Your cart is empty.
Your cart is empty.Tapcon anchors are masonry screws designed with Advanced Threadform Technology which cuts threads into all masonry materials including concrete, block and brick. Many applications that include shelving brackets used in electrical equipment, HVAC strapping, 2x4 lumber, wood headers, window frames, jambs & sills, door frames to masonry, plywood backer boards to masonry & exterior installation into masonry. Approved for use in ACQ treated lumber.
mike liu
2025-07-31 18:58:14
The real deal,and way cheaper than rip off home depot price. Wish they had hex head but torx is fine for my application. Would absolutely suggest buying here(I won't even go look at local hardware store anymore unless I newd hardware like immediately!)
s s
2025-07-20 11:40:46
I didn't use the included drill bit, but I pre dilled holes for these in a concrete slab using a hammer drill and then screwed these in and they fit tight with no breaks. Make sure you drill the hole longer than the screw.
Cory
2025-07-17 10:05:09
Generally works as expected but I did twist one off attaching a pocket door frame to our basement floor.
Jim
2025-07-07 19:43:36
I have used this product for many years always been satisfied does a very good job
Gordon Wilson
2025-06-27 17:00:18
These are great for 2x4 onto concrete, The heads don't strip out or break off. I actualy thought I had broke a head off but it turned out to be the concrete striped out ( probably too green).
jimk887
2025-06-13 12:47:40
The tapcon products work great, but I only received 90 fasteners in the box, where there should have been 100 in the box. The drill and driver were included as advertised, just was short exactly 10 fasteners. Not sure why there was a shortage. The fasteners themselves are great!
Clifford Foreman
2025-05-13 14:31:51
Love it
Customer
2025-05-10 14:48:31
These are Tapcon so they work as always. I bought these with the hope that the included drill bit would be enough of a quality I could get through approximately 10 to 12 pre-drilled holes for the screws. I got two completed and then had to switch out to a new bit to complete the rest of the job. Again the screws are fine but the included drill bit just doesn’t make this package and overall good value.
Ivan2
2025-01-19 18:05:48
A good price point!
TGT
2024-12-31 12:01:23
I like the Torx drive, works well no slip when driving. The drill bit cuts well and lasts a long time.One thing to be cautious of, if the anchor is getting too tight to drive you may need to clean the hole again. I sometimes go in and out to help with cutting the threads in the concrete. Make sure the hole is deeper than the screw this will leave some room for material that the screw loosens. If the hole is too shallow the screw bottoms out and snaps off while driving
Rizwan Rao
2024-12-25 13:26:59
The box that I received was already an open box. So, I started to count the concrete screws. There were 99 in the box and not 100.
Recommended Products
