Your cart is empty.
Your cart is empty.Ticon Industries – 4” Stainless Steel V-Band Clamp (qty 1) – 119-10200-0000 Fits 4 Inch or 102mm V-Band Flanges that have a 4 5/8" Flange OD. Fits Typical GT42 turbo outlet with 4" Vband 4 5/8" OD Discharge. Clamp Dimensions: Min Flange OD 4.5"/115mm - Max Flange OD 4.75"/120.65mm and 1/4" Combined Flange Apex Width!
Customer
2025-08-27 14:13:35
I use these clamps on my turbo Acura Integra. These clamps are very heavy duty and substantially more beefy than most vband clamps out in the market. Very thick clamp but easy to get on and tighten. I only use Ticon clamps, they prove to be the most durable and long lasting. You will be very happy with these clamps. Especially in a boosted application.
mike
2025-07-14 10:59:51
As others have stated, be careful with the nut. Mine started seizing as soon as I went to tighten it. I sprayed some penetrating lube on it and it went on smooth. Had I just forced it on I'm sure threads would have been damaged. The part on the clamp that loops and holds the "tee" end of the bolt is a little flimsy. I found myself using my small vise grips to ensure I didn't bend the snot out of those loops while I tightened the nut. We'll see if this nut gives me any grief later on down the road when it comes time to remove. I'm already wondering if replacing it with a lock washer and standard non locking nut may be better.All in all, solid purchase and much better than the cheap v band clamp I had on that was destined to fail at some point
Striball
2025-04-14 13:16:39
Had to sacrifice a v band clamp as it stripped, so this was its replacement. I trust the brand heavily, it’s a good buy.
Matt Walker
2025-03-16 15:54:35
This is a perfect replacement for the turbo/up pipe clamp for my 2002 7.3 powerstroke. If things aren't perfectly lined up, it's a real bear to install, but that is Ford's design problem and not this clamp. The clamp is well made and I expect it will do it's job until my truck is in the junkyard. Do yourself a favor and get a second hand to install.
Lalee Lo
2025-02-10 13:24:44
Don’t buy any other v band clamps except these ones. I bought some off eBay and other off brands. They will not put enough force to keep the connection sealed. Best clamps on the market.
Skip
2025-01-15 17:32:37
Worked excellent. The oem clamp was so tight I couldn't get it back on. This was larger enough that I could slide it over and had enough clamp left that I could tighten it down while blindly installing it.
Joseph T. Smith, Jr.
2024-12-25 15:17:44
Very well made, true to size and an excellent value. The V band clamp is stiff and would had been easer to install if the bolt was a little longer so to start the nut. I am please with it, I used it to replace the missing V band clamp on the diesel turbo charger on my Caterpillar dozer.
Luke
2024-11-29 12:04:52
I bought a 4" Diamond Eye exhaust system , fit very well and wanted to use a new clamp for exhaust manifold connection, this is a very nice quality clamp HOWEVER it is too small by almost an inch of being able to start the threads , I spent 4 hours ( I was an Industrial mechanic for 25 yrs) pulling every trick in my bag out , unless your able to stretch this it wont work, the OEM original made the connection in 15 minutes , SUPER frustrating !!!!!! the rest of the exhaust system was done in an hour , sounds Great and boosted the power !
Recommended Products
