Shopping Cart

Your cart is empty.

Your cart is empty.

USB to RS232 Serial Adapter, USB Mini 5 Pin Male to DB9 9 Pin Female Serial Converter Cable 1.8M/6Feet (Mini USB to RS232 Serial)

Free shipping on orders over $29.99

$8.88

$ 3 .99 $3.99

In Stock

1.Color:Left Angle Mini Usb To Rs232 Serial


About this item

  • Connector 1: USB mini 5 pin male, Connector 2: DB9 Female Serial Port.
  • The Serial Cable Suitable for connecting computers and various serial devices, such as cash registers, printers, access control systems, scanners, barcode printers, LED displays,Port device connected to USB Mini 5 Pin
  • Cable Made of PVC special grade to ensure signal data transmission,Fully shielded to prevent unwanted EMI/RFI interference.
  • DB9 9 Pin Female to USB mini 5 Pin Male Serial Cable. Suitable for multiple systems Windows 10, 8.1, 8, 7, Vista, XP, Linux and Mac OS X, macOS, (NOTE: That this model does not contain a chip, it is just an adapter cable)
  • Packag content: 1 * 1.8M/6Feet mini USB to DB9 Serial Cable


MTUERANC USB to RS232 Serial Adapter, USB Mini 5 Pin Male to DB9 9 Pin Female Serial Converter Cable 1.8M/6Feet


Paul1114
2025-08-26 16:00:17
Works perfectly with my ICX 7250-48P, but note that this is only half of what you need. You need a USB to serial (DB9 COM) cable with the proper circuitry, and you connect *that* to this cable. USB from the serial cable goes to your PC, and mini USB from this cable goes to your switch. The mini USB port on brocade switches is *not* USB, it just uses the same physical connector, so this double cable solution (or a more expensive single purpose-made cable with the proper chip) is necessary.
Greg
2025-08-19 16:06:15
Works great with the serial console on the Brocade ICX7250. Presents a female DCE DB9 interface. I use a StarTech GC98MF (DB9M to RJ45F) adapter to connect a standard Cisco-compatible RJ45 console cable to the MTUERANC's DB9F port.StarTech GC98MF (DB9M to RJ45F) adapter is wired as follows:DB9 (M DTE) -- RJ458 -- CTS -- 1 (blue)6 -- DSR -- 2 (orange)2 -- RXD -- 3 (black)NC -- GND -- 4 (red)5 -- GND -- 5 (green)3 -- TXD -- 6 (yellow)4 -- DTR -- 7 (brown)7 -- RTS -- 8 (white)RJ45 pins 4 and 5 are both signal ground; only one needs to be connected. The Brocade doesn't need the hardware handshake signals, but I connected them anyway.
Digital Spaceport
2025-08-17 17:56:25
Not really this cables fault, but just FYI this will not work for the NetApp DE5600 or DE6600 series infiniband or fiber channel EMMs. Also that would apply to the MD3060 possibly if they have an IB/FC option as well.
Kevin Wrinn
2025-07-24 15:50:20
Needed for my Brocade ICX 7450 switch. Works perfect.
Lt. Data
2025-04-28 13:12:14
Tried it on a Brocade ICX 7250, nothing. Tried a different Brocade console cable, worked fine, so cable isn't wired correctly. Returning it.
Godxilla
2025-04-25 16:26:13
Did not work for me. I wanted to hook my Garmin 64. To my home patrol 2 scanner. The scanner doesn’t recognize the GPS unit.
AR Family
2025-01-11 18:33:02
Was like $9 USD and works just great. Don't forget you will still need an RS-232 on your computer or a USB-RS232 converter in addition to this cable.
Kent
2024-12-26 12:06:10
This works with brocade switches.
Ömer
2024-11-15 18:06:03
Broade 65xx için aldım. Sorunsuz çalıştı
Recommended Products