Your cart is empty.
Your cart is empty.Timken 2043 Seal
Jo
2025-07-07 18:35:44
The old seal was leaking, this is a good replacement. It does not leak, I did add a thin coat of Black RTV to make up for any small imperfections since the vehicle is older.
Jason Scott
2025-06-01 11:49:56
Purchased to replace the weeping pinion seal on my '95 GMC Sierra 4x4. Terrific replacement. Once I got the pinion nut off (which required an air-powered impact wrench) swapping the old seal for the new one was a breeze, and cured the leak. Tips: apply a thin coat of sealant around the body of the seal, to seal it tightly to the differential housing; and apply a generous amount of oil or grease to the seal itself (once in place) to prevent it from being dry when you start driving, after completing the repair.
Rene
2025-05-11 15:15:03
Worked for my 1973 Pontiac Ventura
Stephen Wathne
2025-03-07 14:22:06
Fixed the leak
Scott Elkins
2025-01-06 14:24:34
Good seal
AH
2025-01-03 12:55:09
Fit my 1987 Chevrolet v10 (k10) 8.5†10bolt rear pinion. I carefully got it started by hand and used a small piece of 2x4 and a hammer to tap it on.Grease the spring or be careful so you don’t knock the spring on installing.
Recommended Products
