Shopping Cart

Your cart is empty.

Your cart is empty.

Tyger Auto 3.5' Rider Running Boards Compatible with 2009-2018 Dodge Ram 1500; 2010-2024 2500 3500; 2019-2024 Classic | Crew Cab | TG-SS2D35318 | Side Step Rail Nerf Bars

Free shipping on orders over $29.99

$179.00

$ 70 .99 $70.99

In Stock

1.Color:Textured Black


2.:Crew Cab


About this item

  • FITMENT - Compatible with 2009-2018 Dodge Ram 1500; 2010-2023 2500 3500; 2019-2023 Classic | Crew Cab [Cab Size Note: Only fit Crew Cab with 4 full-size doors. Not for Quad Cab or Mega Cab. (See Image for more info)] | Will not fit 5th Gen 2019-UP Ram 1500 New Body Style
  • OVAL TUBE DESIGN - Distinctive oval tube design of these nerf bars provides a wider 3.5 inch step pad surface than their single round tube counterparts. Bigger step pad's non-slip surface = Greater Stability.
  • SEAMLESS CONSTRUCTION - Seamless, end to end, full body E-coating heavy textured powder finish keeps all the dirt and water away while providing superior rust and corrosion protection. At the same time, the textured finish enables these simple and clean side steps to retain their rugged off-road appearance.
  • WHAT'S INCLUDED FOR EASY INSTALLATION - Includes both driver and passenger side running boards. | Includes all hardware and brackets required to mount onto the rocker panel. | Easy bolt-on installation. | Installation can easily be done in 20 minutes. | For 2009-2011 and some 2012 models, it requires minor drilling of 1/4'' holes through the pinch weld for support brackets.
  • QUALITY GUARANTEED - TYGER offers a no-hassle 5 year warranty for US customers against manufacturing defects.



Product Description

TYGER Rider

VEHICLE COMPATIBILITY

  • Cab Size: Crew Cab. Only fit Crew Cab with 4 full-size doors. Not for Quad Cab or Mega Cab. (See Image for more info)
  • Compatible with 2009-2018 Dodge Ram 1500
  • Compatible with 2010-2024 Ram 2500 3500
  • Compatible with 2019-2024 Classic
  • Not Compatible with 5th Gen 2019-UP Ram 1500 New Body Style
Fitment
  • Yes, the package comes with all the brackets & hardware needed to mount to the body panel.

  • Tyger Rider have a weight capacity of up to 300 lbs on each side and they are not height-adjustable.

  • Tyger Rider are made of carbon steel tube with a powdered E-coating finish.

  • Before ordering, confirm the correct CAB size of your truck with your car dealer. To avoid unnecessary returns, make sure the year and model is correct.

  • To prevent corrosion, avoid using wax on the running boards. Clean them regularly with regular soap & water or just water. Make sure to clean them more frequently during winter or snowy conditions.

Brackets
TYGER Rider Ending Image

TexasAg37
2025-08-20 14:43:31
Material is nice. These Fit my Tradesman Classic RAM 1500 Crew Cab beautifully. Fairly easy to install with assistance. They hug the body tightly so if you are looking for a big step, probably not what you are looking for. Value for money spent was good.
William
2025-08-11 15:27:55
Looks good, easy install. Packaging was excellent and protected product well, instructions were good. Helpful hints from other reviews helped in the install: Clean off paint from studs before threading nuts on studs and put together loosely before tightening everything. They seem really well made, sturdy, and the powder coating looks like it will last. I rarely give 5 stars to anything but the price and quality of these rate it.
Daniel & Tracey Fimbres
2025-07-30 13:39:59
You need to understand the instructions and plan out the install. No mechanical skills needed and very few tools required. Only took about an hour and a half from start to finish to install. They fit the vehicle perfect and look great. Can't imagine spending more or paying to have them installed.
Matt
2025-07-01 13:16:33
Instructions are a little confusing as they are trying to address multiple configurations in one set. Best advice I can give is to install everything loose and install and remove the running board itself multiple times to get everything to line up right.I like it once I got it in place. Well made.
Not So Old Man
2025-06-10 11:59:52
Just imagine "fat old guy with bad knees" trying to get into a truck without these. If you can do that, I'd say that was me. I purchased these and installed them. The directions were easy to read and the process went quick. Less than an hr. and my whole life got easier. No drilling, attachment locations were already in truck.
Bob S.
2025-04-30 15:05:40
I have a 2019 RAM 1500 Classic (Old body style) and these running boards fit perfect. I found the directions to be very good, you just have to read them and pay attention. My truck already had threaded holes from the factory for both front brackets. They were very rusted, and I could not get the bolts to thread in until I ran a tap through them. Once I did that, I had no problem. All of the main brackets have letters stamped on them. Just line them up with the diagram in the directions and you can't go wrong. I was looking for running boards that were not tremendous and these fit the bill. Tyger makes quality equipment. Thay match my front push bar and rear hitch mount step perfectly. All of them are heavy duty.
Bill
2025-04-27 12:03:22
I am beyond thrilled with these running boards! Installation was a breeze, and I wrapped it up in about three hours. Okay, one of those hours was spent making sure all my tools were out, all parts were accounted for and organized, and reading the directions. Directions were well written. A bonus at the end was the ease in which you can take the stickers off the parts. The look great and feel very sturdy.
Kyle Bunch
2025-04-17 16:21:38
I have a 2017 quad cab , bracket placement doesn't match running board bolt placement, way out of line. Not even close to be able to adjust ...... Not sure how that happens when it is advertise for this vehical or they sent me the wrong items , either way I seen someone els also had this issue.
Dan Rochon
2025-03-20 13:58:16
Prenez le temps de lire les instructions et comprendre quelles “bracquet” vas ou. Un peu de confusion à savoir quelle “bracquet” à installée et ou.
Terry S.
2025-02-28 14:06:10
Very happy with my new steps. Love the black crinkled finish on my lifted black Ram and it seems extremely durable. Directions were straight forward and easy to follow so installation isn't hard if you're handy. Two hours and they were on. They're super solid and handle my 200lbs no problem. Would highly recommend.
Meo
2025-02-16 16:11:13
Easy to install and great looking
Customer
2025-02-08 17:18:33
J’ai du couper les 6 braquettes et les rallonger de 1-1/2" . Car d’origine vraiment trop près du body
J Coulter
2025-01-30 10:59:18
I like the different texture. Step is a little narrower which gives a sleek look and enough size to do what it's supposed to.
Recommended Products