Shopping Cart

Your cart is empty.

Your cart is empty.

Trim Trimmer Potentiometer Assortment RM065, 3296W, 3362P, RM063 all 100Ω 1K 10K 100K 1M 200Ω 2K 20K 200K 500Ω 5K 50K

Free shipping on orders over $29.99

$14.99

$ 7 .99 $7.99

In Stock
  • 182 pcs Trim Trimmer Potentiometer Assortment contains 4 different types
  • RM065 Type: Standard Pot, vertical legs, 13 values, each value 5 pcs
  • 3296W type: Multi-turn Endless Pot, vertical legs, 13 values, each value 2 pcs
  • 3362P type: Modern Pot, vertical legs, SMD dimensions, 13 values, each value 2 pcs
  • RM063 type: Standard Pot, horizontal adjustment, 13 values, each value 5 pcs


65 pcs, 13 values RM065 linear vertical Trim Pots Potentiometer Assortment:
Rated Power: 0.1W, Tolerance: ±20%, Terminal Pitch 5x2.5mm, Body Dimensions: 6.4x7mm, Max Voltage: AC50V
100 Ohm, 5 pcs
1K, 5 pcs
10K, 5 pcs
100K, 5 pcs
1M, 5 pcs
200 Ohm, 5 pcs
2K, 5 pcs
20K, 5 pcs
200K, 5 pcs
500 Ohm, 5 pcs
5K, 5 pcs
50K, 5 pcs
500K, 5 pcs
26 pcs, 13 values 3296W Multiturn Endless vertical Trim Pots Potentiometer Assortment:
Rated Power: 0.5W, Tolerance: ±10%, Terminal Pitch 2.5mm, Body Dimensions: 10x9.5x5mm, Max Voltage: 300V
100 Ohm, 2 pcs
1K, 2 pcs
10K, 2 pcs
100K, 2 pcs
1M, 2 pcs
200 Ohm, 2 pcs
2K, 2 pcs
20K, 2 pcs
200K, 2 pcs
500 Ohm, 2 pcs
5K, 2 pcs
50K, 2 pcs
500K, 2 pcs
26 pcs, 13 values 3362P vertical Trim Pots Potentiometer Assortment:
Rated Power: 0.5W (>50KΩ) 0.25W (
100 Ohm, 2 pcs
1K, 2 pcs
10K, 2 pcs
100K, 2 pcs
1M, 2 pcs
200 Ohm, 2 pcs
2K, 2 pcs
20K, 2 pcs
200K, 2 pcs
500 Ohm, 2 pcs
5K, 2 pcs
50K, 2 pcs
500K, 2 pcs
65 pcs, 13 values RM063 horizontal Trim Pots Potentiometer Assortment:
Rated Power: 0.1W, Tolerance: ±20%, Terminal Pitch 5x2.5mm, Body Dimensions: 7.4x6.5x7x4.4, Max Voltage: AC50V
100 Ohm, 5 pcs
1K, 5 pcs
10K, 5 pcs
100K, 5 pcs
1M, 5 pcs
200 Ohm, 5 pcs
2K, 5 pcs
20K, 5 pcs
200K, 5 pcs
500 Ohm, 5 pcs
5K, 5 pcs
50K, 5 pcs
500K, 5 pcs
B5K, linear taper ....... 3 pcs
C5K, reverse log. taper ..2 pcs
A10K, logarithmic taper .. 2 pcs
B10K, linear taper ....... 3 pcs
C10K, reverse log. taper ..2 pcs
A20K, logarithmic taper .. 2 pcs
B20K, linear taper ....... 3 pcs
C20K, reverse log. taper ..2 pcs
A50K, logarithmic taper .. 2 pcs
B50K, linear taper ....... 3 pcs
C50K, reverse log .taper ..2 pcs
A100K, logarithmic taper .. 2 pcs
B100K, linear taper ....... 3 pcs
C100K, reverse log. taper ..2 pcs
A250K, logarithmic taper .. 2 pcs
B250K, linear taper ....... 3 pcs
C250K, reverse log. taper ..2 pcs
A500K, logarithmic taper .. 2 pcs
B500K, linear taper ....... 3 pcs
C500K, reverse log. taper ..2 pcs
A1M, logarithmic taper .. 2 pcs
B1M, linear taper ....... 3 pcs
C1M, reverse log.taper .. 2 pcs
Nuts, 63 pcs
Washers, 63 pcs
Black Knobs, 10 - 15 pcs


bob amos
2025-01-06 17:35:19
This is one very complete selection. There are 4 plastic segmented boxes with 2 to 5 pots of various size and shapes in each segment. They cover most needed ranges. Adjustments showed that the transition through the ranges were clean. The quality of the pots all looked very nice and were well made and assembled.As a hobbyist I have limited experience with this sort of part but, from my past experiences, these will do most jobs that I will need them for. My expertise has been in the automotive electrical industry so I do have extensive experience with electronics. Would I trust them for production work? Probably not, but that does not mean that they are lacking. Just that I would use something time tested for production work.Each case is smaller than expected being about 4x3 inches across and 3/4 inch deep. Each box is segmented into 12 1"x1" compartments. The lid snaps shut with no clasps. Also included is a small screwdriver for making adjustments. It's not a high quality driver but will do the intended job and a nice touch just the same.Bottom line: These will be a part of my vintage radio hobby parts collection and, if needed, I will now have them at hand.