Your cart is empty.
Your cart is empty.Attention: Do not order this product if you are not capable of making minor repairs around your home or have some one who can help you. Faucet Grip Two Pack makes round, oval open lattice type and "T" type hose bib handles easy to turn on & off. Attaches to most handles with the included hardware. Important: YOU DO NOT HAVE TO OVER-TIGHTEN THE NUTS. The Faucet Grip is designed to be loose, the nuts just hold the mounting screws inplace. It will still turn your hose bib off and on. Faucet Grips are perfect for impaired hands, small hands, even wet hands. Saves water by preventing dripping faucets because you can turn off the water tightly. Makes a great gift because it is unique, useful and inexpensive. Faucet Grip Two Pack Grips also have two large holes that fit a standard, long handle sprinkler key so that you don't have to bend over or reach through shrubbery. Installs in minutes with just a Phillips screwdriver. Faucet Grips fits your existing lattice-work and "T"handles but review your handles before ordering to make sure they are like the handles in the pictiure on the package. Will not work on solid,freeze proof handles without drilling holes for the screws. There should be 2.5 inches of clearance from the center of your handle to any wall or other obstruction. For more clearance, Faucet Grip can be trimmed shorter with a saw or sander. Please be advised that the Rufus A I "Answers" only reflect negative comments by a few of the 175,000 people who have purchased Faucet Grips. If you don't like them you can return them for a full refund. If you have a problem you can find visit our website for help.
Customer
2025-07-22 17:01:47
This item works great, especially for older hands like mine. I installed them on two different existing handle styles. One fit perfectly. The other took a little adjusting. Both work great.
KRC
2025-07-20 19:59:15
DO NOT BUY THIS CRAP.I have a very standard T shaped knobs and these handles barely cover the knob ends adequately.Worse still, the mounting hardware provided is ridiculously and shockingly small and cheap, as well as insufficient for the job. The assembly instructions say you only need two screws to mount the handle but this is quite clearly and obviously not true. I felt downright insulted when I saw the product installed as directed because it was like they were lying to my face. I found that with four screws it works okay, but the nuts are made of weak plastic that won't last. I monkey-rigged mine to work with stuff I had laying around the shop but not everyone is going to be so lucky.This reeks of a cost-cutting move by some unqualified CEO that needs to be jailed for being a scamming slimeball. I cannot imagine even the most incompetent engineer approving such a design. If two more screws and all-metal hardware were provided I would have little to complain about.WHAT A SHAM!!!
lousy they don’t fit my faucets
2025-05-22 16:03:41
Dislike they do not fit my faucets so they are useless!
Evelyn B.
2025-04-13 14:53:20
So comfortable and makes turning on and off so easy.
Anders J Nereim
2025-04-05 16:11:11
This product works, but only if you overcome two design and production flaws:1. The grip does not fit neatly around a standard American 8 sided faucet grip, but instead is smaller and slides around on top of the standard grip, placing the two bolts under strain they were not designed to withstand.2. The machine screws that come with the kit have soft nylon nuts that will strip quickly when the grip slides around as noted in point 1. The machine screws have a slightly larger diameter than a standard American 4-40 but finer thread pitch. I would guess they are metric and I saw no reason to waste time try to find a matching bolt and washer at a big box store.Solution:Do yourself a favor and buy two 8-32 x 1.25" machine screws and nuts, and use them instead.Then and only then will the product will be a pleasure to use,
Sue
2025-03-28 19:27:53
I have arthritis and this makes it so easy to turn on my outside faucet. The screws were not long enough to attach to the existing handle but I had longer ones and metal nuts, not the plastic ones included. Installed easy after that
S. Monroe
2025-01-19 18:42:27
Missing some nuts, very small nuts and bolts. Even though there are a lot of holes, we couldn’t find a suitable position to bolt onto spigot handle. It’s a good idea but poorly designed. I think the price is also too high, but there wasn’t any other option. Returned.
WILL SCHUMACHER
2025-01-17 16:46:36
Original handle is broken on outer rim and is difficult to turn, also it is seized to valve shaft and cannot be replaced. This additional handle showed promise, however:1. Holes in this new handle do not match up with original handle holes. Will need to install off-center.2. Plastic nuts are too small for the handle holes. I will need to find some metal washers.3. I’m not confident that the plastic nuts and skinny screws will be strong enough to last long.
Recommended Products
$15.99
$ 7 .99 $7.99