Shopping Cart

Your cart is empty.

Your cart is empty.

Upgrade Mechanical Door Lock with Adjustable Deadlatch 2-3/8'' and 2-3/4'',Outdoor Keyless Gate Lock with Handle, Waterproof Mechanical Keypad Door Lock (Silver)

Free shipping on orders over $29.99

$59.99

$ 26 .99 $26.99

In Stock

1.Color:Black


About this item

  • 【Applicable Size】:★Important Note:The maximum pre drilled hole size that the mechanical door lock can cover is 1.9 inches, which is not suitable for the US standard of 2 1/8 inch pre drilled holes. The mechanical door lock is suitable for indoor and outdoor doors with a thickness of 1.38 inches to 2.56 inches (35mm to 65mm). The direction of the handle can be adjusted left and right.▶If your door has pre-cut holes, please check that our locks are sized to cover the pre-cut holes.If you don't want to drill holes on the door, You can purchase a GB2020 gate lock box to install the lock.
  • 【Revolutionary Upgrade】:A completely new upgrade! This is a revolutionary change. You can change the password directly on the panel without having to disassemble the lock. Avoid the complicated process of disassembling and installing the lock to prevent forgetting the password. This upgrade greatly improves the previously less-than-ideal situation when using a outdoor keyless gate lock and brings you lasting convenience.Reminder: Duplicate numbers cannot be set in the password. The correct unlocking method: 1. Press the C key to reset before entering the password. 2. Then enter the correct password. 3. Press the joystick to unlock.
  • 【 2-3/8'' and 2-3/4'' Adjustable Deadlatch】:We offer adjustable deadlatch for 2-3/8 in and 2-3/4 in, which can be adjusted to 2-3/8 in or 2-3/4 in according to your needs to meet different needs.
  • 【More Durable and Waterproof 】Stainless steel mechanical keyless entry door lock is made of high quality zinc alloy material, matte anticorrosive surface treatment is not only beautiful, waterproof, sun protection, rust performance is also greatly superior to other materials, can be used for outdoor or wet places.
  • 【Password Setting and Unlock 】: Reminder: Duplicate numbers cannot be set in the password. The correct unlocking method: 1. Press the C key to reset before entering the password. 2. Then enter the correct password. 3. Press the joystick to unlock.
  • 【Comprehensive After-sales Service】: If there is a problem with the latch/lock tongue you can watch the “Handling of latch Issues ”video first.What you have purchased is not just a product, but also our complete after-sales service: you trust me, I will give you a satisfactory experience. If you are not satisfied, we will solve the problems you encounter.



Product Description

  • Be careful:The maximum pre drilled hole size that the mechanical door lock can cover is 1.9 inches, which is not suitable for the US standard of 2 1/8 inch pre drilled holes.

  • The specific operation is to first enter the door opening password, and then press the "Y" and "C" keys simultaneously to cancel the password. (Note that there is no need to twist the handle during the process) .

  • First, cancel the password (there are steps in question 2). Then hold down the “Y ”key, enter the new password “C+other numbers”, release the“Y” key, pull down the handle (unlock action), and complete the setting of the new password.

  • The reason may be that the two panels of the lock are asymmetric, or that the two panels of the lock are not on the same horizontal plane as the center of the lock tongue. You can refer to the video "Handling of latch Issues".

  • There is a screw at the bottom of the square hole inside the lock panel. Loosen the screw to remove and adjust the handle. After adjustment, tighten it again.

Mechanical Door Lock
Mechanical Door Lock
Mechanical Door Lock
Mechanical Door Lock
Mechanical Door Lock
Mechanical Door Lock

Richard Worthington
2025-08-31 09:15:40
Great replacement for our front gate. Only downside is you can’t disable lock.
bruce
2025-08-09 12:22:02
This is difficult to install and set up. There is a thick bar you need to cut to the correct length for installation. You'll need a hacksaw and vise to hold it while you cut it.There are no instructions on how to change the alignment of handle, this needs to be done for best usage after install.My unit came open and disorganized
Minhnix
2025-07-22 11:47:20
Product works as advertised however it needs a bit of handyman work. #1- Cutting the steel core rod to match depth of door #2- We need to cover existing bore hole with additional 3rd party hardware plates for very low cost #3- Handle orientation can be changed but instructions not clear.Cover plates:Prime-Line U 9515 Steel Door Hole Cover Plate, Gray (Single Pack) https://a.co/d/dRnaJu4
Barry W
2025-06-11 10:55:38
It's a nice lock. It works. It's durable. It's easy to change the combo. And best of all, no batteries. I'll be ordering more for when I get new orders for wrought iron gates.
Sharon
2025-06-08 12:43:14
I needed a digital lock on my outdoor gate. Very difficult to find. This looks good and works
matt
2025-05-22 14:41:44
Does not have a "leave unlocked feature" like similar products. You have to put in the code every time you use the door.
Loyal S.
2025-05-17 16:38:49
I’ve tried to get this lock to work for the last six months on my off grid cabin and while I like the idea I’ve had to replace it twice once due to the keypad and once due to the latch. I finally decided it isn’t worth messing with it any longer and I’m not one to write reviews but I wouldn’t buy this thing again
Customer
2025-05-06 18:14:07
Lock works well. Had to watch the install video a few times to figure out how to move the handle to the correct position and to install correctly. This is the 2nd handle I bought for 2 different outdoor gates. The first is 4 months old and is handling the outdoor weather well. Nice that no batteries are needed. Great item for the price.
Pascal Savoie
2025-04-04 16:37:14
Fabuleux
Elias
2025-01-25 15:41:45
El producto venía en mal estado va con partes oxidadas.
Recommended Products