Your cart is empty.
Your cart is empty.Product Description
How To Make Homemade Candle?
- Pass the wick through the hole at bottom of mold and pull it through, thus one inch of wick is sticking out of the bottom of the mold;
- Coat the molds with oil before pouring wax;
- Coil the wick that is sticking out of the bottom of the mold. Roll the mold sealer into a ball. Press it over the coiled wick to seal the hole in the bottom of the mold.
- Prop a bar across the top of the mold. Then tie the long end of the wick up to the Wick Clips.
- Drop the melted wax into the mold,Make sure the wick is centered.
- Let the candle cool completely. about 1 to 2 hours. Remove the mold sealer from the bottom of the carton.
- Remove the candle from the Mold(Small tips:The molds is Freezed at -4℉ in the refrigerator for 15 minutes, it will be easier removal of the contents once it has set).
Candle Mold Kit:
Size 1:
- Height: 3.94 in(10cm);
- Diameter: 0.86 in(2.2cm);
- Wax Needed 1.40oz;
Size 2:
- Height: 5.90 in(15cm);
- Diameter: 0.86 in(2.2cm);
- Wax Needed 1.94oz;
As a Gift.
- 2pcs 30 Ft long wicks;
- 1 pc lead wire;
- A mold sealer;
- 2pcs candle wick clips.
This mold can be used for paraffin, wax, Palm Wax, beeswax candle making;Any wax works in this amazingly easy mold.
Tigress
2025-09-03 19:20:59
Excellent product with great instructional video. Be sure to oil the mold well. The candles will practically slip out when you start opening the mold. I put my molds in the fridge while the wax solidified. It also helped with an easy removal.
Stormy Leaf
2025-08-13 17:37:59
Perfect mold for what I need!Tip: Use mineral oil inside the mold with a paint brush beforehand and your candle will come out rather easily.My method: mineral oil, placing wick, pouring the soy pillar wax and letting it cloud almost fully before placing it in my deep freezer for 10 minutes to quicken the final cure. The tip will break if you rush your wax.Mold is designed well, functional, strong, withstand changes in temperature, doesnt leak, and (when prepped correctly) candle comes out with easeI need 3 more to keep up with my production. Plan on purchasing them soon...unless the seller would like content in exchange...Either way I'm getting 3 more so I can make 6 candles at a time 😊
Douglas S.
2025-07-18 20:34:22
Good value! They work great. Only 2 things to remember. Lube the molds before u poor! Or the candles will be hard to get out. If there still hard to get out u can put them in the fridge for about 15 minutes to help the wax to release so u can get the candle out. Second thing to remember is the candle only comes out one way. Other then that I like them
Robert Sandifer
2025-07-13 16:03:25
Outstanding product! On the very first try we had some beautiful bees wax candles that were internally dressed for my clients. Regardless if you use a mold release spray or a bit of veggie oil in a pump spray bottle you will ZERO sticks. After the pour we immediately place them in a cool refrigerator and demoed is fast. We have 100k viewers on TikTok and they love these once we showed them the best way to use them.
Mary O'Boyle
2025-05-28 11:28:42
One of the molds works really nice but the other tube's cap came broken 💔 Can Amazon send a new one?
ccbenn
2025-05-12 15:35:35
Works very well for me
Tanya D.
2025-05-08 12:03:49
Ok, so I will tell you what I do, I make sure my wax (beeswax) is about the 200 degree F before pouring. But I prepare my molds with vegetable cooking spray and let it coat by sitting upright to drain. I then make the tips of my wicks, either dipped into the wax, if not soak the wicks completely, until the bubbles leave the wicks when completely submerged, neither way is better and both burn down the same. I let my wax solidify somewhat, keeping the level enough below the fill line, you WILL get sink holes, you simply heat your wax back up and fill the hole back in, covering the top layer slightly. You can let them cool slightly before placing them into the freezer, 15 to 25 minutes. Remove them from the freezer, and gently push them out. If they don't come out, place them back into the freezer for 5 minutes more. I have used a hair dryer to melt a little the stuck one, but found its just better to let your freezer do the work. Perfect! Thank you and God bless
Geagles
2025-04-18 13:48:17
Do not get.That was a waste of money, like everyone said in other reviews hard to get out of the mold.Find a way to have the mold split in half just a suggestion.
Judit Schwartz
2025-03-30 19:02:31
very poor quality… I followed the instructions and still could not remove the candle from the mould… do not buy it
Amber P
2025-03-15 12:39:28
Got pkg yesterday, I've made 3 sets of candles with no issues. I need another set to make more quickly.Happy with purchase will order more.
Phillip St.Amand
2025-02-27 12:45:42
I got some candles made thanks
johanne brousseau
2025-02-26 12:34:30
d apres la vidéo elle réussi a sortir facilement les chandelles mais ca pas fonctionner pour moi j ai due les tremper dans l eau pour les sortir
Karen L.
2025-02-17 11:08:50
Can’t get the candle our if the mold no matter how I tried or what wax I used. A complete waste of money
Recommended Products