Your cart is empty.
Your cart is empty.Having the right edge trim can make a huge impact on any project; Trim-Lok manufactures edge trim in a variety of dimensions and edge thicknesses to meet the unique needs of your DIY project. From decorative trim and fire-retardant trim, to sewable upholstery trim and fender flare trim, our edge trim is made for various applications such as van doors, boats, golf carts, helmets, truck cabs, riding mowers, computer cabinets, fiberglass, machinery guards, sheet metal, playground equipment and much more. The extremely flexible neoprene rubber edge trim creates the perfect edge. As you push this edge trim into place, its tight grip holds the edge to keep it secured. The edge trim can be used outdoors and is designed to last against the elements as well as having moderate resistance to oils and gasoline. Materials are medium-hard and sturdy with an 70A durometer rating. If you’re looking for a protected edge with excellent resistance to sunlight, water, and the ozone, look no further than Trim-Lok’s edge trim.
Triplewide
2025-09-03 21:52:04
Used to cover cut edges of molded plastic insert on motor home. Wanted something to "finish" the cut edges that would turn sharp corners at odd angles. This worked perfectly. Seems to grip firmly, if it comes loose over time I may use silicone or adhesive to keep in place. Seems good at this point.
asm154
2025-08-22 17:46:26
Does everything it claims. Easy to use, holds the edge well. Added a bit of loc-tite super glue to keep flat as I was lining a square enclosure and pushing a grommet into it, which caused it to raise up a little against the pressure. End product looked great. Met expectations.
Adam Machanic
2025-08-20 12:34:23
I used this product as a topper for a galvanized steel planter. It is absolutely perfect in that application. Went on easily, stays in place, looks great. I assume it will hold up will over time but I'll come back and comment if that's not the case.Deducting a star because it's really quite pricey. I hope that the product's quality and longevity will prove the value.
Marcus Leonardi
2025-08-12 15:02:51
Excellent product, good quality and easy to work with. I used it seal the edges of my bumper so that the grilles would not damage the paint, and to help keep water and debris from getting trapped where the grilles meet the bumper. It cuts easily with a razorblade, and is flexible enough to wrap around tight rounded corners. Would definately recommend this versatile product!
Jess P.
2025-06-08 13:27:02
Very thin, if you look at it wrong it deformed. Very stretchy, do not cut it to length for a while, as it shrinks tremendously. Zero adhesion!!! A total waste of money, DO NOT BUY IT!!!
Carlos
2025-06-07 15:47:09
I installed aftermarket speakers on the doors of my Cherokee XJ. I used this to cover the jagged edges of hole I cut out to clean it up. Made it look a ton better than without it
Manuela Eldridge
2025-05-05 13:48:08
Will work for what I need, although I thought that it would have a thicker core like the picture shows not a length of rubber tube with a slice down one side.
Roy P. Russell
2025-03-31 14:12:14
I used this trim on the sharp cut edge of a piece of metal roofing that was close enough to the ground that I was concerned people would touch it and cut themselves. It did the trick and has not come off yet
Pat
2025-03-25 21:44:05
Exactement ce que je cherchais pour mes fender flare oem de 2002 gmc sierra. Sa fait tellememt beau dessus et franchement plus beau que d'autre produit qu'on peut mettre. Caoutchouc très souple car mes fender flares font un angle de 90° et le caoutchouc suit l'angle sans problème. Merci beaucoup Amazon
Lyn Chapman
2025-03-17 16:13:13
This rubber molding is refined in appearance and exactly what we needed for our application. The polycarbonate in our application is 1/16" thick. This molding will grip onto an edge that is not subject to being struck where the open edges of molding are on the surface of the material it is pushed onto. In our application, the open edge of the molding was being struck from time to time pushing it off the material it was pushed onto. We addressed this by bending 10 mm wide 3M 300LSE two sided tape (purchased off Amazon) around the edge of the polycarbonate. We then peeled off the backing and pushed the rubber molding onto the edge. The rubber molding is now on the edge of the polycarbonate FOREVER!!!
Mephiskapheles6
2025-03-04 10:09:00
Suited my purpose
R
2025-01-26 20:28:07
I put over sharp edges of very thin 1/4 inch wire mesh called hardware cloth; it fits snug and secure.
JHornak
2024-12-07 17:42:22
The length was more like 20ft instead of 25ft. Left well short for my project. Not worth the $60.
Recommended Products
