Your cart is empty.
Your cart is empty.Product Description
- Provides ultimate brute strength for disassembling even the most seized u-joints in minutes on virtually all class 1-2 cars, light-duty trucks and farm machinery. (Compatible with Ford F-150/350, Chevrolet 1500/3500, Ram 1500/3500, etc.)
- Used with up to a 1/2 inch impact wrench and work with U-Joint bearing cups from 1” to 1.25” O.D.
Upgrade Design
- Provides the most effective mechanical advantage for easy disassembly.
- Reduces risk of damage to the driveshaft, yokes, joints or bearing caps.
- Eliminates dangerous vice and socket, or hammering methods. Removes sealed u-joint cups in minutes.
Superior Quality
- Premium grade heavy duty carbon steel with black anodized finish
- Superior durability and strength
- Anti-corrosion and anti-rust
- Anti-impact, anti-deformation
Special Features
- Manufactured to OEM specifications
- The greatest and original U-Joint Puller.
- High precision and toughness to provide a much longer service life.
STEP 1
Remove all fasteners from bearing cups.
STEP 2
Slip the U-Joint Puller over the yoke of the driveline.
STEP 3
Turn the tool's forcing screw clockwise with either an air or and wrench. (Note: reverse thread)
STEP 4
Once bearing cup has been removed, repeat the process on the remaining bearing cups.
S. W. Heard
2025-07-20 12:54:14
I used this to change the u-joints on my Jeep TJ. It worked great. It made short work of the u joint change. No beating and banging to get the u joint. I know some of the reviews complain about the quality, maybe they've fixed that issue. Because I used an impact wrench on mine with no problems.
Mike
2025-07-11 21:21:58
I bought this too more safely remove the u joints (instead of the manual hammer and socket method I’ve done in the past). The tool is coated in a smooth finish and will absolutely not grip onto the u joint. I tried everything I could think of to keep it from slipping off. Finally resorted to the hammer method and have removed one joint with little trouble. Absolute waste of money.
DRAGON
2025-05-03 10:26:28
The product is not worth buying. It broke when I used the impact wrench to tighten the bolt to remove the old universal joint on my Toyota Tacoma drive shaft.The material needs to be more durable and stronger because the threading on the bolt stripped off when it was being tightened.
DJwhiteRob
2025-04-20 15:21:44
This was small for my application. I purchases the middle size. I used this for front axle u joints 2001 dodge ram 2500-too small
john g.
2025-04-18 10:59:49
First time use and tool broke. 1/2 inch sized hex end easily rounded with any pressure. 6 point socket worked well but the ears holding onto the driveshaft bent on first use. Waste of time and money.
Ronald shambach
2025-02-15 13:06:23
works well didn’t break like this and price affordable
Dave Chester
2024-12-12 15:40:35
Hey it's better than using a hammer and socket. It saves the hands from getting smashed all to hell as well. I used it for 2 u-joints on my Tacoma. Got them removed and replaced, truck back in service. At the end, the last cap, it was beginning to slip, and the collar that holds it in place so you have pulling leverage, it had opened up just enough to allow it to slip off under pressure. Blame that on the grade of metal it's made from. All in all, it's better than how I've had to remove u-joints in the past. Saves a lot of time.
N/A
2024-12-03 11:52:51
After removing 3 u joints the “glove†portion of the tool was worn where it clamps the yoke and the area the threaded rod goes into the glove started to produce metal shavings. If only needed for one u joint good product. Only writing review because there’s no way to get product support other than automated “troubleshootingâ€
Recommended Products