Your cart is empty.
Your cart is empty. TRUSTMI Hot and Cold Mixing Toilet Bidet Sprayer
Material: Brass Body, Stainless Steel Sprayer Head
Color: Brushed Nickel
Function: 2 Function Bidet Sprayer Head
Number of Handle: 1
Decorate Plate: 5.27 inch * 2.75 inch
Connector: NPT 1/2 inch
Hose: 47 inch Long, Stainless Steel and PVC+NYLON Inner
Mounting Type: In Wall Mounted
Packing Include:
1 * Complete Bidet Sprayer
1 * Mounting Screw Bag
1 * Specification
Arun A.
2025-09-06 13:18:09
Happy with this product. Been using for about 3 months. Works well.
Jett
2025-07-29 11:25:13
I have had several of these "personal bidets" over the years. They came in really handy during the covid panic buying of toilet paper. The problem was that they were all only hooked up to the cold water coming into the toilet tank. This new one is connected to the hot and cold from the sink. Best thing since indoor toilets! I discovered these in my travels outside the USA and thank God I had the good fortune to discover them. I highly recommend them!
dave_b_quick
2025-06-10 11:59:49
This unit has some nice features. Here on the Canadian border hot water was a must. The temperature/flow adjustment is very simple and easy, similar to the single-lever kitchen faucets. The button on the spray head is great: push once and it stays on until you push it again.Installation was a little tricky in an old house with thicker walls. My wall was 1" thick (metal lath + cement plaster + tile). I didn't realize until after I got it in that it's designed for a thinner wall ( The main thing is my GF is thrilled with it, even without the trim plate. I will definitely install more of these.Note: After one week of service, the plumbing attachments started leaking (see photo). Advice online had led me to use American (NPT male) fittings screwed into the female straight G-thread. I used plenty of pipe dope, and it didn't leak at first. It turns out the main casting cracked where the male NPT elbow screwed into the female BSP hot water inlet (see photo). I tried BSPxNPT adapters, but the cracked casting still leaked even with lots of pipe dope. I finally solved the problem by soldering the adapters into the casting (I took it apart first to avoid overheating the rubber parts). The adapters were hard to find, expensive, and took a week to arrive. I think NPT adapters should be included in units sold in USA. The unit itself is great, and I will install another.
ATMH
2025-05-24 12:17:24
Nice product for what it is. I like the finish. I only wish it was thermostatic; and I would have purchased it for a higher price just for that feature.Anyway, I've read a lot of reviews and most of the questions on Amazon before buying.First of all, this bidet can be installed both in a remodel/new construction and as retrofit. In my case it was a remodel but I opted to install it in a way that works for retrofitting so that way I can replace it if it fails (leaks for example) in the future.To install this bidet in a way that you can easily replace it if it fails you need to have a vanity near the toilet. Drill a couple of holes in the vanity, build a bracket to mount the bidet to it and install it on the inside of the vanity. Install your water supply lines by tapping into the sink water supply lines and you're done. You'll have hot/cold water bidet and without needing to mess with any walls or calling a plumber.Just make sure you do your measurements correctly. Once you drill holes in a vanity you won't be able to patch them if you make a mistake ;). For example, in your measurements account for how long your supply lines need to be to tap into the sink supply (the longest faucet supply line I've found at Home Depot online was 36"). Also keep in mind the bidet handle in your measurements, you don't want it to not have room to hang because you installed your bidet base too close to your vanity top.Make sure to use a thread sealant like RectorSeal and wrap teflon on it for your threaded connections (only on the inside of the vanity, not the nice matte black side where the hose connects to the base and handle)To install the cosmetic cover plate on the outside of your vanity use a double sided tape (like 3M or whatever) and add a bunch of it in strips building it to the proper thickness and just stick the plate to the vanity that way.In addition to buying this bidet I bought another bidet that has a traditional handle (squeeze not a button) that allows you to control the water pressure with your palm as you spray, unlike the one that came with this bidet; yes it is silly to have to buy a whole other bidet just to get the right handle but I couldn't live with the one that comes with this one because it leaves you with no water pressure control except at the base unit and that is just not practical at all. I can therefore confirm that you can install any handle you like on this bidet because it is a standard thread.Finally, as far as your supply lines, you can replace the valves for the sink with ones that have two outs, one goes up to the sink and one goes to the bidet.I'm attaching pictures so that it is clear what I have done to get this installed. The pictures show that the vanity top is off but that's because this is a remodel and the vanity is new, you don't need to remove the top to get this installed.
Sunny
2025-03-18 12:32:49
I purchased this product (3 of them actually - two Brushed Nickel, one bronze) with great hope that it will be the solution we are looking for in terms of temperature control especially. After using it for about a year, this piece had at least 3 issues.1. the holder (for one the sprayers) was placed in the reverse direction so I had to contact the seller and they sent the part (the part arrived more than 30 days later from China). All the time I was waiting for the part, I had to place the sprayer on something else.2. the buttons on almost all sprayers came off. luckily we can tighten it up by rotating the button onto its groove. (not ideal though that we have to keep tightening all the time)3. today the button is not pressable anymore (for one of the sprayers). I removed the button and found out that the switching mechanism has now become soft, so basically the clicking action is not there anymore and we have to replace it with something else or contact the seller again.I don't recommend this sprayer from this company to anyone. Probably look for something else. I really like the sprayers having temperature control, but something that is more reliable. Also if you are trying to install it or fix it, factor in the amount of money you would incur for plumbing, drywall patching and (re)painting.
Cliente
2025-02-26 12:19:11
Producto de muy buena categorÃa total como se describe
Kunde
2025-02-16 16:27:29
Top Qualität
Francois Gauthier
2025-02-01 19:32:43
Easy to install. Do be surprised, this thing has a lot of pressure.
SORIN CIUPERCA
2025-01-26 17:18:11
No bad ðŸ‘
Riyad
2025-01-14 14:47:40
المنتج مصدي
Recommended Products
