Your cart is empty.
Your cart is empty.Product Description
According to the needs of wiring in the circuit, you can choose a few knives and several gears to use
APPLICATION
Widely used on radio, radio cassette recorders, various instruments and meters, TV, LED home lights, industrial machine control unit, or other electronic devices.
It's still a great versatile switch for applications involving multiple inputs and outputs.
What You Get - Also available 2 Pole 4 position, 2 Pole 6 position, 1 Pole 4 position, 1 Pole 6 position, 1 Pole 8 position, 2 Pole 5 position, 2 Pole 3 position, 3 Pole 3 position, 3 Pole 4 position, 4 Pole 5 position, 4 Pole 4 position, etc.
Band switch, also called multi-pole multi-throw switch.
Comes with mounting nut and black plastic knob, no worry about knob size mismatching.
Epoxy glass cloth rubber sheet is used as the insulating collective, adopting the cut-in bite contact structure
It is generally a multi-level multi-position switch, and its various contact pieces are fixed on an insulating substrate.
1 Pole 7 Position design, without knob
1 Pole 10 Position design, with flat knob
2 Pole 5 Position design, with round plastic knob
Lee M.
2025-08-30 15:54:12
The switch was exactly as described and good quality.
Paul G.
2025-07-04 15:06:44
This switch is good value for lower current duty. My needs are for very low leakage--sub picoamp--between the switch contacts. The ceramic wafer provides that. Have measured less than 1nA of leakage, this is the limit of my present setup.The construction is reasonable for this price point. The sliding contact sandwiches the stationary switch contacts which is ok for low currents. The turning force is reasonable with positive detents. Another reviewer complained that the knob slipped when turning. You have to tighten the setscrew hard to prevent that, the flat on the shaft is there to exactly prevent slippage. On mine I replaced the 3mm setscrew with a hex head screw which allows positive torquing down.A drawback is that the mounting of the switch on a panel does not positively lock it to prevent the switch body from rotating due to applied turning force. As a reviewer wrote previously, one can reverse the two assembly screws to have them attach to the front panel for more secure mounting.This is a reasonable component at the price point. It is not as heavy duty as a 50 to 100 dollar unit from the big manufacturers like Stackpole, but will work for a lot of applications.
Charles R. MacCluer
2025-06-25 13:04:11
Used for an amplifier band switch. The ceramics and terminals are first rate. The rotary action is smooth. Recommended.
TechUser
2025-06-07 15:06:20
This switch is of very low quality and broke even before I could install it.
k jones
2025-06-02 12:51:42
Not the poor Radio Shack quality. Very good.
ZUES SOTA
2025-03-31 10:14:35
I purchased this switch because I wanted this style knob. Stinks, because knob doesn't fit the shaft.
trevor laurin
2025-03-07 15:24:52
was what I expected
Terry A Levell
2025-01-03 11:28:31
It woks for me
H. Adams
2024-12-25 20:02:33
No anti-rotation lug. If the nut loosens, the whole switch rotates. Reverse one, or both, of the long bolts to overcome this.
Recommended Products
$839.95
$ 99 .00 $99.00