Your cart is empty.
Your cart is empty.Ueteto Wireless In Ear Monitor System，2.4GHz Stereo IEM System with Transmitter Beltpack Receiver, Plug and Play for Musicians， Studio, Band Rehearsal, Live Performance
Dave Daves Seaward
2025-08-12 12:07:23
I find it odd that a headphones system would be mono - but if you're using it for in-ear-monitoring (IEM) there's no need for stereo and sometimes IEMs are worn in just one ear. The input being a male 1/4" TS jack (technical name is "phone" connector) is inappropriate, however, and may cause damage to users' gear because if this product is to extend a headphones output cue, that's always a stereo TRS connection (whether 1/4" or the minijack 1/8") - nobody has mono headphones anymore, so the headphone jacks are always meant to work with a stereo TRS. As noted by Tascam, when you plug a TS into a TRS powered headphone amplifier output there is a risk that it'll short out because the second channel can't connect electrically. Fortunatley a lot of modern gear is designed in such a way that it won't break - but you're still going to be missing half of your audio signal! Modern audio interfaces, computers, devices don't support mono output typically so designing it this way was a poor choice; if for cost or some other reason it was necessary to do just the one mono channel this could've been implemented OK with a TRS stereo connector for input that would simply be wired to combine both channels to a mono signal to be transmitted wirelessly. Moreover, why are they using the larger 1/4" size phone jack for the input? Consumer devices have all been using 1/8" (3.5mm) minijacks for decades now, only pro audio feeds would use the larger 1/4" connector - and those would be TRS stereo 1/4". However, the manual depicts a mixer as the output source (where the reciever connects to get the sound) and for that application this is an apt design, impressive how cheaply they pulled it off. I just doubt that most potential buyers will realize this.In use it works right out of the box. I'm not hearing obvious audio degradation, a great sign. cause they can hear the level!).
GSP
2025-07-15 18:11:24
I ordered this wireless transmitter/receiver to use as a monitoring system. I intended to plug the transmitter into one of the monitor outputs on my mixer and use the receiver with a pair of earbuds. Testing out this set-up worked perfectly. However, I quickly realized that's not all this thing can be used for!You can easily set this up as a wireless guitar system by plugging the transmitter into your guitar and hooking up the receiver to an amp or mixer using a small 1/8" cable (on one end) to a 1/4" (on the other end). Pretty cool!Unlike many of the wireless systems I've used, this transmitter and receiver both have battery power indicators, showing how much charge is left on the device! This is something many of the units I've used in the past have NOT had, and it is a fantastic feature! Now I can easily tell how much power I have left during a performance (or if I've forgotten to charge them up).The units are quiet and have a great range. I tested transmitting some music from my pc and used the receiver with some headphones and walked the entire length of my house - no drop outs or degradation in the sound. They are both incredibly light. They come with a dual charger so you only need one "wall block" with a USB A port and you can charge both units simultaneously.The bottom line:I really like this wireless system! It's well-made and should serve me well. I highly recommend!
Matt
2025-04-08 13:19:40
This is a pretty unimpressive in ear monitor system. Where it falls short most:1. The clip on the receiver has no spring, it's just the tension of the plastic, so that will eventually snap.2. The transmitter or receiver add in some white noise/hiss. This may be due to 16-bit audio or just poor 2.4ghz connection. I tried all 4 channels and no difference.3. Range isn't great, though thankfully accurately advertised at 20 meters. I got only about 8-10 meters semi obstructed. Unobstructed is key to getting the full range.The unit charges nicely via USB-C. Setup to get going is simple as it easily switch and pairs between channels. Wish the range were more useable and the audio quality a bit better (less white noise). This is certainly a useable system, but you should get more for $40...
Eddie Rattlehead
2024-12-31 15:44:06
If you're a musician looking for an affordable in-ear monitor setup, this wireless system is worth checking out. It runs on a 2.4GHz signal and is super easy to set up—just plug it in and go. The mono audio is clear enough for rehearsals, and live gigs. The belt pack is lightweight and easy to wear, so it won’t get in your way. Sound quality is solid for the price, though the range isn’t the best for bigger stages, and you might get the occasional signal hiccup. But for the money, it’s a reliable pick that gets the job done.
ikies
2024-12-29 14:07:40
This is truly a plug and Play device that is excellent for interfacing with your sound system. I use this mainly at church when I am running the sound for the sermon. There are very few receivers like this out there that actually have the 1/4-in TRS Male connector included, I'm glad to find one like this that had it on the hardware itself so that you never lose it. The sound quality overall is fantastic, with very little latency, Even plugging into Old analog equipment delivers quite a bit of performance. This is an incredibly valuable piece of equipment for musicians, comedians, soundman, preachers, especially since it can be charged very quickly. Overall the functionality and configuration options accommodate different types of inputs and outputs. So if you are using an 3.5 aux cable, or another 2.4 GHz frequency this thing can be configured to accommodate.
Recommended Products
