Your cart is empty.
Your cart is empty.Product Description
Ideal for wood trimming, grooving, and drilling.
- Rich accessories
- Clear plastic fixed base
- Rubber-covered handle
- Efficient cooling system
- Small and lightweight body
- 30000 RPM, 6.5 amp powerful motor
- Smooth rack-and-pinion depth adjustment
Clear view, easier operation
The clear plastic fixed base provides a better line of sight while trimming.
What You Will Get：
- 1 x compact router
- 1 x 1/4" to 1/2"router router collet
- 1 x Straight Guide
- 1 x Guide plate
- 1 x Trimming Guide
- 2 x Wrenches, 6 x Carbon brush
- 1 x Bolt , 1 x Screw
- 15PCS 1/4" Shank Woodworking Router Bits Set
- 1 x manual,10 x sandpapers
Warm Tips:
- To avoid an electric shock, please pay attention to the safety notes on the manual book. Read carefully before operating the machine.
- Take care of the blade bit, as it may hurt you if held improperly.
- Before installing or taking off the blade bit, please pull the plug out!
- Make sure to tighten the blade enough so it won't loosen during work!
Extra tips:
- Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
- Please understand that colors may exist in chromatic aberration as the different placement of pictures.
Specifications:
- Voltage: 110V
- Power: 800W
- Motor speed: 30000R/MIN
- Trim diameter: 6.35mm| 1/4 inch
- Motor material: copper wire motor
- Suitable for: Home DIY& Industry
- Size: 20 x 9 x 8.3cm/7.87 x 3.54 x 3.27inch
Quick Change
1/4" to 1/2 "router router collet for quick change.
Deburring
10 pieces of sandpapers for deburring.
Removing Bearings
Allen wrench for removing bearings.
Two ways to work: W/ Trimming Guide
Roller running along the curve to ensure exact cutting
How to replace the carbon brush
- Step 1: Open the cap on the side
- Step 2: Pull out the carbon brush
- Step 3: Replace a new carbon brush into and screw the cap on
- In order to better protect the motor, we recommend you to replace a pair of carbon brushes after using for 50-60 hours.
Two ways to work: W/ Trimming Guide
To ensure stable straight processing on thicker models.
Cindy
2025-09-05 15:29:01
Great quality light enough for older lady to use comfortably!!!
John G
2025-08-02 18:47:15
The first one came cross threaded so when I slid in the first bit and tightened it, it was impossible to break loose. They sent a replacement and it does the job, the biggest issue I had was power, which I expected somewhat. This works best with a lot of very shallow passes. The flush trim bits aren't too useful seeing as you can't just run through a sheet of half inch plywood without it bogging down. But this does shine on edge profiles. If you intend to use it for round overs and chamfers you should be good.
raul escobar
2025-07-16 18:07:36
lo malo que tiene es que no se puede regurar la velocidad
Robert Parslow
2025-07-09 17:56:53
The only issue I have is, when free-handing, it is difficult to stay on track as the plastic plate doesn’t allow a good view of my lines, though it is clear. Like the size and power.
brittany
2025-06-20 17:43:36
You get what you pay for and safety has no place in the minds of the people selling these. I should have taken it as a sign when I plugged it in and had the toggle switch turned to "off".. and it started up immediately - off=on and vice/versa.The collet was frozen in place (took a couple tries with different REAL tools, finally it was a 17mm wrench and 6" needle-nose vice grips that did the trick). The "tools" they provide are utter crap, basic stamped shapes that don't fit properly and bend when you try to use them.Not only is there no variable speed here.. not only is the on/off switch reversed... But no, there is no telling just how powerful this thing is... I've got nearly a decade of experience under my belt with tools like this and take it from me.. this thing is not meant to be used by hand. You can't control it past the first 20-30 seconds. Too powerful for a handheld tool, unbalanced, made dangerously, SERIOUSLY NOT WORTH IT!!Going to try to return but not holding out much hope (it's been a couple of months since purchase). Probably going to have to mount this and build a table for it.. or scrap it and turn it into a helicopter.
Greg Quetel
2025-05-15 12:49:50
When you crank this little router up you will be more than satisfied. It has the power and flexibility I need for those smaller yet demanding jobs. I have used the included bits as well as my other bits and the cuts are smooth and precise. The instructions are not as clear as I would have liked, especially if you are a beginner. You will be able to figure things out after a practice cut or two. Experienced router users may have to "suspend" their usual approach and adjust accordingly. Still, newbie or veteran, this router will perform as nicely or better than others in this price range. A more anti-slip coating or strip would have just pushed this over the top. So far, no problems after quite a few uses.
Vinnie Da Arm
2025-05-11 21:30:38
UPDATED 26-May-2023: I RARELY update a rating purely based on customer service. I REFUSE to if a company pushes me to (even when they offer free stuff). TOTALLY UNETHICAL!Now to the heart of my update on this one. I can't believe how fast this seller responds. Compared to 90% of other sellers on Amazon I've dealt with it's unreal. They responded overnight every single time I contacted them with questions. They fully resolved the issue I had with my new router. Stunning. I still believe this version of the router has some very substandard parts on the foot (the router itself is great!) but I have to say the seller has been stellar. And customer service matters when so many do not stand behind their products. Well done THINKWORK. Well done, indeed._____________________I was worried this was going to be super cheaply made for the cost. I thought it would be underpowered at this price, but it feels solid and worked like a charm edging some pine desktops I needed. The little cam cog that is used to adjust the depth was cracked upon receipt. It was not a shipping thing, it's really thin and cheap. Also, the screw heads in the foot are SHARP. I didn't notice and it wound up scarring one of my projects irreparably. Really bad. I'm still going to use the board, but I can't use it for finished work now. I bought and replaced the screws with flat ones. $80 down the drain for that nice piece of pine.Again, I was pleasantly surprised at the feel of moving it and the smoothness of the included bits, but those QC issues shouldn't have happened, even at this price.
Luis Natal
2025-04-23 13:36:06
Good tool well made
Gustavo
2025-04-13 16:49:15
Buenproducto
Cesar gonzalez sanchez
2025-04-10 09:42:26
Funciona.muy bien.
Jonathan Morales
2025-03-26 11:11:11
La verdad lo compre con bajas expectativas y me sorprendió gratamente... Lo utilizo para bordear tablas de pino y funciona correctamente, buena velocidad y fuerza, fácil de usar... Si buscas algo para uso ligero medio este Kit lo Recomiendo Ampliamente.
Gonzalo
2025-03-11 15:59:14
El equipo en sà funciona bien, solo las guÃas quedan a deber mucho en cuanto a calidad y precisión también la calidad de las fresas me decepcionó muy baja su calidad
Juan Vicente Mondragon Guerra
2025-02-16 18:38:09
al estar usando en el trabajo, la llaves de apretar la broca se doblaron, la base de plástico para nivelar la altura el tornillo se barrio y al estar haciendo guÃas con las brocas se movÃa el nivel y la broca se salÃa de mas cambiando la profundidad de la guÃa, y ya no lo puedo utilizar porque el enrutador de 1/4", donde va colocada la broca se queda apretada, y no se puede sacar fácilmente, y para colocar el enrutador de 1/4" a 1/2", no entra, no sirve el aparato.saludos
Recommended Products
$279.00
$ 99 .00 $99.00