Your cart is empty.
Your cart is empty.Product Description
Easy Operation:
Step 1: Solder the IC socket to the PCB circuit board.
Step 2: Insert the chip into the IC socket, finish.
The IC socket is the carrier between the chip and the PCB circuit board, the chip can be pulled and inserted directly without soldering to the PCB board.
Noted:
The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Advantage:
When you need to install or replace the chip, directly remove the connection between the IC socket and chip, achieving the effect of saving IC cost and time.
Feature:
Great electronic component for PCB board, IC socket has strong heat resistance, it can withstand repeated welding and disassembly without damaging the chip.
Danh Trinh
2025-07-10 19:07:11
Fast shipping. No surprises, connector quality fine.
Goat Lee
2025-06-21 10:50:55
Accepts the mill max 3320 gold plated pins perfectly to make your pro micro hot swappable.
David K
2025-06-20 13:35:23
Works pretty well, make sure your device has cylindrical pins.
Benjamin C Williamson
2025-05-11 20:44:02
I had already soldered the included pins on one of the micro controllers I have, so I couldn't use it with that one as the pins were too large. Worked great on another one I had on which I used leftover diode legs soldered to the controller, which fit in the socket adapter great.The sockets came well packages in a thick plastic protector, no sockets were damaged, all pins were perfectly straight.
Nathan Christensen
2025-03-17 15:55:59
It works very well for socketing microcontrollers like the Pro-micro, Nice!nano, or other alternatives. If you plan on using this for a mechanical keyboard, take note that you'll need to clip one of the support braces on the end with some flush or diagonal cutters to fit the port downward like in the picture. Overall, really easy to work with and will get some more in the future.
Erin
2025-03-09 10:19:15
Used to double up to a 48pin socket. Worked perfectly!
GProo
2025-01-26 12:37:01
Gir it
Placeholder
2024-12-20 11:54:15
Every single one had pins broken off, bent, or both. Two of the ten were 28 pin not 24. If at all possible order from elsewhere.
Recommended Products