Your cart is empty.
Your cart is empty.1.8mm Bore Diameter KFL08 Pillow Block Bearing Rhombic Flange. 2.Zinc Alloy Rhombic Flanged Base, rust-proof, durable, have long Life. 3.This Bearing is a self-aligning, pillow block bearing, you can adjust or replace the bearing easily. 4.Pillow Block Bearing Flange Block Bearing is widely used in various of machinery, especially in food machine. 5.They also can be used into machinery, convey ring systems, film processing machinery, spin machine, printing machinery. Specifications Product Name: Pillow Block Bearing Package Content: 4pcs x Pillow Block Bearing Material: Zinc Alloy, Bearing Steel Color: Gray Weight: 112g Model: KFL08 Overall Size: 48(+/-2) x 27(+/-2) x 12(+/-2)mm/1.9-inch x 1.06-inch x 0.47-inch(L*W*H) Bearing Inner Dia.: 8mm/0.31-inch Mounting Hole Diameter: 5mm/0.2-inch Mounting Hole Distance: 37mm/1.46-inch.
Omar H
2025-09-03 15:09:08
Everyone is complaint about the bearing not being seated dead straight but it’s an easy fix. Other than that’s it’s works just fine.
Emily
2025-08-08 18:01:58
They work, and are probably 10x cheaper than buying something from one of the usual industrial suppliers. You probably get what you pay for but they seem to get the job done for what I need.
guitar man
2025-07-12 12:26:59
These bearings have a lot, and I mean a lot of wobble. I tried using them, but finally gave up. They were a waste of my money since I can't really use them.
Norman R. West
2025-07-05 18:46:57
I think they will work, not real good construction
Russell 1
2025-06-16 14:47:47
This is a good bearing. Strong and durable and is rolls easy
DotScott1
2025-05-19 10:09:16
These are ok for the most part but they get stuck A LOT! I mean in terms of the angle of the bearing - they will move around just fine in about every angle except for straight - in which it gets jammed pretty hard and won't go perfectly straight - which can cause problems. Lubricant baths didn't do the trick so I ended up ever so slightly sanding the inner part down a bit so that it would move around more easily.Overall they're just "ok" but not great because of that problem. I hope this input can help the manufacturers build a better product.
J
2025-05-16 13:07:42
3 out of 4 bearings are stuck and don't self align. I can move them with a long rod, yet it takes so much force to budge them that they end up moving further than I'd like. What is the deal with these pillow block bearings??
MARCO SILVA
2025-03-15 15:13:09
Excelente producto.
Customer
2025-03-13 14:41:33
These bearings are great. Ordered 4 to use on my custom-built CNC machine.A lot of people in the comments complaining that the bearings are not straight within the retaining block. That's because these are self-aligning bearings! The bearing itself has a slightly concave outer profile, and the retaining block has a convex hole. This means the bearing can rotate and pivot in any direction, inside the block, without falling out. This is to compensate for any misalignment of the surface the block is mounted on, and the shaft going through the bearing. This is a FEATURE, not a flaw. A bit of force may be needed to move the bearing initially though. You can also twist the bearing completely 90 degrees and unmount it from the block.
Wizzbangrobbo
2025-03-12 11:46:31
They solve the alignment problem with ease.I have 200 mm 8mm shaft and fitted the bearings.Being used in a gearbox external application.Light duty of course 5kg load no sign of heat build up or excess noise.
JOSE JUAN HERRERA MORENO
2025-03-10 13:10:10
CUMPLIO CON LO QUE REQUERIA
Stefano
2025-02-25 13:14:06
4 out of 4 are nor straight loosing the whole purpose of been a precise pice of machinery.
JOSE RICARDO JIMENEZ GONZALEZ
2025-01-18 18:13:32
EN LA APLICACION PARA EL MOVIMIENTO DE UNA CUNA EXCELENTES
Recommended Products
