Your cart is empty.
Your cart is empty.Width (in) 7" Length (in) 22" Wrap Material Aluminized Backed Thermal Fiber Wrap Color White underside Temperature Rating (degrees F) 2000 degree Fahrenheit Instillation Stainless Ties Quantity of ties included 2 23" stainless ties Thickness (in) 1/8 (.13 in) Quantity 1 mat High performance applications get hot... So we here at Thermal Zero designed a universal starter shield that will protect your starter (whatever size it may be, big small or somewhere in between) that sits close to your exhaust or any other heat source. Our high temp heat shield with protect any starter from a source of heat that could cause premature internal starter failure. Thermal Zero insulation utilizes our own thermal technology to provide superior protection from heat that may exit the exhaust pipe. They lower engine bay temperatures and help to create more horsepower. Our wrap can withstand temperatures of up 2000 degrees Fahrenheit. The wraps provide great protection for motorcycle pipes, while also creating that old school look. Our wraps contain NO ASBESTOS. And each of our different kinds of Thermal Zero Heat Wraps, Aluminized Shields and Turbo Beanies or Shields have been dynamometer tested, by us, in our own shop with our own dyno. So we know the product we are selling is the most premium and best heat insulation products available on the market.
David Wallace
2025-07-31 19:01:30
Worked great. Just what I needed it to do
Grew
2025-07-29 21:33:47
I have an old Land Rover and a new starter motor was put in. It wasn’t OEM and the starter would get heat soaked if the car was driven for more than 30 minutes and wouldn’t start. Instead of spending $250 or more on an OEM starter I tried this heat reflecting blanket.It cut to size easily. Make sure you have the battery unplugged as the metal on the outside of the blanket can cause the starter to spark.After putting it on and attaching the metal zip ties I haven’t had an issue with the starter motor. This saved me a bunch of money and I am happy I bought it.
Tango Tann
2025-07-28 15:39:13
Used it on the starter of my 350sb, where the downpipe from the manifold was about 3/16" from the solenoid.I just replaced the starter because of what I believed to be getting too hot and getting heat soaked after trips 15-20 min long in my '72 C10, it would crank a while before starting. After putting this on, actually went for a 45 min drive each way and the damn thing cranked right up. Maybe it's working! So far, so good. I'll update if anything changes.The fit was ok. I had to cut about 1 1/2" off to get it to fit between the cover and wires. Took about 10 min to install without dropping the starter.The quality seemed pretty good. I used a lighter to try to singe the freys on the edges and it wouldn't melt. Time will tell.
Jonathan Delarosa
2025-07-18 19:28:18
Had decided to purchase this product after some embarrassing mishaps of forgetting to leave car running while getting gas so as to get home from work at a reasonable time, but when the car was shut off it would take around 30 minutes for the starter to cool and have enough power to start the car again. Arrived a day early was fairly easy to install but should come with a few simple directions likeDisconnect negative power cable, the ties only operate once and list of possible tools needed.After getting installed I decided to test drive vehicle to neighboring gas station and with a little bit of doubt I turned the car off and low and behold the car started after all lights came on and I finally cranked the engine excited so that way when I get gas I can shut car off and still get in and know the car will start. Will buy again if needed.
Mikec
2025-06-10 18:23:14
I have a Ford Mustang GT. I added long tube headers. This protects my starter from heat soak and it is the best cheap insurance you could put on your car easy and the bands are perfect.
Paul allen
2025-05-14 19:46:02
Improved heat reduction, not perfect but not expensive either.
Gene McKinney
2025-04-06 15:48:49
This wrap worked great and was pretty easy to install. I would definitely buy one again
Misty
2025-03-08 12:54:07
It is what I wanted and I got before I was supposed to
kevin
2025-03-04 16:20:52
Great product for the price 👌
lynn shellard
2024-12-27 16:12:07
Good quality with 2 ties. Fitted with out taking starter motor off.Hopefully should make a difference.
langtonian
2024-12-05 21:17:48
Product functions as described, delivery of item was punctual
Amanda MacKinley
2024-11-28 11:00:44
For hubbys hobby truck. He likes it.
Recommended Products
$12.99
$ 6 .99 $6.99