the legs to a coffee table I built, so that the legs can be removed later if needed.I had no problem at all installing these. Drilling the correct size pilot hole is critical. For soft woods like pine, a 3/8" hole would work, however if installing in a very hard wood (or MDF in my case), I found that a slightly larger bit - 25/64" allowed the inserts to bite into the hole without cracking the wood or requiring excessive force to get them seated.These appear to be made of steel, and not the inferior pot metal or zinc prone to crumbling found in other inserts.
David & Abigail Kligmann
2025-05-23 19:46:10
I bought these along with a jig to drill straight holes. but they wander a little if you don't hold them perfectly straight when you fasten them. I've had mine wander about 1 1/6 inch
Electro
2025-04-06 10:22:10
Already buying more. For Spoil bord inserts this is a must!
Nasser Ahmed
2025-01-29 16:14:51
Ease of installation value of the money.
Edward Ratliff
2025-01-16 12:22:35
just what i needed
aaron
2025-01-03 11:16:32
The media could not be loaded.
Lester
2024-11-20 15:13:16
I built a desk top out of Cherry and installed some metal legs I had ordered last year. easy to install and had no problem with them stripping. I would recommend threading the screw into each one before installing as that will clean out any flashing or shavings in the insert before installing the insert into the wood.
Recommended Products