I purchased this router to help hang new doors while doing repairs at my dad's house. I needed to build new door frames on a garage which meant routing out the location for the hinges, and the striker plate, and I didn't want to have to use one of my full-size routers to do the job. This router seemed to have all the right features for a reasonable price, so I decided to give it a shot. When it arrived I was impressed with how well-built it is. I quickly inserted a router bit, and setup my hinge template and went to work. The router made quick work of the job, and did it without hesitation. It made quick, clean cuts and held its depth setting firmly through the entire job without need for any readjustment. I later used it to do some flush trimming work on some 1/2" material I was working with, and it worked equally as well on that.I am thoroughly impressed with the power and performance of this Router, especially considering the price. This is an incredible value, and I would recommend it to anyone looking for a small, lightweight trim router with exceptional power, that is built as well if not better than some of the big-name brands, at a far better price!

Update*****now that I have been using it for a while and I have gotten a hand on the way it is going to try to kick back and bite into the wood, I think it is a good little router and I ended up buying a mounting plate and the crank in order to raise it up and down,in my opinion was the best thing to get for the router and it is so much easier to use now, I gave it another star to bring my review to a 4 star , but If it came with a mounting plate it would be 5 stars, but that's going to cost you about $50 more to get, and the price is around $100 or more and I could have gotten a more stable router for around that price,,,,,, but considering the price of the item and the other stuff that you get with it I feel like it is definitely a 4star item and it is a good little router , but it is a great one when you are able to mount it to a work bench.**Update above**So I don't know how long it will be to get the hang of the router, I was trying to find something that was going to be able to get the job done, had bits, accessories, and had a carrying case as well, and it has all of the that, but I think it would have been better off to get a higher quality tool and purchase the accessories and case separately, the router is not terrible,it will work for the most part, but it's going to take a few trys to get it done right the first time, I was rounding the edge of a 1X6 pine board and it has speeds from 1 to 6 (not sure why 🤷🏼‍♂️) because I was not able to tell a lot of difference between 2 -5, 1 wouldn't even cut it and chocked it down and 6 was bitting into the wood and jumpy but it was the best speed to get the cut, and I will take the blame for me not having a better grip on the router, but I had been using a ROTOZIP REBEL that I had since the 90s, and it puts me in the mind of it, but it finally quit working after 30 years and I'm don't believe this one will last any where near that long (3 years if you are lucky)🙏🏼, I did give it a 3 ⭐ star review because it does work and it is a nice little case that holds the bits, router, and the other accessories all neat and in one unit. Now this is pine boards, not oak, hickory or something else that I'm not sure what will happen when it is used for a hard wood boards, but I will definitely give it a chance to impress me,(I've got 30 days before I can't return it) 👨🏼‍🔧 and after I got a few more cuts and get a little bit more used to it, I will definitely update the results and give another review, but don't expect to get any extra info from the instructions, it's 22 pages but it's only one page 📄 that is in English and 21 pages of all other languages, I was surprised 😯 that they were that many languages out there.🤐 It's not very quiet 🤫 guess I am expecting it to work on a professional level and cost only an amateur amount, goes to the old saying you get what you paid for, in this case maybe you didn't get what you paid for?

The TEENO Wood Router has been a reliable tool for my woodworking projects, including carving my desk tabletop. It performs well, and the speeds and included bits are helpful for a variety of tasks. However, I did notice it occasionally locks up under heavier pressure, but it’s manageable with careful use. Overall, it’s a good value for the price and gets the job done effectively.

bought it for the price and the amount of heads it came with, used it once eventually and gave up on it because of the amount of materials and time I wasted since it wouldn't stay at its set height level, so every time I progressed 2", it would drop and mess up my project. so mad I wasted money on this and didn't do some test runs before the window closed. I thought maybe I didn't tighten it enough or it was just at the wrong placement. but the amount it shifted, the thing is just inherently crap. don't waste your money on dead weight. presentation is enticing, with the box it comes with and all, but none of that matters if it flat out just doesn't stay at the oriented height you need; at that point, its just a glorified moving drill.

This router tool has been so incredibly helpful in preparing my house after a Flooding event . It’s small, but powerful and extremely user-friendly . It comes with so many different types of bits . It’s just an A - rated product in my opinion .

Wow this unit works amazing and comes with so many bits

It met my needs for a specific project, rounding the corners on a sharp table edge. It includes many bits for other purposes. It can be a challenge to get the adjustments just right, be sure to practice on scrap material as directed.

As a woodworking DIYer, the router is a great addition to my current tools. It is super compact and comes with all the accessories, including 12x 1/4" shank bits, 1x straight guide, 1 x trimming guide, 2x wrenches, and 2x replacement carbon brushes. It has a max speed of 32kRPM and has 6 variable speed adjustment. The manual provides details on how to operate the tools for 1st time user as well.

Esta rebordeadora roja es una herramienta imprescindible para cualquier entusiasta del bricolaje. Su diseño ergonómico y su potente motor permiten un acabado preciso y profesional en cada proyecto. La cuchilla ajustable facilita el trabajo en diferentes superficies, mientras que su ligero peso reduce la fatiga durante su uso prolongado. Además, su vibrante color rojo no solo es estéticamente atractivo, sino que también la hace fácil de localizar en el taller. La durabilidad y eficiencia de esta máquina superan las expectativas, convirtiéndola en una inversión valiosa para quienes buscan resultados impecables en sus trabajos de acabado. ¡Altamente recomendada!

Titolo: "Versatile e Potente - Un Must per Gli Appassionati di Lavori in Legno!"⭐⭐⭐⭐⭐ 5 stelleHo recentemente acquistato il Rifilatore Fresatrice Verticale TEENO da 650W e devo dire che sono rimasto molto soddisfatto delle sue prestazioni e della qualità costruttiva complessiva. Se sei un hobbista o un professionista che lavora il legno, questo strumento è sicuramente un'aggiunta essenziale al tuo arsenale.La potenza del motore da 650W è impressionante, permettendomi di affrontare facilmente una vasta gamma di progetti, sia piccoli che grandi. La regolazione delle velocità variabili, che vanno da 15000 a 32000 RPM, offre una notevole flessibilità per adattarsi alle diverse esigenze di lavorazione. La funzione di regolazione a 6 velocità mi ha permesso di ottenere finiture precise e lisce su legno duro e morbido.Il TEENO ha dimostrato una stabilità eccellente durante l'uso grazie alla sua costruzione robusta e alla presenza di gommini antiscivolo sulla base. Ho apprezzato il fatto che il prodotto sia progettato per essere utilizzato anche in verticale, il che ha semplificato notevolmente il lavoro su progetti più complessi.L'inclusione di un cutter di fresatura da 1/4" e di un mandrino da 6.35mm è stata una piacevole sorpresa, poiché mi ha permesso di iniziare a lavorare immediatamente senza dover acquistare accessori aggiuntivi. Entrambi gli accessori si sono dimostrati affidabili e in grado di affrontare vari compiti di fresatura senza problemi.Una delle caratteristiche che ho apprezzato maggiormente è stata la facilità d'uso. Il design ergonomico e la presenza di comandi intuitivi hanno reso l'uso di questa fresatrice un'esperienza piacevole. Anche i cambiamenti degli accessori sono risultati rapidi e semplici, permettendomi di risparmiare tempo e concentrarmi sul mio progetto.Unico piccolo neo che ho notato è stato il rumore durante il funzionamento, ma considerando la potenza del motore, è stato ragionevole e in linea con altre fresatrici simili.In conclusione, il Rifilatore Fresatrice Verticale TEENO da 650W è un'ottima scelta per chiunque sia coinvolto in lavori di falegnameria. Con la sua potenza, versatilità e qualità costruttiva, è diventato uno strumento indispensabile nel mio laboratorio. Lo consiglio vivamente a tutti coloro che cercano un prodotto di qualità a un prezzo ragionevole.

نوع جيد للهواة

Heel handing en werk heel goed ben tevreden

Good product