Your cart is empty.
Your cart is empty.Product Description
Latch Switch
This is a Latch type switch, which means the footswitch will turn on when it’s pressed, and will stay on until it’s pressed again. So it doesn’t need player to press on it continuously
TS Cable
Come with 1/4"(6.35mm) TS jack. It's compatible with anything that uses a mono 1/4" jack. Cable is 2 meters long, so that you can remote control your device.
Anti-skid Design
There are two anti-skid pads on the bottom of this pedal. It won't slip away when it is on the ground and step on it. It is safe and reliable.
K11-S / K11-SL Tap Switch Pedal
Here are two types of tap switch pedals to meet your different needs. K11-S is a unlatch type switch, which means that the footswitch will stay on only when it’s pressed. K11-SL is a Latch type switch, which means the footswitch will turn on when it’s pressed, and will stay on until it’s pressed again. So it doesn’t need player to press on it continuously . Both footswitches are come with TS cable. They are compatible with anything that uses a mono 1/4" jack. Mostly it is used to switch effect pedals on/off or switch amp channels.
Package Including:
- 1* K11-SL Tap Switch Pedal
- 1 * TS Cable(2 meters long)
- 1 * Green Footswitch Topper
- 1 * Velcro
Four types of Switch Pedals: Pick the suitable one for your playing.
K11-01(Unlatch Dual Switch)
- Come with 2 meter long TRS Cable.
- The footswitch will stay on only when it’s pressed.
K11-01L (Latch Dual Switch)
- Come with 2 meters long TRS Cable.
- The footswitch will turn on when it’s pressed, and will stay on until it’s pressed again.
K11-S(Unlatch Tap Switch)
- Come with 2 meter long TS Cable.
- The footswitch will stay on only when it’s pressed.
K11-SL(Latch Tap Switch)
- Come with 2 meters long TS Cable.
- The footswitch will turn on when it’s pressed, and will stay on until it’s pressed again.
B a r r y
2025-08-11 18:57:06
I bought this as a parts donor to build a foot switch for a smoke machine. The switch seems well built and responds reliably, and the metal case is durable. The case was easy to open to replace the 1/4" jack with a 5 pin MIDI cable for my use. As a bonus, a short 1/4-1/4 cable was included in the box.
Diane
2025-05-19 15:00:58
Used to trigger studio talkback while hands are occupied. Works as designed and build quality is solid enough for foot actuation. I’ve repaired studio electronics for years and would have no issues recommending this despite the fact that foot switches take a lot of abuse.
Wally
2025-05-14 12:12:20
Works perfect between the four modes with the MXR Rockman X100 pedal! Seems well built and sturdy. Best momentary switch I found for the money. Would buy again!
Customer
2025-05-08 11:51:00
This was purchased for switching settings on a Boss Angry Driver. Instead, it became the on/off switch, and the pedal switch became the channel switcher. So, it works, but in the wrong way. I'll keep it only avoid the hassle of a return.
Dave Starns
2025-04-30 12:11:37
This switch does a simple thing in a straightforward, reliable way. I’m mainly posting this to help people who are looking for a “side†switch to turn a feature on another pedal on and off, but might be slightly confused by the “latching/non-latching†distinction. If that’s what you need, this is your huckleberry. I use it to toggle back and forth between Overdrive Special and Steel-String-Singer modes on an Unobtainium Raw pedal. Crazy Tube Circuits (the Unobtainium manufacturer) sells a switch to do the same thing, but I couldn’t see spending over $40 just to have a switch with the company logo on it.
FOM
2025-04-14 20:10:41
I'm using this on the new MXR rockman 100 pedal. Works perfectly at a much cheaper price than the MXR version. Highly recommend
MH
2025-04-08 14:32:52
Works great!
Moshe Saka
2025-01-15 12:27:43
Super easy to use and to set up, does not mess up sound in any way, size is efficient, great quality, overall great product. This is a latching pedal, meaning it’s a toggle button rather than a hold button
Recommended Products