Your cart is empty.
Your cart is empty.Product Description
Information
Taps can be divided into straight flute thread taps, spiral flute thread taps, spiral point thread taps and thread forming taps. They are also divided into hand taps and machine taps according to the usage.
Hand taps are operated by tap wrenches. Machine taps are suggested to be used with tap collets with overload protection, and hand use or electric drills use is easy to cause breakage to the tap.
Metric Hand Taps
Taper /Bottom Tap
Taper Tap: Start the thread and guide it into the workpiece, commonly used when tapping through holes. Bottom Tap: Generate threads close to the bottom of a blind hole.
Straight Flute Tap
Thread tap provides fast downward chip removal for efficient threading, clear threads without burrs, universal square shank.
Uncoated Tap
Uncoated taps provide good cutting performance and can be used for threading a wide range of applications.
9SiCr Alloy Tool Steel
- Offer excellent hardness, toughness and wear resistance for durability and long-lasting performance.
Wide Applications
The hand tap set is used to re-thread damaged or jammed threads, or to create new threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.
The tap set is mainly for hand use, and is used with a tap wrench. Apply appropriate cutting lubricant or oil during the tapping process for higher quality threads and more durable screw taps.
Angela
2025-08-26 09:56:35
Use one of the taps to start the thread repair and then grind the tip flat on the other to make a bottoming tap. Use the ground tap to finish repairing the threads.
Jason Oakes
2025-08-09 09:33:55
I stripped the threads off an 02 sensor. I’ve tested almost every extraction type tool to its limit and many failed . There are not that many products that are made well with . not just material , the actual design. These have a nice lead going into the thread. And they are the prefect length shaft not too long so they fit in tighter places..,
Erik Donaldson
2025-08-03 16:19:06
They worked. It's nice to have a set of bottoming and regular taps, wish I had that for every size
craig
2025-07-02 13:57:54
Interior paper and plastic was open and the tap was loose in the bag. Some rust was visible on the loose tap. Not enough to prevent it from working. A 10 mm socket fits for a handle to turn it if a tap handle is not available
Gordon Hamon
2025-06-06 12:13:37
Did a great job
John B.
2025-05-24 16:32:44
Fixed the bad starter threads on 3 WIX Oil Filters for my 2005 Honda CRV. I lost my receipt and Advanced did not show my purchase on their website.
gary strohl
2025-03-26 15:36:11
it worked
Flash9
2025-03-05 18:13:02
I had four M14 x1.5 bolts that did not want to thread into a couple lower control arms.These did a great job of cleaning up the threads.I am so glad I did not try to force the bolts into the control arms without cleaning the threads.
michael r.
2025-03-03 15:47:37
Worked perfect fit tapping o2 sensor thread.
Kandace Aylward
2025-02-18 16:59:25
They were the correct size and worked great.
Recommended Products